Танилцуулга
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
Аюулгүй байдлын мэдээлэл
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
Багцын агуулга
Суулгацыг эхлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу.
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- Түгжээний механизм
- Strike plate (ASA Strike)
- Суурилуулах эрэг
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
Тохиргоо ба суурилуулалт
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. Хаалганы бэлтгэл
Ensure your door is prepared with the following standard dimensions:
- Хөндлөн нүх: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- Нуруу: 2-3/4 инч (70 мм)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- Түгжээг өгөгдсөн эрэг ашиглан бэхлээрэй.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. Install Strike Plate
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- Secure the strike plate with the provided screws.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
Ашиглалтын заавар
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
Жич: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны цоожны удаан эдэлгээ, жигд ажиллагааг баталгаажуулдаг.
- Цэвэрлэгээ: Гаднах гадаргууг зөөлөн, damp даавуу. Өнгөлгөөг гэмтээж болзошгүй зүлгүүрийн цэвэрлэгч эсвэл уусгагчаас зайлсхий.
- Тосолгоо: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- Шалгалт: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хөшүүрэг нь хөшүүн эсвэл эргүүлэхэд хэцүү байна. | Шороон хуримтлал эсвэл тосолгооны дутагдал. | Clean the mechanism and apply graphite lubricant. |
| Түгжээний боолт бүрэн татагдахгүй байна. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| Door rattles when closed. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
Үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Загварын дугаар | 129002 |
| Цуврал | 2500 цуврал |
| Түгжээний төрөл | Cylindrical Passage Lock (Non-locking) |
| Материал | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| Дуусга | Сатин Chrome |
| Хөшүүргийн хэв маяг | Withnell |
| Бэккет | 2-3/4 инч (70 мм) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| Гарын чиг баримжаа | Гар биш |
| Зэрэг | Grade 2 (Standard Duty Commercial) |
| Ажил хаялтын хавтан | ASA Strike |
| Оруулсан бүрэлдэхүүн хэсгүүд | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
Баталгаат хугацааны мэдээлэл
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
Хэрэглэгчийн дэмжлэг
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Webсайт: Visit the official Hager webтусламжийн эх сурвалж, холбоо барих мэдээллийн сайт.
- Холбоо барих: Refer to the packaging or Hager's website for phone numbers or email addresses.
Дэмжлэг үзүүлэх үйлчилгээтэй холбогдохдоо загварын дугаар (129002) болон худалдан авалтын дэлгэрэнгүй мэдээллийг бэлэн байлгана уу.