Solaxx SALTDIP™ 2-in-1 Electronic Salt Water Tester (Model NP2064) Instruction Manual

1. Оршил ба түүнээс дээшview

The Solaxx SALTDIP™ 2-in-1 Electronic Salt Water Tester provides a fast and accurate method for measuring salt content and water temperature. This device eliminates the need for traditional reagents or test strips, offering digital readouts for confident results without color matching. It is designed for use in pools, spas, ponds, and aquariums.

Гол онцлогууд нь:

• Rugged water resistant housing
• Commercial grade technology sensor
• Easy push buttons
• Large LCD readouts
• Temperature F°/C° toggle button

2. Аюулгүй байдлын мэдээлэл

Please read and understand all safety instructions before using the device. Proper handling ensures accurate readings and prolongs the life of your tester.

• Always wear protective eyewear and gloves when handling any chemical reagents or solutions.
• Avoid direct contact between test solutions and skin, eyes, nose, and mouth.
• Read all instructions and labels on any reagents thoroughly before use.
• Keep all reagents and testing equipment out of the reach of children and pets.
• Wash hands thoroughly with soap and water after each use.
• Dispose of used reagents and equipment according to local regulations.

3. Багцын агуулга

Савыг задлахдаа бүх зүйл байгаа бөгөөд сайн нөхцөлд байгаа эсэхийг шалгаарай:

• Solaxx SALTDIP™ 2-in-1 Electronic Salt Water Tester Unit
• Protective Sensor Cap
• Sample Collection Cup (integrated or separate)
• 2 AAA батерей (урьдчилан суулгасан эсвэл тусдаа)
• Зааварчилгааны гарын авлага / лавлах гарын авлага

4. Тохиргоо

4.1 Батерей суурилуулах

The SALTDIP™ tester requires 2 AAA batteries. If not pre-installed, open the battery compartment located at the top of the unit, insert the batteries observing polarity, and securely close the compartment.

4.2 Анхны бэлтгэл

Before first use, remove the protective sensor cap. If a small sponge is present inside the cap, ensure it is slightly moistened with clean water before replacing the cap for storage. This helps maintain sensor integrity.

Figure 1: Solaxx SALTDIP™ tester with protective cap removed, revealing the sensor probes.

5. Ашиглалтын заавар

5.1 Асаах/унтраах

Цахилгаан товчийг удаан дар (⏻) to turn the unit on or off. The LCD display will illuminate.

5.2 Хэмжилтийн горимыг сонгох

The SALTDIP™ tester can measure salt content (PPM) and water temperature. Use the 'MODE/CAL' button to cycle through available measurement modes. Ensure 'SALT' is displayed on the screen for salt readings.

5.3 Хэмжилт хийх

1. Ус цуглуулample using the integrated cup or a clean, separate container.
2. Ensure the sensor probes at the bottom of the tester are clean.
3. Immerse the sensor end of the tester into the water sample, ensuring the probes are fully submerged but not exceeding the 'MAX IMMERSION LINE' if indicated.
4. Wait a few seconds for the reading to stabilize on the LCD display.
5. Record your readings.

Figure 2: The Solaxx SALTDIP™ tester ready for use, displaying its digital interface.

5.4 Температурын нэгжийг өөрчлөх

Press the 'HOLD/TEMP' button to toggle between Fahrenheit (F°) and Celsius (C°) temperature readings.

Figure 3: Key features of the SALTDIP™ tester, including the temperature toggle button.

6. Уншсан материалыг ойлгох

The SALTDIP™ tester provides readings for salt content in Parts Per Million (PPM) and water temperature. Refer to your pool, spa, or aquarium manufacturer's guidelines for ideal salt and temperature ranges.

For swimming pools, a common ideal salt range is typically between 2700-3400 PPM. Readings outside this range may indicate a need for adjustment:

• < 2700 PPM: Poor disinfection effect.
• 2700-3400 PPM: Ideal Range.
• 3400-4500 PPM: Marginally Acceptable.
• > 4500 PPM: Highly Corrosive.

Figure 4: The SALTDIP™ tester measures both salt content and water temperature.

7. Засвар үйлчилгээ

7.1 Мэдрэгчийг цэвэрлэх

After each use, rinse the sensor probes thoroughly with clean tap water to remove any residue from the tested water. This prevents buildup and ensures accurate future readings.

7.2 Хадгалалт

Always replace the protective sensor cap after cleaning. Store the tester in a cool, dry place away from direct sunlight and extreme temperatures. If the cap contains a sponge, ensure it remains slightly moist to protect the sensor.

8. Алдаа засах

• Буруу эсвэл зөрчилтэй уншилтууд: Ensure the sensor probes are clean. Re-calibrate the device if necessary (refer to the included reference guide for calibration steps). Check battery levels and replace if low.
• Dim or Blank LCD Display: This typically indicates low battery power. Replace the 2 AAA batteries.
• Төхөөрөмж асахгүй байна: Батерейны суурилуулалтыг шалгаж, батерей нь шинэ эсэхийг шалгаарай.

If issues persist after attempting these troubleshooting steps, please contact customer support.

9. Техникийн үзүүлэлтүүд

• Брэнд: Solaxx
• Загварын дугаар: NP2064
• Эрчим хүчний эх үүсвэр: Батерейгаар ажилладаг (2 AAA батерей шаардлагатай, багтсан)
• Өнгө: Хар
• Барааны жин: 2.4 унц (0.15 фунт)
• Бүтээгдэхүүний хэмжээс (L x W x H): 6 x 2 x 11 инч
• Дээд температурын үнэлгээ: Цельсийн 100 градус
• UPC: 859535002207
• Үйлдвэрлэгч: SCP Distributors LLC (Pool Corp)

10. Баталгаат хугацаа ба дэмжлэг

The Solaxx SALTDIP™ 2-in-1 Electronic Salt Water Tester comes with a 1 жилийн хязгаарлагдмал баталгаат хугацаа. For warranty claims, technical support, or any questions regarding the product, please contact SCP Distributors LLC (Pool Corp) customer service.

Баталгаат баталгааг баталгаажуулахын тулд худалдан авалтаа баталгаажуулна уу.