TSL Platinum Professional Level 8 Channel NVR – 4K User Manual

1. Танилцуулга

This manual provides instructions for the installation, operation, and maintenance of your TSL Platinum Professional Level 8 Channel NVR (Network Video Recorder), Model LTN8708Q P8. This NVR supports up to 8 channels of IP camera input, with resolutions up to 8 Megapixels, and utilizes H.265/H.265+/H.264/H.264 Zip+/MPEG4 video formats for efficient storage and high-quality video. Please read this manual thoroughly before operating the device to ensure proper use and to prevent damage.

Багцын агуулга

Доор жагсаасан бүх зүйл таны багцад байгаа эсэхийг шалгаарай. Хэрэв ямар нэг зүйл дутуу эсвэл гэмтсэн бол худалдагчтайгаа холбоо барина уу.

• TSL Platinum Professional Level 8 Channel NVR Unit
• Эрчим хүчний адаптер
• USB хулгана
• Алсын удирдлага
• SATA Cables (for hard drive connection)
• Mounting Screws (for hard drive)
• Түргэн эхлүүлэх гарын авлага

Зураг 1: NVR Package Contents. This image displays the power adapter, remote control, SATA data and power cables, and mounting screws that are typically included with the NVR unit.

2. Аюулгүй байдлын мэдээлэл

Төхөөрөмжийг гэмтээх, гэмтээхгүйн тулд дараах аюулгүй байдлын арга хэмжээг дагаж мөрдөнө үү.

• Эрчим хүчний хангамжийн хэмжээг баталгаажуулна ууtagNVR-г холбохоос өмнө e зөв байна.
• NVR-г ус эсвэл чийгэнд бүү оруул.
• NVR-г нарны шууд тусгал эсвэл дулааны эх үүсвэрийн ойролцоо байрлуулахаас зайлсхий.
• Install the NVR in a well-ventilated area to prevent overheating.
• NVR c-г бүү нээasing. Бүх үйлчилгээг мэргэшсэн боловсон хүчинд шилжүүлээрэй.
• Зөвхөн үйлдвэрлэгчийн заасан дагалдах хэрэгслийг ашигла.

3. Бүтээгдэхүүн дууссанview

NVR Front and Rear Panels

Зураг 2: NVR Front and Rear Panels. The top image shows the front panel with power, status, and Tx/Rx indicators, along with control buttons and a USB port. The bottom image displays the rear panel with PoE ports, audio in/out, LAN, HDMI, VGA, and power input.

Front Panel Indicators and Controls:

• ХҮЧ: Эрчим хүчний үзүүлэлт.
• БАЙДАЛ: Системийн төлөвийн үзүүлэлт.
• Эмийн эмчилгээ/Рексепт: Data transmission/reception indicator.
• Хяналтын товчлуурууд: For menu navigation and system control.
• USB порт: For mouse or USB storage device connection.

Rear Panel Interfaces:

• PoE Ports (8 channels): Connect IP cameras directly for power and data.
• АУДИО ОРОЛТ/ГАРЦ: Гадаад аудио төхөөрөмжүүдийн хувьд.
• LAN порт: Connect to your network router/switch.
• HDMI гаралт: Connect to a monitor for high-resolution video output (up to 4K).
• VGA гаралт: Connect to a monitor for video output (up to 1080p).
• Цахилгаан оролт (48V): Өгөгдсөн тэжээлийн адаптерийг холбоно уу.
• Эрчим хүч солих: To turn the NVR on/off.

Гол онцлогууд

• 8 channel PoE IP camera input, supporting cameras up to 8MP with a maximum incoming bandwidth of 80Mbps.
• H.265+ / H.265 / H.264+ / H.264 video formats for efficient compression.
• 2x SATA interfaces for hard drives (hard drives are not included).
• HDMI / VGA simultaneous output. HDMI output up to 4K@30Hz, VGA output up to 1080p@60Hz.
• Шуудаар дэмжээрэй view, storage, and playback of connected cameras.

4. Тохиргоо

4.1 Хатуу диск суурилуулах (заавал биш)

The NVR requires a hard drive for video recording. Hard drives are not included and must be purchased separately. The NVR supports up to two SATA hard drives.

1. NVR-ийн дээд тагийг тайлж ав.
2. Connect the SATA data cable and power cable to the hard drive and the corresponding ports on the NVR motherboard.
3. Өгөгдсөн боолтыг ашиглан хатуу дискийг NVR-ийн их биед бэхлэнэ үү.
4. Дээд талын тагийг сольж, боолтоор бэхлэнэ.

4.2 Камеруудыг холбох

Connect your IP cameras to the PoE ports on the rear panel of the NVR using Ethernet cables. The PoE ports provide both power and data connection to compatible cameras.

Зураг 3: Camera Wiring Compatibility. This image illustrates that a standard network cable (Ethernet/PoE) is compatible for connecting cameras to this NVR, while traditional DC power and BNC video cables are not compatible.

4.3 Connecting to a Display and Network

• Мониторыг NVR-ийн HDMI эсвэл VGA гаралтын порт руу холбоно уу.
• Connect a USB mouse to one of the NVR's USB ports.
• Connect the NVR's LAN port to your network router or switch using an Ethernet cable for network access and remote viewчадварууд.

4.4 Асаах

Connect the provided power adapter to the NVR's 48V power input and then plug it into a power outlet. Flip the power switch on the rear panel to the ON position. The NVR will boot up, and you should see the boot screen on your connected monitor.

5. Ашиглалтын заавар

5.1 Анхны тохиргооны шидтэн

Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to set up language, date/time, network settings, and hard drive initialization.

5.2 Амьд View

Анхны тохиргооны дараа NVR нь шууд дамжуулалтыг харуулах болно view холбогдсон камеруудын. Та дан камер хооронд шилжиж болно view болон олон камерын сүлжээ view using the on-screen controls or the remote control.

5.3 Бичлэг хийх

The NVR supports continuous recording, scheduled recording, and motion-triggered recording. Configure recording schedules and settings via the main menu. Ensure your hard drive is initialized and healthy for recording.

5.4 Тоглуулах

Бүртгэгдсэн foo руу нэвтрэхtage through the playback menu. You can search for recordings by date, time, and event type. Use the playback controls to fast forward, rewind, and pause.

5.5 Сүлжээнд нэвтрэх болон алсын удирдлага Viewing

Once the NVR is connected to your network, you can access it remotely via a web browser or a dedicated mobile application. Refer to the NVR's network settings for IP address and port information. Ensure proper port forwarding is configured on your router for external access.

6. Засвар үйлчилгээ

6.1 Хатуу дискний менежмент

Regularly check the status of your hard drives through the NVR's menu. Format hard drives periodically if necessary, or configure them for overwrite mode to ensure continuous recording.

6.2 Програм хангамжийн шинэчлэлтүүд

Үйлдвэрлэгчийг шалгана уу website for available firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance and security. Follow the provided instructions carefully when performing updates.

6.3 Цэвэрлэгээ

Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation openings are free from dust and obstructions.

7. Алдаа засах

• Эрчим хүчгүй:

  Ensure the power adapter is securely connected to both the NVR and a working power outlet. Check the power switch on the rear panel.
• Видео гаралт байхгүй:

  Verify the HDMI/VGA cable is securely connected to both the NVR and the monitor. Ensure the monitor is powered on and set to the correct input source.

• Камерууд харагдахгүй байна:

  Check that cameras are properly connected to the PoE ports. Ensure cameras are powered on and compatible with the NVR. Verify network settings for IP cameras.

• Бичлэг байхгүй:

  Confirm that a hard drive is installed and properly initialized. Check recording schedules and ensure there is sufficient disk space. Verify camera connections.
• Алсын хандалтын асуудлууд:

  Ensure the NVR is connected to the network and has a valid IP address. Check router settings for port forwarding and firewall rules. Verify mobile app or web хөтчийн тохиргоо.

8. Техникийн үзүүлэлтүүд

9. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official TSL webсайт. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.

For further assistance, you may contact your local distributor or the manufacturer's customer service department.