Lepro Industrial LED Desk Lamp

Танилцуулга

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Энэхүү олон талт lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Please read this manual thoroughly before installation and operation, and retain it for future reference.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Аюулгүй ажиллагааны зааварчилгаа

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Зөвхөн хамгийн их ваттын чадалтай E27 суурьтай чийдэнг ашиглаарайtage 40W.
• l-г бүү ашиглаamp гэмтсэн цахилгааны утас эсвэл залгууртай.
• Энэ бүтээгдэхүүн нь зөвхөн дотор ашиглах зориулалттай. Ус эсвэл өндөр чийгшилд бүү оруул.
• l-г хадгалamp шатамхай материалаас хол байх.
• l-ийг задлах, засах гэж бүү оролдamp өөрөө. Үйлчилгээ авахын тулд мэргэшсэн ажилтантай холбогдоно уу.

Багцын агуулга

Дараах зүйлсийн багцад байгаа эсэхийг шалгана уу.

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Хэрэглэгчийн гарын авлага

Тэмдэглэл: E27 чийдэнг багтаагүй бөгөөд тусад нь худалдаж авах шаардлагатай.

Тохиргоо ба суурилуулалт

Follow these steps to assemble and install your desk lamp:

1. Cl-г хавсаргана ууamp: cl-ийг найдвартай бэхлээрэйamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. L-г угсарнаamp Толгой: l-г суулгана ууamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Insert the Arm: l-г болгоомжтой оруулна ууamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Булцууг суурилуулах: l-г баталгаажуулна ууamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp залгуур. Хэт чангалж болохгүй.
5. Цахилгаанд холбогдох: l-г залгаарайamp's power cord into a suitable electrical outlet.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Зураг: Lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Ашиглалтын заавар

Асаах/унтраах: Locate the rocker switch on the power cord. Press the switch to turn the lamp асаах эсвэл унтраах.

Гэрлийн өнцгийг тохируулах: Лamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Зураг: Lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Засвар үйлчилгээ

Цэвэрлэгээ: л цэвэрлэхийн тулдamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Булцуу солих: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp буцаж орох.

Алдааг олж засварлах

• Lamp асахгүй:
  • Цахилгааны утсыг залгуурт найдвартай залгасан эсэхийг шалгана уу.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Өөр төхөөрөмжийг залгах замаар цахилгааны залгуурыг шалгана уу.
• Гэрэл анивчиж байна:
  • Чийдэнг сайтар шургуулсан эсэхийг шалгаарай.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp тогтворгүй байна:
  • cl-ийг баталгаажуулна ууamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • l гэдгийг шалгана ууamp arm is properly inserted into the clamp хамтарсан.

Үзүүлэлтүүд

Image: Product dimensions and key features like E27 bulb base and power cord length.

Баталгаат болон дэмжлэг

Баталгаат хугацаа: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Хэрэглэгчийн дэмжлэг: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.