BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light User Manual

Танилцуулга

This manual provides essential information for the safe and effective installation, operation, and maintenance of your BTF-LIGHTING 16.4ft Warm White SMD5630 LED Strip Light. Please read this manual thoroughly before use and retain it for future reference.

Аюулгүй байдлын мэдээлэл

Суулгах эсвэл засвар үйлчилгээ хийхээс өмнө цахилгаан тэжээлийг салгасан эсэхийг шалгаарай.
This LED strip is designed for 12V DC power only. Connecting to a higher voltage бүтээгдэхүүнийг гэмтээх болно.
This product is IP30 rated, meaning it is non-waterproof. Avoid exposure to water or high humidity.
Do not bend the LED strip sharply or apply excessive force, as this may damage the circuit board or LEDs.
Ensure proper ventilation around the LED strip to prevent overheating.
Хүүхдийн гар хүрэхгүй газар хадгална.
Only use the recommended power adapter (DC12V3A) or a compatible power supply.

Багцын агуулга

Бүх бүрэлдэхүүн хэсгүүд байгаа бөгөөд сайн нөхцөлд байгаа эсэхийг шалгана уу:

1 x BTF-LIGHTING 16.4ft (5m) Warm White SMD5630 LED Strip Light
1 x Remote Control (if included with your specific package)
Note: Power adapter is typically sold separately.

Үзүүлэлтүүд

Брэнд	BTF-ГЭРЭЛТҮҮЛЭГ
Загварын дугаар	56305MWW60W30
LED төрөл	SMD5630
LED тоо хэмжээ	300 LED (метр тутамд 60 LED)
Туузны урт	16.4 фут (5 метр)
FPCB Board Width	10 мм
Цайвар өнгө	Халуун цагаан
Өнгөний температур	2700К-3000К
LED тутамд люмен	23-25 lm/LED
Ажлын ботьtage	DC 12V
Санал болгож буй цахилгаан хувиргагч	DC 12V 3A (36W) or higher
Ватtage	30 ватт
Ус үл нэвтрэх түвшин	IP30 (Non-Waterproof)
Ашиглалтын температур	-20 хэмээс 50 хэм хүртэл
Амьдрах хугацаа	>50,000 цаг
Гэрчилгээ	CE & RoHS

Тохируулах заавар

Гадаргууг бэлтгэх: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can reduce the adhesive's effectiveness.
Зураг: Ойролцоогоор view of the LED strip, highlighting individual SMD5630 LEDs and designated cut points marked with a scissor icon. The strip also shows the adhesive backing being peeled.
Хэмжих ба зүсэх (заавал биш): If a shorter length is required, cut the LED strip only at the designated cut marks (usually indicated by a scissor icon and copper pads). Cutting elsewhere will damage the circuit and prevent the section from lighting up.
Эрчим хүчийг холбох:
- Identify the 2-pin connectors on the LED strip.
- Connect the LED strip's 2-pin connector to a compatible DC 12V power adapter (not included). Ensure polarity is correct (positive to positive, negative to negative).
- If a remote control is included, connect the LED strip to the remote controller, and then connect the controller to the power adapter.
Image: Two separate sections of the LED strip, each terminating with a 2-pin connector (red and black wires), ready for connection to a power source or controller.
Test Before Adhering: Before removing the adhesive backing, plug in the power adapter to test if the LED strip lights up correctly. This allows for troubleshooting before permanent installation.
Туузыг наах: Once tested, peel off the protective backing from the adhesive tape on the back of the LED strip. Carefully press the strip onto the desired clean, dry surface. Apply firm, even pressure along the entire length to ensure good adhesion.

Ашиглалтын заавар

Once the LED strip is properly installed and connected to a 12V DC power supply:

Асаах/унтраах: Plug the power adapter into a wall outlet to turn the strip light on. Unplug it to turn it off.
Using the Remote Control (if applicable): If your package included a remote control, refer to its specific instructions for functions such as brightness adjustment or on/off control.

Examples of warm white LED strip lighting in various indoor settings

Зураг: Visual examples of LED strip lighting used in different indoor environments, demonstrating the warm white illumination. This image also shows Cool White and Nature White, but this product is Warm White.

Засвар үйлчилгээ

Цэвэрлэгээ: Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
Шалгалт: Periodically check the strip for any signs of damage, loose connections, or adhesive degradation.
Хадгалах: If storing the LED strip, ensure it is kept in a dry, cool place, away from direct sunlight and extreme temperatures.

Алдааг олж засварлах

Асуудал	Боломжит шалтгаан	Шийдэл
LED зурвас асахгүй байна.	Адаптерт цахилгаан байхгүй. Incorrect power connection (polarity reversed). Цахилгаан адаптер буруу байна. Damaged LED strip. Remote control battery dead or not paired (if applicable).	Ханын залгуур болон цахилгаан адаптерийн холболтыг шалгана уу. Ensure positive (+) and negative (-) connections are correct. Test with a known working 12V DC power adapter. Inspect the strip for visible damage, especially at cut points. Replace remote battery or re-pair according to remote instructions.
Part of the LED strip is not lighting up.	Damage to a section of the strip. Incorrect cutting.	Inspect the unlit section for physical damage or a broken circuit. Ensure cuts were made only at designated marks. Damaged sections cannot be repaired.
LED гэрэл бүдэг эсвэл анивчдаг.	Цахилгаан хангамж хангалтгүй. Сул холболт.	Цахилгаан адаптер нь хангалттай ват өгч байгаа эсэхийг шалгаарайtage (minimum 30W for this strip). Бүх холболтыг найдвартай холбох эсэхийг шалгана уу.

Баталгаат болон дэмжлэг

BTF-LIGHTING products are designed for reliability and performance. For warranty information, technical support, or assistance with your product, please contact BTF-LIGHTING customer service through the retailer where the product was purchased or visit the official BTF-LIGHTING webсайт.

Please have your model number (56305MWW60W30) and purchase details ready when contacting support.

BTF-LIGHTING 56305MWW60W30