1. Танилцуулга
The Panasonic Smart Home Human Motion Sensor KX-HJS200-W is a component of the Panasonic Smart Home System, designed to enhance home security and monitoring. This sensor detects movement by identifying changes in infrared radiation emitted by objects with temperature, such as people or animals. When motion is detected, the sensor can send notifications to your smartphone via the dedicated 'Home Network' application, provided it is connected to a home unit and your wireless LAN environment.
This manual provides essential information for the proper setup, operation, and maintenance of your KX-HJS200-W Human Motion Sensor.
Зураг 1: Урд view of the Panasonic KX-HJS200-W Human Motion Sensor, showing the motion detection lens and indicator light.
2. Багцын агуулга
Суулгацыг үргэлжлүүлэхийн өмнө багцад бүх зүйл байгаа эсэхийг шалгаарай.
- Panasonic KX-HJS200-W Human Motion Sensor
- Хананд суурилуулах адаптер
- AAA Alkaline Batteries (x2)
- Mounting Screws (4mm x 25mm) (x2)
Figure 2: Package contents including the human motion sensor, wall mount adapter, batteries, and screws.
3. Тохиргоо
3.1 Системийн шаардлага
- A Panasonic Smart Home System Home Unit (sold separately) connected to your home's wireless LAN.
- A smartphone or tablet running Android™ 5.0 or later (supporting Google Play™) or iOS 9.0 or later (iPhone, iPad).
- The dedicated 'Home Network' application installed on your smartphone/tablet (available on Google Play and App Store).
- A Wi-Fi environment.
- An internet connection environment with a global IP address [IPv4].
- A wireless router supporting UPnP function [2.4 GHz] frequency band.
3.2 Батерей суурилуулах
- Remove the back cover of the sensor.
- Insert two AAA alkaline batteries, ensuring correct polarity.
- Арын тагийг найдвартай солино.
Figure 3: Battery compartment with two AAA batteries installed.
3.3 Pairing with Home Unit
Follow the instructions provided with your Panasonic Smart Home System Home Unit and the 'Home Network' application to pair the KX-HJS200-W sensor. Up to 50 sensors (including door/window sensors) can be registered to a single home unit.
3.4 Мэдрэгчийг суурилуулах
The sensor can be wall-mounted using the included wall mount adapter and screws. Choose a location where the sensor has an unobstructed view of the area you wish to monitor. Avoid direct sunlight or heat sources that may cause false detections.
4. Мэдрэгчийг ажиллуулах
4.1 Мэдрэмжийн тохируулга
The sensor features a sensitivity switch on its side, allowing you to adjust its detection range. Set it to 'High Sensitivity' for broader detection or 'Low Sensitivity' to reduce false alarms in busy areas.
Зураг 4: Хажуу тал view of the sensor with the sensitivity switch labeled "High Sensitivity" and "Low Sensitivity".
4.2 Мэдэгдэл хүлээн авах
Once paired and configured through the 'Home Network' app, the sensor will send notifications to your smartphone when motion is detected. Notifications can be configured to activate during 'Home' or 'Away' security modes. When connecting from outside your home, standard smartphone data charges may apply.
The system can also be configured to record approximately 30 seconds of video from a connected camera when the motion sensor is triggered.
Зураг 5: Жишээ ньamples of sensor applications, including monitoring for intruders, store visitors, and family members.
5. Засвар үйлчилгээ
5.1 Цэвэрлэгээ
Wipe the sensor's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or strong detergents, as these can damage the device.
5.2 Батерейг солих
When the battery level is low, the sensor will indicate this, and the 'Home Network' app will notify you. Replace both AAA alkaline batteries promptly to ensure continuous operation. Refer to section 3.2 for battery installation instructions.
6. Алдаа засах
- Мэдэгдэл байхгүй:
- Check if the sensor is properly paired with the home unit.
- Ensure the 'Home Network' app is installed and configured correctly on your smartphone.
- Ухаалаг гар утсан дээрээ идэвхтэй интернет холболт байгаа эсэхийг шалгаарай.
- Мэдрэгчийн батерейны түвшинг шалгана уу.
- Confirm that the security mode (Home/Away) is set to allow notifications.
- Хуурамч илрүүлэлт:
- Adjust the sensitivity switch to 'Low Sensitivity'.
- Relocate the sensor away from direct sunlight, heating vents, or areas with frequent temperature fluctuations.
- Ensure the sensor is not pointing at moving objects like curtains or pets.
- Sensor Not Detecting Movement:
- Мэдрэгчийн батерейны түвшинг шалгана уу.
- Ensure the sensor's view саад болохгүй.
- Adjust the sensitivity switch to 'High Sensitivity'.
- Verify the sensor is within range of the home unit.
- Апп холболтын асуудал:
- Ensure your home unit is connected to the internet via a 2.4 GHz wireless router with UPnP enabled and a global IPv4 address.
- Check for updates to your smartphone's OS and the 'Home Network' application.
7. Техникийн үзүүлэлтүүд
| Брэнд | Panasonic |
| Загварын дугаар | KX-HJS200-W |
| Өнгө | Цагаан |
| Эрчим хүчний эх үүсвэр | Батерейгаар ажилладаг |
| Зайны төрөл | AAA Alkaline (x2) |
| Зүйлийн жин | 0.07 kg (approx. 70g without batteries) |
| Хэмжээ (D x W x H) | 3.9 x 7.3 x 7.2 см |
| Суурилуулах төрөл | Ханын бэхэлгээ |
8. Баталгаат хугацаа ба дэмжлэг
For product repair inquiries or technical support, please contact the Panasonic Repair Consultation Desk:
- Утас: 0120-878-554
- Хүлээн авах цаг: 9:00 - 19:00 (Daily)
- Special Hours: 9:00 - 17:30 (Sundays, Public Holidays, Year-end/New Year holidays)
- Онлайн: хайх "Panasonic Repair" on the internet.
For frequently asked questions and additional information regarding the Smart Home System, please visit the Panasonic FAQ page:
