M-Wave MWAVE CVC1012 Computer 14 F M14W

1. Танилцуулга

The M-Wave M14W is a wired bicycle computer designed to provide essential cycling data. It features 14 functions to help you track your rides effectively. Please read this manual carefully before installation and use to ensure proper function and longevity of your device.

Зураг 1: Урд view of the M-Wave M14W bicycle computer, showing the display with current speed (37.0 KM/hr) and distance (2.625).

2. Багцын агуулга

Суулгалтыг үргэлжлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд багцад байгаа эсэхийг шалгаарай:

• M-Wave M14W Bicycle Computer Unit
• Wired Sensor and Cable
• Хаалт суурилуулах
• Дугуйн соронз
• Cable Ties for securing
• CR2 батерей (урьдчилан суулгасан эсвэл тусад нь оруулсан)
• Хэрэглэх заавар (энэ баримт бичиг)

Figure 2: The M-Wave M14W bicycle computer shown in its retail packaging, indicating wireless functionality and 14 functions.

3. Тохиргоо ба суурилуулалт

3.1 Батерей суурилуулах

The M-Wave M14W uses a CR2 battery. The battery may be pre-installed. If not, or if you need to replace it:

1. Locate the battery compartment on the back of the computer unit.
2. Батерейны тагийг цагийн зүүний эсрэг эргүүлж нээгээд жижиг зоос эсвэл халив ашиглана уу.
3. CR2 батерейг эерэг (+) талыг дээш харуулан оруулна.
4. Батерейны тагийг буцааж тавиад, цагийн зүүний дагуу эргүүлж бэхлээрэй.

Зураг 3: Ар талд view of the M-Wave M14W unit, showing the battery compartment and reset button.

3.2 Mounting the Computer and Sensor

Follow these steps to securely mount the computer and its wired sensor:

1. Холбох хаалт: Attach the mounting bracket to your handlebar or stem using the provided straps or cable ties. Ensure it is firmly secured and positioned for easy viewing.
2. Мэдрэгчийн байршил: Mount the wired sensor to the front fork of your bicycle, ensuring it is aligned with the wheel magnet. The sensor should be positioned so that the magnet passes within 5mm of the sensor as the wheel rotates.
3. Соронзон суурилуулалт: Attach the magnet to a spoke on your front wheel. Adjust its position so it aligns with the sensor.
4. Кабелийн чиглүүлэлт: Route the sensor cable along the fork and frame, securing it with cable ties to prevent it from interfering with moving parts or getting snagged. Plug the cable into the computer unit's port.
5. Computer Attachment: Slide the M14W computer unit onto the mounting bracket until it clicks into place.

3.3 Анхны тохиргоо

After installation, you will need to configure the basic settings:

1. Нэгжийн сонголт: дээр дарна уу MODE button to cycle through settings. When prompted, select your preferred unit of speed (KM/hr or MPH) using the SET button. Confirm with MODE.
2. Дугуйны тойрог: This is crucial for accurate speed and distance readings.
   • Refer to your bicycle tire's sidewall for its size (e.g., 700x23C, 26x1.95).
   • Consult a wheel circumference chart (available online or in bicycle shops) to find the corresponding value in millimeters (mm).
   • Enter this value into the computer using the SET button to adjust digits and MODE дараагийн орон руу шилжих.
3. Initial Odometer Setting (Optional): Some models allow setting an initial odometer value. Follow on-screen prompts if this option appears.

4. Ашиглалтын заавар

The M14W features two primary buttons: SET болон MODE.

• MODE товчлуур: Used to cycle through different display functions (e.g., Speed, Distance, Ride Time, Odometer). In setting mode, it confirms selections or moves to the next setting.
• SET товчлуур: Used to adjust values during setup (e.g., wheel circumference, time). In some modes, it may reset specific trip data.

4.1 Display Functions (14 Functions)

дээр дарна уу MODE товчийг дарна уу view дараах функцууд:

4.2 Resetting Trip Data

To reset trip-specific data (Trip Distance, Average Speed, Maximum Speed, Ride Time), typically you will press and hold the SET button for a few seconds while in the relevant display mode. Refer to the on-screen prompts for confirmation.

5. Засвар үйлчилгээ

5.1 Цэвэрлэгээ

Clean the computer unit and sensor regularly with a soft, damp даавуу. Зүлгүүрийн цэвэрлэгч эсвэл уусгагч хэрэглэж болохгүй, учир нь эдгээр нь дэлгэц эсвэл дэлгэцийг гэмтээж болзошгүй.asing. The unit has an IP44 rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. Avoid submerging the unit in water.

5.2 Батерейг солих

When the display becomes dim or erratic, it's time to replace the CR2 battery. Follow the steps outlined in Section 3.1. Dispose of old batteries responsibly according to local regulations.

5.3 Хадгалалт

If storing the bicycle computer for an extended period, it is recommended to remove the battery to prevent leakage and potential damage to the unit.

6. Алдаа засах

If you encounter issues with your M-Wave M14W computer, try the following solutions:

7. Техникийн үзүүлэлтүүд

8. Баталгаат хугацаа ба дэмжлэг

M-Wave products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official M-Wave website. In case of technical issues or questions not covered in this manual, please contact M-Wave customer support through their official channels.

Figure 4: M-Wave brand logo, "Your World of Cycling".

For more information and product updates, you may visit the official M-Wave webсайт: www.m-wave-bike.com