1. Танилцуулга
The CONTEC CMS50NA Pulse Oximeter is a portable device designed for non-invasive spot-check measurement of oxygen saturation of arterial hemoglobin (SpO2) and pulse rate. It is intended for sports and aviation use only and is not a medical device. This manual provides essential information for the safe and effective operation of the device.
Чухал тэмдэглэл: This product is intended for sports and aviation use only. It is not a medical device and should not be used for diagnosis or treatment of any medical condition.
2. Юу багтсан
Багцыг нээхдээ бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу:
- CONTEC CMS50NA Pulse Oximeter (1 unit)
- Handy Carry Pouch (1 unit)
- 1.5V AAA Alkaline Batteries (2 units)
- Long Lanyard (Neck/Wrist Cord) (1 unit)
- Хэрэглэгчийн гарын авлага (1 нэгж)
Image: All items included in the CONTEC CMS50NA Pulse Oximeter package, including the oximeter, carry pouch, batteries, lanyard, and user manual.
3. Тохиргоо
3.1 Батерей суурилуулах
- Open the battery cover on the back of the device by sliding it downwards.
- Insert two 1.5V AAA alkaline batteries into the battery compartment, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
- Батерейны тагийг сайтар товших хүртэл нь буцааж байранд нь шургуулж хаа.
Image: The open battery compartment of the pulse oximeter, showing where to insert the two AAA batteries.
3.2 оосорыг бэхлэх
- Thread the thinner end of the lanyard through the lanyard loop hole located on the side of the oximeter.
- Pass the thicker end of the lanyard through the looped thinner end and pull gently to secure.
Image: A visual guide demonstrating the three steps to correctly attach the neck/wrist lanyard to the pulse oximeter.
4. Ашиглалтын заавар
4.1 Хэмжилт хийх
- Пульс оксиметрийн хавчаарыг нээ.
- Insert one of your fingers (preferably the index or middle finger) into the rubber opening of the oximeter, ensuring it is placed correctly.
- Press the power button on the top of the device.
- Keep your hand still and avoid shaking during the measurement process.
- The SpO2 and Pulse Rate values will appear on the display within a few seconds.
Image: A three-step visual guide showing how to open the clip, insert a finger, and press the power button to take a measurement.
4.2 Дэлгэцийг ойлгох
The bright TFT display shows the following information:
- SpO2: Blood Oxygen Saturation Level (displayed as a percentage).
- PRbpm: Pulse Rate (displayed in beats per minute).
- Pulse Rate Waveform: A graphical representation of your pulse.
- Пульсийн зураасны график: A vertical bar graph indicating pulse intensity.
- Зайны үзүүлэлт: Батерейны үлдсэн хугацааг харуулна.
Image: The pulse oximeter display showing SpO2 and PRbpm readings, along with the pulse waveform and bar graph.
4.3 Дэлгэцийн чиглэл
The device features a rotatable multi-directional display. The display orientation automatically adjusts based on how the device is held, ensuring easy readability from various angles.
Image: The pulse oximeter display shown in different orientations, demonstrating its rotatable feature for easy viewing.
4.4 Автомат унтраалт
The device will automatically power off after 5 seconds of inactivity or when the finger is removed from the sensor.
5. Засвар үйлчилгээ
5.1 Төхөөрөмжийг цэвэрлэх
- Оксиметрийн гадаргууг зөөлөн даавуугаар цэвэрлэнэ damp70% изопропилийн спирт агуулсан.
- Төхөөрөмжийг ус эсвэл бусад цэвэрлэгээний уусмалд дүрж болохгүй.
- Дахин ашиглахаасаа өмнө төхөөрөмжийг бүрэн хуурай байгаа эсэхийг шалгаарай.
5.2 Батерейг солих
Replace batteries when the low battery indicator appears on the display. Always use new 1.5V AAA alkaline batteries.
5.3 Хадгалалт
Store the pulse oximeter in its handy carry pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Алдаа засах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Асаах дараа дэлгэц байхгүй болно. | Батерей нь дуусчихсан эсвэл буруу суурилуулсан. | Replace batteries or re-install them correctly, ensuring polarity. |
| SpO2 and PR values are unstable. | Finger not inserted properly, patient movement, or cold hands. | Re-insert finger, remain still, or warm hands before measurement. Ensure no nail polish. |
| "Finger Out" message displayed. | Finger not detected or removed. | Ensure finger is fully inserted into the sensor. |
| Дэлгэц бүдэг байна. | Low battery or screen protective film still on. | Replace batteries. Remove the thin protective film from the screen. |
7. Техникийн үзүүлэлтүүд
- Загварын нэр: CMS50NA
- Бүтээгдэхүүний хэмжээ: 2.24 x 1.34 x 1.22 инч
- Жин: 3.21 унц (батерейтай)
- Эрчим хүчний шаардлага: 2 х 1.5V AAA шүлтлэг батерей
- Зайны хугацаа: Approximately 20-30 hours of continuous operation
- Дэлгэцийн төрөл: TFT дэлгэц
- SpO2 хэмжих хүрээ: 0% - 100%
- Пульс хэмжих хязгаар: 30 цохилт/мин - 250 цохилт/мин
- Автомат унтраалт: 5 секундын идэвхгүй байдлын дараа
- Үйлдвэрлэгч: Contec Medical Systems Co., Ltd.
8. Баталгаат хугацаа ба дэмжлэг
For warranty information and customer support, please refer to the official CONTEC webсайт эсвэл худалдагчтайгаа холбогдоно уу. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.
Хуулийн хариуцлага: This product is intended for sports and aviation use only. We are the direct manufacturer, there is a clear screen protector which can be removed before use.
Нэмэлт эх сурвалжуудын талаар та дараах хаягаар лавлаж болно Албан ёсны хэрэглэгчийн гарын авлага (PDF).
9. Бүтээгдэхүүний албан ёсны видеонууд
How to take measurements with CONTEC50NA pulse oximeter?
Video: An official demonstration by Contec Medical Systems Co., Ltd. showing the correct procedure for taking measurements with the CMS50NA pulse oximeter.