PROEL WD12A 12 инчийн 350W Идэвхтэй коаксиаль Stage Шаантаг шалны монитор хэрэглэгчийн гарын авлага

1. Танилцуулга

Thank you for choosing the PROEL WD12A Active Coaxial Stage Wedge Floor Monitor. This manual provides essential information for the safe and efficient use of your new audio equipment. The WD12A is designed to deliver clear sound intelligibility and high sound pressure levels in a lightweight, portable enclosure, making it suitable for professional musicians, rental companies, and amateur users.

Key features include a 12-inch coaxial transducer, a 350W Class D + 50W Class AB amplifier with SMPS, and two optimized EQ presets for either stage monitoring (MONITOR) or main sound system (FOH) applications. Its low-profile design and robust construction ensure reliable performance on any stage.

2. Бүтээгдэхүүн дууссанview

Familiarize yourself with the components and connections of your PROEL WD12A monitor.

Зураг 2.1: Урд View of PROEL WD12A Monitor. This image displays the front of the PROEL WD12A active coaxial stage wedge floor monitor, highlighting its protective metal grille and the PROEL logo. The wedge shape is evident, designed for optimal sound projection when placed on a stage floor.

Figure 2.2: Rear Panel of PROEL WD12A Monitor. This image shows the recessed connection panel located at the rear of the PROEL WD12A monitor. Visible components include input/output connectors, power input, and control knobs for level adjustment and EQ preset selection. The model number WD12A is also clearly displayed.

Зураг 2.3: Дээд тал View of PROEL WD12A Monitor. This image presents a top-down view of the PROEL WD12A monitor, emphasizing its compact and low-profile design. The robust metal grille covering the speaker components is visible, along with the overall construction of the cabinet.

3. Тохиргоо

3.1 Савлах

• Мониторыг савлагаанаас нь болгоомжтой авч хаяна уу.
• Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately.
• Ирээдүйд тээвэрлэх эсвэл хадгалахын тулд анхны сав баглаа боодлыг хадгална уу.

3.2 Байршил

The WD12A is designed primarily as a stage wedge monitor but can also function as a main sound system (FOH) speaker. Consider the following for optimal placement:

• Stage Монитор: Place the unit directly on the stage floor, angled towards the performer. Its low-profile design minimizes visual obstruction.
• Main Sound System (FOH): Utilize the integrated pole adapter to mount the speaker on a standard speaker pole for elevated sound projection. Ensure the pole and stand are stable and rated for the monitor's weight (approximately 11 kg / 24.25 lb).
• Хэт халалтаас урьдчилан сэргийлэхийн тулд төхөөрөмжийн эргэн тойронд хангалттай агааржуулалтыг хангана.

3.3 холболт

Before making any connections, ensure the monitor's power switch is in the OFF position and the main power cable is disconnected from the electrical outlet.

• Аудио оролт: Connect your audio source (e.g., mixer, instrument pre-amp) to the LINE IN connector on the rear panel using a balanced XLR cable.
• Аудио гаралт (Холбоос): If connecting multiple monitors or sending the signal to another device, use the LINE OUT connector.
• Эрчим хүчний холболт: Connect the supplied AC power cord to the POWER INPUT on the rear panel, then plug the other end into a grounded electrical outlet.

4. Ашиглалтын заавар

4.1 Асаах/унтраах

• Асаах: After all connections are made, set the LEVEL control to its minimum position. Connect the power cable to the outlet, then switch the POWER switch to the ON position.
• Унтраах: Before disconnecting power, set the LEVEL control to its minimum position, then switch the POWER switch to the OFF position. Disconnect the power cable from the outlet.

4.2 Оролтын түвшний тохируулга

Use the LEVEL control knob on the rear panel to adjust the overall volume of the monitor. Start with a low level and gradually increase it to the desired listening volume. Monitor the LIMITER indicator; if it illuminates frequently or stays on, reduce the input level from your source or the monitor's LEVEL control to prevent distortion and protect the speaker.

4.3 EQ урьдчилсан тохиргоо

The WD12A features two optimized EQ presets to adapt its sound profile to different applications:

• ХЯНАЛТ: This preset is optimized for stage monitoring, providing enhanced vocal clarity and feedback resistance.
• FOH (Front-Of-House): This preset is tailored for use as a main sound system speaker, offering a flatter frequency response suitable for general audience listening.

Select the appropriate preset using the switch on the rear panel based on your application.

5. Засвар үйлчилгээ

5.1 Цэвэрлэгээ

• Цэвэрлэхийн өмнө төхөөрөмжийг цахилгаанаас салга.
• Use a soft, dry cloth to wipe down the cabinet.
• Зөрүүд шороонд бага зэрэг damp Зөөлөн савантай даавуу хэрэглэж болно, дараа нь хуурай даавуугаар арчина.
• Зүлгүүрийн цэвэрлэгч, уусгагч эсвэл лав бүү хэрэглэ, учир нь эдгээр нь өнгөлгөөг гэмтээж болзошгүй.
• Keep liquids away from the control panel and speaker grille.

5.2 Хадгалалт

When not in use for extended periods, store the monitor in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging or a protective cover to prevent dust accumulation and physical damage.

6. Алдаа засах

If you encounter issues with your PROEL WD12A monitor, refer to the following table for common problems and solutions:

If the problem persists after attempting these solutions, please contact PROEL customer support or your authorized dealer.

7. Техникийн үзүүлэлтүүд

Technical specifications for the PROEL WD12A Active Coaxial Stage Wedge Floor Monitor:

8. Баталгаат хугацаа ба дэмжлэг

For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official PROEL website. You may also contact your authorized PROEL dealer for assistance.