MXR M104

MXR® Distortion+ Instruction Manual

Загвар: M104 | Брэнд: MXR

1. Танилцуулга

The MXR Distortion+ is a classic guitar effects pedal known for its distinctive distortion sounds. This compact unit is designed to deliver a range of tones from subtle overdrive to classic hard rock distortion. Its germanium-powered, soft-clipped distortion circuit has been a staple on countless recordings, offering a unique sonic character.

Гол онцлогууд:

  • Germanium-powered, soft-clipped distortion
  • Classic 70s distortion
  • Classic early ’80s hard rock tone
  • Авсаархан, удаан эдэлгээтэй загвар

2. Тохиргоо

Before connecting your MXR Distortion+ pedal, ensure your amplifier is turned off. This prevents any potential damage to your equipment.

Холболтууд:

  1. Гитараа холбоно уу ОРОЛТ стандарт 1/4 инчийн багажны кабель ашиглан дөрөөний баруун талд байрлах домкратыг холбоно уу.
  2. -г холбоно уу ГАРЦ дөрөөний зүүн талд байгаа үүрийг чинийх рүү чиглүүл ampөргөгч төхөөрөмжийн оролтыг өөр 1/4 инчийн багажны кабель ашиглан хийнэ.

Дөрөөг асаах:

The MXR Distortion+ can be powered by a 9V battery or an optional 9V DC power adapter (center negative).

  • Батерей суурилуулах: To install a 9V battery, remove the bottom plate of the pedal by unscrewing the four screws. Connect the battery to the clip and place it inside the enclosure before reattaching the bottom plate.
  • Эрчим хүчний адаптер: Connect a 9V DC power adapter (not included) to the power jack on the side of the pedal.
MXR Distortion+ side view showing input, output, and power jacks

Зураг: хажуу тал view of the MXR Distortion+ pedal, highlighting the input, output, and 9V power jacks.

MXR Distortion+ bottom view for battery access

Зураг: Доод талд view of the MXR Distortion+ pedal, showing the four screws that secure the battery compartment.

3. Хяналтууд

The MXR Distortion+ features two primary control knobs and a footswitch for activation.

MXR Distortion+ top view showing Output and Distortion knobs

Зураг: дээд view of the MXR Distortion+ pedal, clearly showing the 'Output' and 'Distortion' control knobs.

  • Гарах тос: This knob controls the overall output volume of the effect. Turn clockwise to increase volume, counter-clockwise to decrease.
  • ГАЗРАЛ: This knob adjusts the amount of distortion applied to your signal. Turn clockwise for more distortion, counter-clockwise for less.
  • ХӨЛСӨГЧ: Toggles the effect on/off. The LED illuminates when the effect is active.

4. Ажиллаж байгаа

The MXR Distortion+ is straightforward to operate, allowing you to quickly dial in a variety of distorted tones.

  • Classic Blues Tones: Set the DISTORTION control low (e.g., 9 o'clock to 12 o'clock) and adjust the OUTPUT knob to drive the front end of your amplifier. This will produce a warm, overdriven blues tone.
  • Early '80s Hard Rock: Max out the DISTORTION knob (e.g., 3 o'clock to full clockwise) for a powerful, saturated hard rock tone. Adjust OUTPUT to match your desired volume.
  • Subtle Boost/Overdrive: For a cleaner boost with a touch of grit, set DISTORTION very low and OUTPUT to unity gain or slightly above.

Demonstration Videos (for related MXR pedals):

Video: MXR Custom Badass Modified Overdrive, 78 Distortion M77, M78. This video demonstrates the sound of related MXR distortion and overdrive pedals.

Video: MXR Sugar Drive Pedal M294. This video demonstrates the sound of a related MXR overdrive pedal.

5. Техникийн үзүүлэлтүүд

Загварын дугаарM104
Зүйлийн жин1 фунт
Бүтээгдэхүүний хэмжээс5.5"L x 2.5"W x 4.5"H
Биеийн материалGermanium, Plastic
ӨнгөШар
Эрчим хүчний эх үүсвэрБатерейгаар ажилладаг (1 x 9V батерей шаардлагатай)
Ботьtage9.0 В
Дохионы форматАналог
Холбогч төрөл1/4 инчийн аудио

6. Засвар үйлчилгээ

  • Цэвэрлэгээ: Зөөлөн, хуурай даавуугаар дөрөөг цэвэрлэ. Зүлгүүрийн цэвэрлэгч болон уусгагч бодисоос зайлсхий.
  • Хадгалах: Дөрөөг хуурай орчинд, хэт өндөр температур болон нарны шууд тусгалаас хол хадгална уу.
  • Зайны хугацаа: If using a battery, disconnect the input cable when not in use to conserve battery life. Remove the battery if the pedal will not be used for an extended period.

7. Алдаа засах

  • Дуугүй:
    • Бүх кабелийн холболтыг шалгана уу (гитараас оролт руу, гаралт руу) amp).
    • Ensure the pedal is receiving power (check battery or power adapter).
    • Verify your guitar and ampөргөгч зөв ажиллаж байна.
  • Сул эсвэл гажуудсан дуу чимээ (гэнэтийн):
    • Replace the 9V battery if it's low.
    • Ensure the power adapter meets the 9V DC (center negative) specification.
    • Adjust the OUTPUT and DISTORTION knobs to find your desired tone.

8. Баталгаат хугацаа ба дэмжлэг

This product is covered by the manufacturer's warranty. For detailed warranty information or technical support, please refer to the official MXR webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Баталгаат нэхэмжлэл гаргахын тулд худалдан авалтаа нотлох баримтаа хадгалаарай.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.