SONICAKE RockStage Multi-Effects Guitar Pedal Instruction Manual

1. Танилцуулга

Худалдан авалт хийсэнд баярлалааasing the SONICAKE RockStage Multi-Effects Guitar Pedal. This device is designed to provide essential guitar effects in a compact and user-friendly format, ideal for classic rock musicians. It integrates Distortion, Chorus, Delay, and Reverb effects, along with a built-in cabinet simulator for versatile sound routing.

2. Үндсэн шинж чанарууд

One-stop gig solution for classic rock players with all necessary core effects.
Analog Plexi-style distortion for 80s/90s hard rock tones.
Analog BBD-style chorus for warm, dreamy soundscapes.
500ms analog voice delay and high-quality reverb for expansive, spacy tones.
Integrated cabinet simulation for direct connection to PA systems, mixers, or audio interfaces.

3. Хайрцагт юу байна

SONICAKE RockStage Multi-Effects Guitar Pedal (QCE-10)
XLR кабель
Цахилгаан хувиргагч (9V DC)
Хэрэглэгчийн гарын авлага

4. Тохируулах заавар

4.1 Эрчим хүчний холболт

Connect the provided 9V DC power adapter to the 'DC 9V' input jack on the pedal. Ensure the power source meets the pedal's requirements (9V DC, 20mA minimum) to prevent damage.

4.2 Аудио холболт

Гитарын оролт: Connect your guitar to the 'IN' jack on the right side of the pedal using a standard 1/4-inch instrument cable.
Гаралт руу Ampөргөгч/PA: Connect the 'OUT' jack on the left side of the pedal to your guitar amplifier's input or a PA system/mixer using a standard 1/4-inch instrument cable or the provided XLR cable if using the cabinet simulation.
Чихэвчний гаралт: Чимээгүй дасгал хийхийн тулд чихэвчээ 'PHONES' залгуурт холбоно уу.

SONICAKE RockStage pedal with input and output jacks — Зураг 1: Илүүview of the SONICAKE RockStage pedal, showing input, output, and power connections.

SONICAKE RockStage pedal connected to guitar and ampнастан — Figure 2: The RockStage pedal connected to a guitar and an amplifier, illustrating typical setup.

5. Ашиглалтын заавар

The RockStage pedal features four main effects: Chorus, Rock Amp (Distortion), Delay, and Reverb. Each effect has dedicated footswitches and control knobs.

5.1 Үр нөлөөний модулиуд

SONICAKE RockStage pedal showing four effects: Chorus, Rock Amp, Delay, Reverb — Figure 3: The four main effects modules of the RockStage pedal: Chorus, Rock Amp, Delay, and Reverb.

Найрал дуу: Controls for SPEED and DEPTH to adjust the modulation intensity and rate.
Рок Amp (Distortion): Controls for VOL (Volume), TONE, and GAIN to shape the distortion character and output level.
Саатал: Controls for BLEND (mix), REPEAT (feedback), and TIME to set the delay parameters.
Reverb: A single MIX knob to adjust the wet/dry balance of the reverb effect.

5.2 Activating/Deactivating Effects

Each effect module has a dedicated footswitch. Press the footswitch to toggle the corresponding effect on or off. The LED indicator above each footswitch will illuminate when the effect is active.

5.3 Cabinet Simulation

The RockStage pedal includes a built-in cabinet simulator. This feature allows you to connect the pedal directly to a PA system, mixer, or audio interface without needing a traditional guitar amplifier. The 'CABINET SIM' switch (OFF/ON) is located between the Reverb and Delay modules.

SONICAKE RockStage pedal with Cabinet Sim switch highlighted — Figure 4: The Cabinet Sim switch, enabling direct connection to PA systems or audio interfaces.

5.4 LED Knobs

The control knobs for each effect feature LED backlighting, which clearly indicates the working status of the effect, especially useful in low-light stage орчин.

SONICAKE RockStage pedal showing illuminated LED knobs — Figure 5: Illuminated LED knobs provide clear visual feedback on effect status.

5.5 Зөөврийн чадвар

The compact size and lightweight design of the RockStage pedal make it highly portable and road-ready, fitting easily into gig bags or backpacks.

SONICAKE RockStage pedal fitting into a gig bag — Figure 6: The compact design allows for easy transport and setup.

6. Техникийн үзүүлэлтүүд

Онцлог	Дэлгэрэнгүй
Брэнд	СОНИКЕК
Загварын нэр	ЧУЛУУTAGE (QCE-10)
Хэмжээ	40L x 7l x 5.5H cm
Ботьtage	9 вольт
Ampарилгах	20 саяampээ
Аудио гаралтын эффектүүд	Overdrive, Distortion, Chorus, Reverb, Delay
Хяналтын төрөл	Button, Knob
Эрчим хүчний эх үүсвэр	Утастай цахилгаан
Тоног төхөөрөмжийн интерфейс	Multiple Audio
Дохионы формат	Аналог
Холбогч төрөл	3.5 мм Аудио Жак
Гарал үүслийн улс	Хятад

7. Засвар үйлчилгээ

Цэвэрлэгээ: Зөөлөн, хуурай даавуугаар дөрөөг цэвэрлэ. Зүлгүүрийн цэвэрлэгч эсвэл уусгагч хэрэглэхээс зайлсхий.
Хадгалах: Дөрөөг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
Харьцуулах: Дөрөө унагаах эсвэл хүчтэй цохилтод өртөхөөс зайлсхий.
Эрчим хүч: Always disconnect the power adapter when the pedal is not in use or during electrical storms.

8. Алдаа засах

Дуугүй:
- Бүх кабель найдвартай холбогдсон эсэхийг шалгаарай.
- Verify the power adapter is correctly plugged in and providing power.
- Check your guitar and amplifier volume settings.
- Холболтын алдааг арилгахын тулд өөр өөр кабелиар туршиж үзээрэй.
Хүсээгүй чимээ шуугиан:
- Ensure you are using the correct power adapter.
- Өөр цахилгаан залгуур ашиглаж үзнэ үү.
- Keep the pedal away from other electronic devices that may cause interference.
Идэвхгүй эффект:
- Press the footswitch firmly. The LED should illuminate.
- Check the knob settings for the specific effect; some effects may be subtle at low settings.

9. Баталгаат хугацаа ба дэмжлэг

The SONICAKE RockStage Multi-Effects Guitar Pedal comes with a Бүтээгдэхүүний 1 жилийн баталгаат хугацаа худалдан авсан өдрөөс.

For technical support, troubleshooting assistance, or warranty claims, please contact SONICAKE customer service. Refer to the contact information provided on the product packaging or the official SONICAKE webсайт.