Einhell Rotary Hammer TC-RH 800 E Instruction Manual

1. Танилцуулга

Thank you for choosing the Einhell TC-RH 800 E Rotary Hammer. This powerful tool is designed for drilling, hammer drilling, and chiseling in concrete, masonry, wood, and metal. It features an 800W motor, 2.5 Joules of impact energy, and an SDS Plus chuck for quick and secure bit changes. Please read this manual thoroughly before operating the tool to ensure safe and efficient use.

2. Аюулгүй ажиллагааны ерөнхий заавар

Always observe the following safety precautions when using power tools:

• Ажлын талбайн аюулгүй байдал: Ажлын талбайг цэвэр, гэрэлтүүлэгтэй байлгах. Эмх замбараагүй эсвэл харанхуй газар осол аваар гарахыг өдөөдөг. Шатамхай шингэн, хий, тоос зэрэг тэсрэх аюултай орчинд цахилгаан хэрэгслийг бүү ажиллуул.
• Цахилгааны аюулгүй байдал: Цахилгаан хэрэгслийн залгуур нь залгууртай тохирч байх ёстой. Залгуурыг хэзээ ч бүү өөрчил. Хоолой, радиатор, тавиур, хөргөгч зэрэг газардуулсан эсвэл газардуулсан гадаргуутай бие махбодид хүрэхээс зайлсхий.
• Хувийн аюулгүй байдал: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Хэрэгслийн хэрэглээ ба арчилгаа: Цахилгаан хэрэгслийг хүчээр бүү хий. Хэрэглээнд тохирох цахилгаан хэрэгслийг ашигла. Аливаа тохируулга хийх, дагалдах хэрэгслийг солих, цахилгаан хэрэгслийг хадгалахын өмнө залгуурыг тэжээлийн эх үүсвэрээс салга.
• Үйлчилгээ: Цахилгаан хэрэгсэлээ зөвхөн ижил солих эд ангиудыг ашиглан мэргэшсэн засварчинд үйлчилгээ үзүүлээрэй. Энэ нь цахилгаан хэрэгслийн аюулгүй байдлыг хангах болно.

3. Бүтээгдэхүүний бүрэлдэхүүн хэсгүүд

Familiarize yourself with the main components of your Einhell TC-RH 800 E Rotary Hammer:

• SDS Plus Чак
• Туслах бариул
• Гүн зогсолт
• Mode Selector Switch (Drill, Hammer Drill, Chisel)
• Rotation Direction Switch (Forward/Reverse)
• On/Off Trigger with Speed Control
• Lock-on Button (for continuous operation)

Зураг 1: Илүүview of the Einhell TC-RH 800 E Rotary Hammer.

Figure 2: The rotary hammer in use, demonstrating its application for drilling into a wall.

Зураг 3: Ойрын зураг view of the SDS Plus chuck, designed for quick and secure bit changes.

Figure 4: Detail of the rotation direction switch, allowing selection between forward and reverse rotation.

Figure 5: The ergonomic main handle designed for comfortable and secure grip.

Figure 6: The adjustable depth stop, used to set a precise drilling depth.

Figure 7: Einhell brand logo prominently displayed on the tool body, indicating authenticity.

4. Тохиргоо

4.1 Туслах бариулыг бэхлэх

The auxiliary handle provides additional grip and control. Loosen the auxiliary handle by turning it counter-clockwise. Slide it onto the tool body to the desired position and tighten it clockwise.

4.2 Installing the Depth Stop

Insert the depth stop rod into the designated hole on the auxiliary handle. Adjust the depth stop to the required drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.

Figure 8: The SDS Plus chuck with the depth stop rod correctly installed.

4.3 Inserting SDS Plus Drill Bits/Chisels

1. Clean the shank of the drill bit or chisel and apply a thin layer of grease.
2. Pull back the chuck sleeve and insert the bit into the chuck, rotating it slightly until it engages.
3. Release the chuck sleeve. Pull the bit to check if it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.

5. Ашиглалтын заавар

5.1 горимын сонголт

The mode selector switch allows you to choose the appropriate operating mode:

• Өрөмдлөг (Зөвхөн эргэлт): For drilling in wood, metal, or plastics.
• Hammer Drilling (Rotation with Impact): For drilling in concrete and masonry.
• Chiseling (Impact Only): For light chiseling work, such as removing tiles or plaster.

To change the mode, rotate the selector switch to the desired symbol. Ensure the tool is unplugged before changing modes, especially for chiseling, to prevent accidental activation.

5.2 Асаах/унтраах болон хурдны хяналт

Press the On/Off trigger to start the tool. The speed is variable depending on how far you press the trigger. For continuous operation, press the lock-on button while the trigger is fully depressed. To switch off, release the trigger or press it again if the lock-on button is engaged.

5.3 Rotation Direction

Use the rotation direction switch (Figure 4) to select forward or reverse rotation. Forward rotation is for drilling and hammer drilling. Reverse rotation is primarily for unscrewing or freeing jammed drill bits. Change the rotation direction only when the tool is switched off.

6. Засвар үйлчилгээ

Regular maintenance ensures the longevity and optimal performance of your rotary hammer.

• Цэвэрлэгээ: Keep the ventilation slots clean to prevent overheating. Wipe the tool housing with a soft, damp даавуу. Хатуу цэвэрлэгээний бодис, уусгагчийг бүү ашигла.
• Чак засвар үйлчилгээ: Regularly clean the SDS Plus chuck and apply a small amount of special grease to the bit shanks to ensure smooth operation and prevent wear.
• Утасны үзлэг: Periodically inspect the power cord for any damage. If damaged, have it replaced by a qualified technician.
• Хадгалах: Store the tool in its original case in a dry, secure place, out of reach of children.

7. Алдаа засах

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацааны мэдээлэл

Einhell products are manufactured to high-quality standards and are subject to strict quality controls. This product is covered by the manufacturer's warranty in accordance with the country-specific legal provisions. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell webсайт.

10. Дэмжлэг

Should you have any questions regarding the operation, maintenance, or troubleshooting of your Einhell TC-RH 800 E Rotary Hammer, please contact Einhell customer service or visit our official webнэмэлт тусламж, нөөцийн сайт.

Албан ёсны Webсайт: www.einhell.com