COTEK SD3500-112 GFCI

COTEK SD3500-112 GFCI Pure Sine Wave Inverter User Manual

Model: SD3500-112 GFCI

1. Танилцуулга

This manual provides essential information for the safe and efficient operation of your COTEK SD3500-112 GFCI Pure Sine Wave Inverter. The SD3500 series offers advanced features such as parallel connectivity, an integrated AC circuit breaker, and an automatic transfer switch (ATS) for a reliable and secure power supply. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage to the unit or connected devices.

2. Аюулгүй байдлын мэдээлэл

Цахилгаан цочрол, гал түймэр, гэмтлийн эрсдэлийг бууруулахын тулд дараах аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг үргэлж дагаж мөрдөөрэй.

  • Цахилгааны аюулгүй байдал: Инвертерийг бүү нээasing. Дотор нь хэрэглэгчийн засвар үйлчилгээ хийх хэсэг байхгүй. Бүх үйлчилгээг мэргэшсэн боловсон хүчинд шилжүүлээрэй.
  • Агааржуулалт: Инвертерийн эргэн тойронд хангалттай агааржуулалт байгаа эсэхийг шалгаарай. Агааржуулалтын нүхийг бүү бөглөөрэй.
  • Байгаль орчин: Install the inverter in a dry, cool, and well-ventilated area, away from flammable materials, corrosive chemicals, and direct sunlight.
  • Зайны холболт: Connect the inverter directly to a 12V DC battery bank using appropriate gauge cables. Ensure correct polarity (+ to + and - to -). Reverse polarity will damage the inverter.
  • Газардуулга: Properly ground the inverter chassis to a reliable earth ground.
  • Ачааллын хүчин чадал: Do not exceed the inverter's rated output power (3500W continuous). Overloading can cause damage and fire hazards.
  • GFCI хамгаалалт: The integrated GFCI outlets provide protection against ground faults. Test the GFCI regularly as per local electrical codes.

3. Бүтээгдэхүүний онцлог

The COTEK SD3500-112 GFCI Inverter is designed with advanced functionalities for robust performance:

  • Цэвэр синус долгионы гаралт: Provides clean and stable AC power suitable for sensitive electronics.
  • Parallel Redundancy Design: Allows for power expansion and enhanced reliability by connecting multiple inverters.
  • Automatic Master Mechanism: Optimizes reliability and eliminates single points of failure in multi-inverter setups.
  • Built-in Automatic Transfer Switch (ATS): Seamlessly switches between grid power and battery power for uninterrupted supply.
  • Integrated AC Circuit Breaker: Provides protection for the AC output.
  • Remote Control & Monitoring: Supports optional remote control (CR-10) and internet connectivity via built-in Ethernet for control from anywhere.
  • Selectable Output Voltage/Power Saving Mode: Configurable via DIP switches or remote control.
  • Цогц хамгаалалтууд: Includes reverse polarity (fuse), under/over voltage, short circuit, overload, over temperature, and over voltage хамгаалалт.
  • Өргөн DC оролт Voltage хүрээ: Accommodates various applications and extreme conditions.

4. Бүтээгдэхүүн дууссанview

Familiarize yourself with the components and connections of your SD3500-112 GFCI inverter.

COTEK SD3500-112 GFCI Pure Sine Wave Inverter, top-front view

Зураг 4.1: Дээд талын урд view of the COTEK SD3500-112 GFCI Inverter, showing the main casing and output receptacles.

Rear panel of COTEK SD3500-112 GFCI Inverter with connections

Figure 4.2: Rear panel of the inverter, detailing the DC input terminals, AC input/output, GFCI outlets, RS-232 remote port, and circuit breaker.

Cooling fans on the side of COTEK SD3500-112 GFCI Inverter

Зураг 4.3: Хажуу тал view showing the cooling fans, essential for maintaining optimal operating temperature.

5. Тохиргоо ба суурилуулалт

Proper installation is crucial for the inverter's performance and safety.

  1. Суурилуулалт: Choose a secure, dry, and well-ventilated location. Ensure sufficient clearance for airflow around the inverter, especially near the cooling fans.
  2. DC оролтын холболт:
    • Connect the positive (+) terminal of the 12V battery bank to the positive (+) DC input terminal on the inverter.
    • Connect the negative (-) terminal of the 12V battery bank to the negative (-) DC input terminal on the inverter.
    • Use appropriately sized cables to minimize voltage drop and ensure safe operation. Refer to electrical guidelines for cable sizing based on current and distance.
    • Бүх холболтууд нягт, найдвартай байгаа эсэхийг шалгаарай.
  3. Газардуулга: Connect the inverter chassis to a reliable earth ground using a suitable grounding wire.
  4. AC гаралтын холболт:
    • Plug your AC appliances directly into the GFCI outlets on the inverter.
    • For hardwired applications, consult a qualified electrician to connect to the AC output terminals.
  5. AC Input Connection (for ATS function): If using the automatic transfer switch, connect a reliable AC power source (e.g., shore power, generator) to the AC input terminals.
  6. Алсын удирдлага (заавал биш): If using a remote control unit (e.g., CR-10), connect it to the designated RS-232 port.

Чухал: Always ensure the inverter is OFF before making any connections.

6. Үйл ажиллагаа

Follow these steps to operate your COTEK SD3500-112 GFCI inverter:

  1. Асаах: Ensure all DC and AC connections are secure. Switch the inverter's main power switch to the "ON" position.
  2. Статусын үзүүлэлтүүд: Observe the LED indicators on the inverter (if present) for status such as power, fault, or overload. Refer to the full manual for detailed indicator meanings.
  3. Холболтын ачаалал: Plug your AC appliances into the GFCI outlets. Ensure the total wattagхолбогдсон цахилгаан хэрэгслийн e нь 3500Вт-аас хэтрэхгүй.
  4. GFCI тест: Periodically press the "TEST" button on the GFCI outlets to ensure they are functioning correctly. Press "RESET" after testing.
  5. Цэнэг хадгалах горим: If configured, the inverter may enter a power-saving mode when no load or a very light load is detected, reducing quiescent current draw.
  6. Automatic Transfer Switch (ATS): If an AC input source is connected, the inverter will automatically switch to that source when available, prioritizing it over battery power. When the AC input is lost, it will switch back to inverter (battery) power.
  7. Унтраах: Disconnect all AC loads, then switch the inverter's main power switch to the "OFF" position.

7. Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь таны инвертерийн урт наслалт, найдвартай ажиллагааг баталгаажуулдаг.

  • Цэвэрлэгээ: Инвертерийг цэвэр, тоос шороо, хог хаягдалгүй байлга. Гаднах хэсгийг хуурай даавуугаар арчих. Шингэн цэвэрлэгч хэрэглэж болохгүй.
  • Агааржуулалт: Ensure cooling vents are clear and unobstructed. Periodically check for dust buildup in the fan areas.
  • Холболтууд: Periodically check all DC and AC connections for tightness. Loose connections can cause overheating and poor performance.
  • Батерейны эрүүл мэнд: Monitor the health of your battery bank. A weak battery can affect inverter performance.
  • GFCI тест: Test the GFCI outlets monthly to ensure proper function.

8. Алдаа засах

Энэ хэсэгт таны инвертертэй холбоотой нийтлэг асуудлуудыг авч үзнэ.

АсуудалБоломжит шалтгаанШийдэл
Хувьсах гүйдлийн гаралт байхгүйИнвертер УНТРААЛТТАЙ, батерейны түвшин бага байнаtage, overload, internal fault, tripped AC breaker.Ensure inverter is ON. Check battery voltage. Reduce load. Reset AC breaker. If fault persists, contact support.
Overload alarm/shutdownХолбогдсон ачаалал нь инвертерийн тасралтгүй эсвэл хэт хүчдэлийн үнэлгээнээс давсан байна.Disconnect some appliances. Restart inverter. Ensure total load is within specifications.
Low battery alarm/shutdownБатерейны эзлэхүүнtage хэтэрхий бага байна.Recharge batteries. Check battery connections and health.
Инвертерийн хэт халалтPoor ventilation, excessive ambient temperature, prolonged high load.Ensure clear airflow around vents. Reduce ambient temperature. Reduce load.
GFCI байнга аялдагGround fault in connected appliance or wiring.Disconnect appliances one by one to identify the faulty device. Inspect wiring for damage.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact COTEK customer support.

9. Техникийн үзүүлэлтүүд

Technical specifications for the COTEK SD3500-112 GFCI Pure Sine Wave Inverter.

ОнцлогДэлгэрэнгүй
БрэндCOTEK
Загварын нэрSD Series (SD3500-112 GFCI)
Оролтын хэмжээtage12 вольт DC
Гаралтын ботьtage120 вольт хувьсах гүйдэл
Тасралтгүй гаралтын хүч3500 ватт
Хүч чадал6000 ВА
Гаралтын долгионы хэлбэрЦэвэр синусын давалгаа
Гаралтын давтамж60 Гц
Peak Efficiency at Full Load90%
Ашиглалтын хэвийн температурын хүрээ-20°C - 60°C (-4°F - 140°F)
Хадгалах температурын хүрээ-40°C - 70°C (-40°F - 158°F)
Зүйлийн жин26.5 фунт
Хэмжээ11.14" x 5.04" x 19.53"
Зөвлөмж болгож буй хэрэглээТээврийн хэрэгсэл
Эрчим хүчний эх үүсвэрБатерейгаар ажилладаг

10. Баталгаат хугацаа ба дэмжлэг

The COTEK SD3500-112 GFCI Pure Sine Wave Inverter comes with a 2 жилийн үйлдвэрлэгчийн баталгаа.

For technical assistance, warranty claims, or further information, please contact COTEK customer support through their official website or authorized distributors. Please have your model number (SD3500-112 GFCI) and purchase details ready when contacting support.

© 2023 COTEK. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.