LFI Lights Combo Red Exit Sign with Emergency Lights User Manual

1. Танилцуулга

This manual provides detailed instructions for the installation, operation, and maintenance of the LFI Lights Combo Red Exit Sign with Emergency Lights, Model COMBO2-R-W-BB. This unit is designed to provide clear exit indication and emergency illumination during power outages, ensuring compliance with safety regulations.

Аюулгүй байдлын чухал мэдээлэл

WARNING: Read all instructions carefully before installation. Failure to do so may result in electric shock, fire, or other hazards that could cause injury or death.

• Энэхүү бүтээгдхүүнийг уг бүтээц, ашиглалт, учирч болох аюулын талаар сайн мэддэг хүн холбогдох суурилуулах кодын дагуу суурилуулсан байх ёстой.
• Ensure the main power supply is disconnected before installation or servicing.
• This unit is UL 924 Listed, and complies with NEC, OSHA, and NFPA 101 Life Safety Code standards.
• Хийн болон цахилгаан халаагуурын ойролцоо бүү суурилуул.
• Do not allow power supply cords to be subjected to undue stress.
• The unit is designed for damp locations but should not be exposed to direct water spray or submersion.

Figure 1: LFI Lights Combo Red Exit Sign with Emergency Lights, showing the red "EXIT" sign and two adjustable LED emergency light heads.

2. Тохиргоо ба суурилуулалт

This unit is designed for hardwired installation and comes with a universal mounting plate for various mounting options (ceiling, wall, end). Ensure all local and national electrical codes are followed during installation.

2.1 Суурилуулалт

1. Цахилгааныг салгах: Суурилуулалтыг эхлүүлэхийн өмнө хэлхээний таслуурын үндсэн тэжээлийн хангамжийг унтраа.
2. Суулгах байршлыг сонгох: Choose a suitable location that provides clear visibility for the exit sign and adequate illumination from the emergency lights.
3. Орон сууц бэлтгэх: Remove the faceplate and diffuser from the unit. The housing is injection-molded, 5VA flame retardant thermoplastic.
4. Суурилуулах хавтан: Secure the universal mounting plate to the junction box or mounting surface using appropriate hardware (not included).
5. Утасны холболтууд: Connect the unit's wires to the building's electrical supply (120/277 VAC operation).
   • Connect the black wire to 120V AC supply.
   • Connect the red wire to 277V AC supply.
   • Цагаан утсыг төвийг сахисан утас руу холбоно.
   • Cap off any unused wires.

Figure 2: Internal wiring and battery compartment. Ensure proper wire connections and battery installation.

2.2 Зайны холболт

The unit includes a long-lasting NiCad battery. Connect the battery pack to the circuit board. Ensure the connection is secure. The battery is designed for low maintenance and provides backup power during outages.

2.3 Эцсийн чуулган

1. Knock-out Arrows: If required, use the knock-out arrows on the faceplate to indicate the direction of exit.
2. Reattach Faceplate: Securely reattach the faceplate and diffuser to the housing.
3. Эрчим хүчийг сэргээх: Once installation is complete and all connections are secure, restore power to the unit at the circuit breaker.

3. Ашиглалтын заавар

3.1 Initial Operation and Charging

Upon initial power-up, the unit will begin charging its battery. Allow at least 24 hours for the battery to fully charge before conducting the first test. The AC indicator light (usually green) will illuminate when AC power is present and the battery is charging.

Figure 3: AC indicator light and test button. The green light indicates AC power is present.

3.2 Төхөөрөмжийг турших

Regular testing is crucial to ensure the unit functions correctly during a power outage.

1. Сарын тест: Press and hold the "TEST" button for approximately 30 seconds. The emergency lights should illuminate, and the exit sign should remain lit (if applicable). Release the button; the lights should turn off, and the AC indicator should re-illuminate.
2. Жилийн тест: Disconnect AC power to the unit for a minimum of 90 minutes. The emergency lights and exit sign should remain illuminated for the entire duration. Reconnect AC power; the unit should return to normal operation and begin recharging.

3.3 Adjusting Emergency Light Heads

The two square emergency light heads are adjustable, allowing for optimal light direction. They can rotate 360 degrees and pivot 180 degrees to direct light where needed most.

Figure 4: Illustration of the adjustable emergency light heads, demonstrating their full range of motion.

4. Засвар үйлчилгээ

The LFI Lights Combo Exit Sign is designed for low maintenance. However, periodic checks are recommended to ensure optimal performance.

• Цэвэрлэгээ: Clean the exterior of the unit and light heads periodically with a soft, damp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
• Зай: The NiCad battery is long-lasting. If the unit fails the monthly or annual test, the battery may need replacement. Contact a qualified electrician for battery replacement.
• Шалгалт: Periodically inspect the unit for any visible damage, loose connections, or signs of wear.

5. Алдаа засах

Нийтлэг асуудлууд болон тэдгээрийн шийдлүүдийг доорх хүснэгтээс харна уу.

6. Техникийн үзүүлэлтүүд

• Загварын дугаар: COMBO2-R-W-BB (FBA_COMBOR2)
• Брэнд: Хөнгөн бэхэлгээний үйлдвэрүүд
• Оролтын хэмжээtage: 120/277 VAC
• Гэрлийн төрөл: All LED (Exit Sign and Emergency Heads)
• Зайны төрөл: NiCad (Nickel-Cadmium), 1 Product Specific battery required (included)
• Орон сууцны материал: Injection molded, 5VA flame retardant thermoplastic
• Өнгө: Цагаан орон сууц
• Хэмжээ: Ойролцоогоор 20 x 2 x 8 инч (50.8 x 5.08 x 20.32 см)
• Бүтээгдэхүүний хэмжээ (L x W): 19.22"L x 8.13"W
• Барааны жин: 2 фунт (0.91 кг)
• Суурилуулах төрөл: Universal (Ceiling Mount, Wall Mount, End Mount)
• Дагаж мөрдөх: UL 924 Listed, NEC, OSHA, NFPA 101 Life Safety Code
• Хамгаалалт: Богино холболт, ботьtage surge, brown out, and low battery voltage disconnect protected.
• Байршлын үнэлгээ: Damp Байршлыг жагсаасан

7. Баталгаат хугацаа ба дэмжлэг

7.1 Буцаах бодлого

This product is subject to a 30-day refund/replacement return policy from the date of purchase. Please refer to your retailer's specific return guidelines for detailed information.

7.2 Техникийн дэмжлэг

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Light Fixture Industries directly. Refer to the contact information provided with your purchase or visit the official Light Fixture Industries webТусламжийн дэлгэрэнгүй мэдээллийг сайтаас авна уу.

Үйлдвэрлэгч: Хөнгөн бэхэлгээний үйлдвэрүүд

Худалдагч: Light Fixture Industries (via Amazon Fulfillment)

Дэлгэрэнгүй мэдээллийг авахыг хүсвэл дараах хаягаар зочилж болно Light Fixture Industries Store on Amazon.