Behringer DJX400

Танилцуулга

This instruction manual provides comprehensive guidance for the Behringer DJX400 2-channel DJ Mixer. It covers essential information regarding product setup, operational procedures, maintenance, and troubleshooting. Familiarize yourself with this manual to ensure optimal performance and longevity of your DJX400 mixer.

Урд view of the Behringer DJX400 DJ Mixer, showing its two channels, faders, EQ controls, crossfader, and master section.

Тохиргоо

Follow these steps to properly set up your DJX400 mixer.

1. Савлах, шалгах

• Холигчийг сав баглаа боодолоос нь болгоомжтой авч хая.
• Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
• Ensure all accessories, including the power cable, are present.

2. Аудио эх сурвалжуудыг холбох

The DJX400 features two dual-input stereo channels. Each channel can accept either PHONO (turntable) or LINE (CD player, media player) level signals.

• PHONO Inputs (RCA): Connect turntables to the PHONO inputs. Ensure your turntables have a ground wire connected to the mixer's ground terminal (if available) to reduce hum.
• LINE Inputs (RCA): Connect CD players, media players, or other line-level audio devices to the LINE inputs.
• MIC Input (1/4" TRS): Connect a microphone to the 1/4" TRS input on the front panel.

3. Аудио гаралтыг холбох

• MASTER Output (RCA): Connect this output to your main PA system or amplifier. This is your primary audio output.
• BOOTH Output (RCA): Connect this output to a monitor speaker system in your DJ booth. This allows you to hear your mix independently of the main output.
• REC гаралт (RCA): Connect this output to a recording device (e.g., a digital recorder, computer audio interface) to capture your mix.
• HEADPHONE Output (1/4" TRS): Connect your headphones to this jack for monitoring.

4. Эрчим хүчний холболт

• Холигчийн цахилгаан унтраалга OFF байрлалд байгаа эсэхийг шалгаарай.
• Connect the provided power cable to the mixer's power inlet and then to a suitable AC power outlet.
• Power on your audio sources and amplifiers before turning on the mixer.
• Finally, switch the DJX400 power ON.

Ажиллаж байна

This section details the functions of the DJX400's controls and how to operate the mixer.

1. Сувгийн хяналт

Each of the two stereo channels features the following controls:

• INPUT SELECT Switch: Toggles between PHONO and LINE inputs for the respective channel.
• GAIN хяналт: Adjusts the input sensitivity for the channel. Set this so the channel's peak LED occasionally flashes, but does not stay lit.
• 3-Band KILL EQ: Provides -32 dB attenuation for HIGH, MID, and LOW frequencies. Use these to sculpt the sound of each track.
• CHANNEL FADER: Сувгийн дууны түвшинг хянадаг.
• PFL (Pre-Fader Listen) Button: Routes the channel's audio to the headphone output for monitoring before it reaches the main mix.

2. Crossfader

The DJX400 features a super-smooth dual-rail "Ultraglide" crossfader designed for up to 500,000 life cycles.

• Кроссфэйдер: Blends between Channel 1 and Channel 2. Moving it to the left emphasizes Channel 1, and to the right emphasizes Channel 2.
• CROSSFADER CURVE Control: Adjusts the response curve of the crossfader. A sharp curve is ideal for scratching, while a smooth curve is better for blending.

3. Master Section

• МАСТЕР ТҮВШИН: Controls the overall output volume of the mixer to the main PA system.
• БҮЛЭГНИЙ ТҮВШИН: Adjusts the volume of the BOOTH output for your monitor speakers.
• МИКРИЙН ТҮВШИН: Controls the volume of the microphone input.
• XPQ 3D SURROUND: Activates and adjusts the XPQ 3D surround effect, which widens the stereo image and adds transparency to the sound. Turn the knob to increase the effect.

4. Headphone Section

• чихэвчний түвшин: Чихэвчний гаралтын дууны хэмжээг тохируулна.
• PFL/MAIN MIX Control: Blends between the PFL (pre-fader listen) signal and the main mix in your headphones.
• SPLIT/STEREO Switch: In SPLIT mode, the PFL signal is sent to one ear and the main mix to the other. In STEREO mode, both signals are mixed in stereo.

5. BPM Counter

The intelligent dual auto-BPM counter displays the beats per minute for both channels, aiding in beatmatching.

• The display shows the BPM for the active channel or the channel selected for PFL.
• Use the BPM display to visually match the tempo of two tracks before crossfading.

Засвар үйлчилгээ

Proper maintenance ensures the longevity and reliable operation of your DJX400 mixer.

Цэвэрлэгээ

• Always disconnect the mixer from power before cleaning.
• Гаднах гадаргууг арчихын тулд зөөлөн, хуурай, хөвөнгүй даавуу ашиглаарай.
• Зөрүүд шороонд бага зэрэг damp Зөөлөн савантай даавуу хэрэглэж болно, дараа нь хуурай даавуугаар арчина.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
• Keep faders and knobs free from dust and debris. Compressed air can be used carefully to clear dust from crevices.

Хадгалах

• Ашиглаагүй үед холигчийг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
• Protect the mixer from dust by covering it with a dust cover.

Алдааг олж засварлах

This section addresses common issues you might encounter with your DJX400 mixer.

Үзүүлэлтүүд

Key technical specifications for the Behringer DJX400 DJ Mixer:

Баталгаат болон дэмжлэг

Behringer-ийн бүтээгдэхүүнүүд нь найдвартай, гүйцэтгэлд зориулагдсан. Баталгаат байдлын дэлгэрэнгүй мэдээлэл болон техникийн дэмжлэг авахыг хүсвэл албан ёсны Behringer-ээс лавлана уу webсайт эсвэл орон нутгийн эрх бүхий борлуулагчтай холбоо барина уу. Худалдан авалтын баримтаа аливаа баталгаат нэхэмжлэлийг худалдан авсан баримт болгон хадгална уу.

• Онлайн дэмжлэг: Албан ёсны Берингерт зочлоорой webТүгээмэл асуултууд, програм хангамж татаж авах болон дэмжлэгийн эх сурвалжуудын сайт.
• Үйлчилгээний төвүүд: Засвар, засвар үйлчилгээ хийх эрх бүхий үйлчилгээний төвүүдийг олоорой.