ТС Цахим АЛДАРЫН ТАНХИМ 2 REVERB

TC Electronic HALL OF FAME 2 REVERB Pedal Instruction Manual

Model: HALL OF FAME 2 REVERB

1. Танилцуулга

The TC Electronic HALL OF FAME 2 REVERB is an iconic reverb pedal designed for guitarists seeking versatile and high-quality reverb effects. This manual provides essential information for setting up, operating, and maintaining your pedal.

2. Үндсэн шинж чанарууд

  • Innovative MASH Technology: The footswitch transforms into a pressure-sensitive expression controller, allowing for dynamic real-time effect manipulation.
  • Shimmer Reverb Algorithm: Elevates your reverb an octave through each feedback loop, delivering an ethereal and atmospheric sound.
  • Next-Generation Reverb Algorithms: Provides realistic and phenomenal-sounding reverb tones.
  • TonePrint идэвхжсэн: Create and customize unique tones for your pedal using the free TonePrint app, offering endless sonic possibilities.

3. Хяналт ба холболтууд

TC Electronic HALL OF FAME 2 REVERB pedal, top-down view

Зураг 1: Дээрээс доош view of the HALL OF FAME 2 REVERB pedal, showing controls and footswitch.

This image displays the top surface of the TC Electronic HALL OF FAME 2 REVERB pedal. Visible are four black rotary knobs and a single silver MASH footswitch. The knobs are labeled 'DECAY', 'TONE', 'LEVEL', and a multi-position 'TYPE' knob. The 'TYPE' knob allows selection between various reverb algorithms such as 'SPRING', 'PLATE', 'HALL', 'ROOM', 'CHURCH', 'MOD', 'LOFI', 'SHIMMER', and 'CLOUD'. The MASH footswitch is prominently located at the bottom center, featuring 'MASH' and 'TRUE BYPASS' labels.

TC Electronic HALL OF FAME 2 REVERB pedal, side view оролт/гаралтын залгууртай

Зураг 2: Хажуу тал view of the pedal, highlighting input and output jacks.

Энэ зураг нь нэг талыг харуулж байна view of the HALL OF FAME 2 REVERB pedal, revealing the input and output jacks. There are two input jacks labeled 'STEREO IN MONO' (1 and 2) and two output jacks labeled 'STEREO OUT MONO' (REVERB and 2). These 1/4-inch audio jacks allow for both mono and stereo connections, providing flexibility in signal routing.

TC Electronic HALL OF FAME 2 REVERB pedal, rear view цахилгаан оролттой

Зураг 3: Ар талд view of the pedal, showing power input and USB port.

The rear panel of the pedal is shown, featuring the power input and a USB port. The power input is a standard 9V DC 100mA jack. The USB port is used for connecting the pedal to a computer for TonePrint editing and firmware updates.

3.1. Хяналтын товчлуурууд

  • ХАСАХ: Controls the length of the reverb tail. Turn clockwise for longer decay, counter-clockwise for shorter.
  • Ая: Adjusts the brightness or darkness of the reverb. Clockwise for brighter, counter-clockwise for darker.
  • ТҮВШИН: Sets the overall mix level of the reverb effect with your dry signal.
  • ТӨРӨЛ: A multi-position switch to select different reverb algorithms (Spring, Plate, Hall, Room, Church, Mod, Lofi, Shimmer, Cloud).

3.2. MASH Footswitch

The MASH footswitch is a pressure-sensitive expression controller. Pressing harder on the footswitch dynamically alters a chosen effect parameter, offering expressive control beyond simple on/off switching. It also functions as a true bypass switch for activating/deactivating the effect.

3.3. Холболтууд

  • INPUT (1/4" Mono/Stereo): Connect your instrument or previous pedal in the signal chain here. Supports mono or stereo input.
  • OUTPUT (1/4" Mono/Stereo): Өөрийнхтэй холбогдоно уу amplifier or next pedal in the signal chain. Supports mono or stereo output.
  • POWER (9V DC, 100mA): Connect a regulated 9V DC power supply (center negative).
  • USB порт: For connecting to a computer to use the TonePrint Editor software and for firmware updates.

4. Тохируулах гарын авлага

  1. Бүх аудио тоног төхөөрөмжийг шалгах (amplifier, other pedals) is powered off.
  2. Connect your guitar to the INPUT jack(s) of the HALL OF FAME 2 REVERB pedal.
  3. Connect the OUTPUT jack(s) of the pedal to your ampөргөгч эсвэл дохионы гинжин хэлхээний дараагийн дөрөө.
  4. Connect a regulated 9V DC power supply (center negative, 100mA minimum) to the POWER input.
  5. Таныг асаагаарай amplifier and other audio equipment.

5. Ашиглалтын заавар

5.1. Үндсэн үйл ажиллагаа

  • Engage/Bypass: Press the MASH footswitch once to toggle the effect on or off. The LED indicator will illuminate when the effect is active.
  • Дуу чимээний төрлийг сонгох нь: Turn the TYPE knob to select your desired reverb algorithm.
  • Adjusting Reverb Parameters: Use the DECAY, TONE, and LEVEL knobs to fine-tune the selected reverb type to your preference.

5.2. MASH Footswitch Functionality

The MASH footswitch is a pressure-sensitive expression controller. Pressing harder on the footswitch dynamically alters a chosen effect parameter, offering expressive control beyond simple on/off switching. The specific parameter controlled by MASH can be customized using the TonePrint Editor.

5.3. TonePrint Functionality

The HALL OF FAME 2 REVERB is TonePrint enabled. This allows you to beam custom-tuned effects from your smartphone (via the free TonePrint app) directly to your pedal, or create your own unique reverb sounds using the TonePrint Editor software on your computer (via USB). Visit the TC Electronic website for more information and to download the app/software.

6. Техникийн үзүүлэлтүүд

ОнцлогТодорхойлолт
Хэмжээ (L x W x H)12.2 x 7.4 x 5 см
Жин340 грамм
Эрчим хүчний оролт9V DC, 100mA (center negative)
Ботьtage240 Volts (Adapter dependent)
Аудио эффектүүдReverb
Хяналтын төрөлPush button (MASH footswitch)
Тоног төхөөрөмжийн интерфейс1/4 inch Audio Jack
Дохионы форматАналог
Загварын дугаар000-CI300-00010

Анхааруулга: Техникийн үзүүлэлтүүд нь урьдчилан мэдэгдэлгүйгээр өөрчлөгдөж болно.

7. Алдаа засах

  • Дуугүй: Бүх кабелийн холболтыг шалгана уу (гитар, дөрөө, amplifier). Ensure the power supply is correctly connected and functioning. Verify the pedal is engaged (LED on).
  • Сул эсвэл гажуудсан дуу чимээ: Check instrument cables for damage. Ensure proper input levels from your guitar and output levels to your amplifier. Adjust the LEVEL knob on the pedal.
  • Үр нөлөө өөрчлөгдөхгүй: Ensure the TYPE knob is set correctly. If using TonePrint, verify the TonePrint has been successfully beamed to the pedal.
  • MASH Footswitch Not Responding: Ensure the pedal is powered and engaged. If customized via TonePrint, verify the MASH function is correctly assigned.

8. Баталгаат хугацаа ба дэмжлэг

Product warranty information is not available in the provided data. For detailed warranty terms and conditions, please refer to the official TC Electronic website or contact your local dealer. For technical support, visit the TC Electronic support page or consult the comprehensive online resources.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.