1-Light Clear Flat Glass Traditional Outdoor Wall Lantern Light

Танилцуулга

This instruction manual provides detailed guidance for the safe installation, operation, and maintenance of your new Progress Lighting Outdoor Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation and care will ensure optimal performance and longevity of your lighting fixture.

Зураг: Урд view of the 1-Light Clear Flat Glass Traditional Outdoor Wall Lantern Light in Antique Bronze finish.

Аюулгүй байдлын мэдээлэл

• АНХААРУУЛГА: Цахилгаанд цохиулах эрсдэл. Суурилуулалт, засвар үйлчилгээ хийхээс өмнө таслуур эсвэл гал хамгаалагчийн хүчийг салга.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring installations.
• Use only UL/cUL listed wire connectors.
• This fixture is designed for outdoor use and is suitable for wet locations.
• Хамгийн их ватаас хэтрэхгүйtagчийдэнгийн хувьд заасан e.
• Суурилуулалтын явцад хамгаалалтын шил, бээлий өмс.

Багцын агуулга

Доор жагсаасан бүх хэсгүүд таны багцад байгаа эсэхийг шалгана уу.

• A. Fixture Body (1)
• B. Mounting Plate (1)
• C. Mounting Screws (2)
• D. Wire Connectors (3)
• E. Decorative Nuts (2)
• F. Glass Panels (4, pre-installed)

Үзүүлэлтүүд

Image: Diagram showing the width (4.5 inches) and height (8 inches) of the wall lantern.

Суулгах гарын авлага

Follow these steps for proper installation of your outdoor wall lantern. It is recommended to watch the accompanying video for visual guidance on sizing and placement.

Шаардлагатай хэрэгслүүд:

• Филлипсийн толгой халив
• Хавтгай халив
• Утас тайлагч
• Цахилгаан соронзон хальс (заавал биш)
• Хамгаалалтын шил

Урьдчилсан суурилуулалт:

1. Цахилгааныг унтраах: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the main power switch.
2. Агуулгыг задлах: Carefully remove all components from the packaging. Keep the packaging materials until installation is complete to ensure no small parts are lost.
3. Review existing wiring: Ensure the existing electrical box is securely mounted and capable of supporting the fixture's weight.

Тоног төхөөрөмжийг суурилуулах:

1. Attach the mounting plate (B) to the electrical box using the mounting screws (C). Ensure the plate is level and secure.
2. Pull the electrical wires from the electrical box through the center hole of the mounting plate.

Утасны холболтууд:

1. Connect the bare copper ground wire from the fixture to the bare copper ground wire from the electrical box using a wire connector (D). If your electrical box has a ground screw, wrap the fixture's ground wire around it before connecting to the supply ground wire.
2. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the electrical box using a wire connector (D).
3. Connect the black (hot) wire from the fixture to the black (hot) wire from the electrical box using a wire connector (D).
4. Ensure all wire connections are secure. Wrap electrical tape around the wire connectors for added insulation if desired.

Бэхэлгээний хамгаалалт:

1. Carefully push all excess wiring into the electrical box.
2. Align the holes on the fixture body (A) with the threaded posts on the mounting plate (B).
3. Secure the fixture body to the mounting plate using the decorative nuts (E). Tighten firmly but do not overtighten.

Булцуу суурилуулах:

1. Insert one medium base (E26) bulb (not included) into the socket. Do not exceed the maximum recommended wattage 100 ватт.

Зураг: хажуу тал view of the wall lantern with a clear incandescent bulb installed, showing the internal socket.

Sizing and Selection Guidance Video:

For additional guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, please watch the official Progress Lighting video below:

Video: An official Progress Lighting guide on sizing and selecting outdoor lighting fixtures, covering optimal placement for entryways, garages, and other outdoor areas.

Ашиглалтын заавар

Once the fixture is securely installed and wired, restore power at the circuit breaker. The light fixture can then be operated using your wall switch or external control system (if applicable).

Засвар үйлчилгээ

• Цэвэрлэгээ: Төхөөрөмжийг цэвэрлэхийн тулд цахилгааныг унтраагаад хөргөхийг хүлээнэ үү. Зөөлөн, d даавуугаар арчина.amp даавуу. Зүлгүүрийн цэвэрлэгч эсвэл уусгагч хэрэглэж болохгүй, учир нь тэдгээр нь өнгөлгөө эсвэл шилийг гэмтээж болзошгүй.
• Булцуу солих: Ensure power is off before replacing the bulb. Allow the bulb to cool completely before touching. Replace with a new medium base (E26) bulb, not exceeding 100 Watts.
• Тогтмол үзлэг: Бүх холболт болон бэхэлгээний бэхэлгээний нягтыг үе үе шалгаж байх хэрэгтэй.

Алдааг олж засварлах

Баталгаат болон дэмжлэг

Progress Lighting products are manufactured to the highest standards and are backed by a limited warranty. For specific warranty details, technical support, or replacement parts, please visit the official Progress Lighting webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.

Дэлгэрэнгүй мэдээлэл авахыг хүсвэл зочилно уу: Амазон дээрх Progress Lighting Store