VIVOTEK AM-116

VIVOTEK AM-116 Pendant Pipe Instruction Manual

Загвар: AM-116

1. Бүтээгдэхүүн дууссанview

The VIVOTEK AM-116 is a 20cm white pendant pipe designed to provide an extended and secure mounting solution for compatible VIVOTEK surveillance cameras. This accessory facilitates optimal camera positioning for various surveillance applications.

VIVOTEK AM-116 Pendant Pipe

Image 1.1: VIVOTEK AM-116 Pendant Pipe. This image shows the white cylindrical pendant pipe, approximately 20cm in length, designed for camera mounting.

2. Багцын агуулга

Суулгацыг үргэлжлүүлэхийн өмнө багцад бүх зүйл байгаа эсэхийг шалгаарай.

  • VIVOTEK AM-116 Pendant Pipe (1 piece, 20cm, White)
  • Суурилуулах тоног төхөөрөмж (эрэг, ханын зангуу)
  • Суулгах гарын авлага (энэ баримт бичиг)

3. Аюулгүй байдлын мэдээлэл

Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in injury or damage to the product.

  • Мэргэжлийн суурилуулалтыг санал болгож байна: For optimal safety and performance, installation by a qualified professional is recommended.
  • Аюулгүй суурилуулалт: Ensure the mounting surface is capable of supporting the combined weight of the pendant pipe and the attached camera. Use appropriate mounting hardware for the specific surface material.
  • Зөв хэрэгслийг ашиглах: Always use the correct tools for installation to prevent damage to the product or injury.
  • Саад бэрхшээлээс зайлсхийх: Do not install the pendant pipe in a location where it might obstruct emergency exits or pathways.
  • Цахилгааны аюулгүй байдал: If connecting to a powered camera, ensure all electrical work is performed by a qualified electrician and complies with local electrical codes.

4. Тохиргоо

Follow these steps for proper installation of the VIVOTEK AM-116 Pendant Pipe.

4.1 Mounting the Pendant Pipe

  1. Суулгах байршлыг тодорхойлох: Select a suitable, stable surface (e.g., ceiling, wall) that can securely hold the weight of the pendant pipe and the camera.
  2. Өрөмдлөгийн нүхийг тэмдэглэх: Use the pendant pipe's mounting base as a template to mark the positions for drilling holes.
  3. Өрөмдлөгийн цооног: Drill pilot holes of the appropriate size for the provided mounting screws and wall anchors (if necessary for the surface material).
  4. Secure Pendant Pipe: Attach the pendant pipe securely to the mounting surface using the provided screws. Ensure it is firmly fixed and does not wobble.
  5. Attach Compatible Device: Connect your compatible VIVOTEK camera (e.g., AE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE) to the bottom of the pendant pipe according to the camera's specific installation instructions. Ensure all connections are tight and secure.

5. Ажиллаж байгаа

The VIVOTEK AM-116 Pendant Pipe is a passive mounting accessory. Once properly installed, its primary function is to provide a stable and extended platform for your compatible VIVOTEK surveillance camera. There are no active operational controls for the pendant pipe itself. The operation of the surveillance system will depend on the attached camera and its associated software.

6. Засвар үйлчилгээ

Regular maintenance helps ensure the longevity and reliability of your pendant pipe.

  • Харааны үзлэг: Periodically inspect the pendant pipe and its mounting points for any signs of damage, corrosion, or loosening.
  • Цэвэрлэгээ: If necessary, clean the exterior of the pendant pipe with a soft, damp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагч эсвэл хүчтэй химийн бодис бүү хэрэглэ, учир нь эдгээр нь өнгөлгөөг гэмтээж болзошгүй.
  • Бэхэлгээг чангалах: If any mounting screws appear loose, carefully re-tighten them to ensure the pipe remains securely fixed.

7. Алдаа засах

This section addresses common issues related to the VIVOTEK AM-116 Pendant Pipe.

АсуудалБоломжит шалтгаанШийдэл
Pendant pipe feels loose or wobbly after installation.Mounting screws are not sufficiently tightened, or the mounting surface is inadequate.Ensure all mounting screws are securely tightened. If the surface is weak, consider reinforcing it or choosing a different mounting location.
Camera cannot be attached to the pendant pipe.Incompatibility with the camera model or incorrect attachment method.Verify that your camera model is listed as compatible (e.g., AE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE). Refer to the camera's manual for specific attachment instructions.
Visible damage to the pendant pipe.Physical impact or environmental factors.If the pipe is damaged, replace it immediately to prevent potential failure and damage to the attached camera.

8. Техникийн үзүүлэлтүүд

Key technical specifications for the VIVOTEK AM-116 Pendant Pipe.

ОнцлогДэлгэрэнгүй
ЗагварAM-116
ҮйлдвэрлэгчVIVOTEK
ӨнгөЦагаан
Урт20 см (ойролцоогоор 7.87 инч)
Багцын хэмжээ10.98 x 2.72 x 2.6 инч
Зүйлийн жин1.06 фунт
ASINB01FRC2D2S
Дэмжигдсэн төхөөрөмжүүдAE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE

9. Баталгаат хугацааны мэдээлэл

The VIVOTEK AM-116 Pendant Pipe is covered by a standard manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official VIVOTEK webсайт эсвэл харилцагчийн үйлчилгээтэй шууд холбогдоно уу. Баталгаат нэхэмжлэл гаргахын тулд худалдан авалтаа нотлох баримтаа хадгалаарай.

10. Дэмжлэг

For technical assistance, product inquiries, or further support, please contact VIVOTEK customer service through their official channels:

  • Албан ёсны Webсайт: Visit the VIVOTEK official webТусламжийн эх сурвалж, түгээмэл асуултууд болон холбоо барих мэдээллийн сайт.
  • Харилцагчийн үйлчилгээ: Refer to the VIVOTEK website for regional contact numbers or email support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.