1. Танилцуулга ба Бүтээгдэхүүн дууссанview
Thank you for choosing the Stayer Professional Telescopic Miter Saw SCR 315 W. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before initial use and keep it for future reference.
This powerful 1800W miter saw is designed for precision cutting with a large capacity, capable of cutting materials up to 370 mm in length and 120 mm in height. Its belt-driven transmission significantly reduces noise and improves work quality. The robust yet lightweight aluminum base ensures stability and durability.
Зураг 1.1: Дууслааview of the Stayer Professional Telescopic Miter Saw SCR 315 W.
2. Аюулгүй ажиллагааны заавар
Гал түймэр, цахилгаанд цохиулах, гэмтэх эрсдэлийг бууруулахын тулд аюулгүй байдлын үндсэн арга хэмжээг үргэлж дагаж мөрдөөрэй. Хурдан лавлахын тулд энэ гарын авлагыг гартаа байлга.
Аюулгүй байдлын ерөнхий дүрмүүд:
- Аюулгүйн шил, сонсголын хамгаалалт, тоосны маск зэрэг хувийн хамгаалах хэрэгслийг (PPE) үргэлж зүүж байгаарай.
- Ажлын байр нь цэвэр, гэрэлтүүлэг сайтай, саад тотгоргүй байх ёстой.
- Хөрөө ажиллуулж байх үед хүүхдүүд болон хажууд байгаа хүмүүсийг хол байлга.
- Шатамхай шингэн, хий, тоос зэрэг тэсрэх аюултай орчинд цахилгаан хэрэгслийг бүү ажиллуул.
- Secure the workpiece firmly before cutting. Never hold small pieces by hand.
- Ensure the blade guard is always in place and functioning correctly.
- Disconnect the saw from the power source before making any adjustments, changing accessories, or performing maintenance.
- Use only sharp, clean blades of the correct size and type for the material being cut.
- Avoid awkward hand positions. Always maintain proper footing and balance.
3. Components and Key Features
Familiarize yourself with the various parts of your miter saw to ensure safe and effective operation.
Image 3.1: Labeled diagram of the miter saw components.
- Тээврийн бариул: For safe and easy carrying of the saw.
- Belt Motor: 1800W motor with belt transmission for quiet and efficient operation.
- Telescopic Rail: Allows for extended cutting capacity up to 370mm.
- Босоо Clamp: Secures the workpiece for stable cutting.
- Толгойг хазайлгах: Adjustable from -45° to +45° for bevel cuts in both directions.
- Extendable Support: Provides additional support for longer workpieces.
- Adjustable Rotary Table: Allows for precise miter angle adjustments (0°/22.5°/45°).
- Резинэн хөл: Ensures stability and reduces vibration during operation.
- Лазер гарын авлага: Provides a precise cutting line for improved accuracy.
Image 3.2: Additional features and technical data overview.
4. Тохиргоо
Although the saw comes largely pre-assembled, some setup is required before first use.
Савлах, байрлуулах:
- Carefully remove the saw and all accessories from the packaging.
- Inspect the saw for any shipping damage. Do not operate if damaged.
- Place the saw on a stable, level workbench or stand that can support its weight (approx. 19 kg) and the workpiece. Ensure sufficient space around the saw for safe operation and material handling.
- Ensure the rubber feet are securely positioned to prevent movement.
Анхны тохируулга:
- Verify that all locking mechanisms for the miter table, bevel head, and telescopic rail are functioning correctly.
- Check the alignment of the blade with the miter scale and laser guide. Adjust if necessary according to the calibration section (if applicable in a detailed manual).
- Connect the saw to a suitable power outlet (220V AC).
Зураг 4.1: View of the miter table and fence, ready for setup.
5. Ашиглалтын заавар
Хэрээгээ аюулгүй, үр дүнтэй ажиллуулахын тулд эдгээр алхмуудыг дагана уу.
Basic Cutting Procedure:
- Ажлын хэсгийг бэлтгэх: Mark your desired cut line on the material.
- Тохиргоог тохируулах: Set the desired miter angle on the rotary table and the bevel angle on the tilting head. Secure all locking levers.
- Ажлын хэсгийн байрлал: Place the workpiece firmly against the fence and the saw table. Use the vertical clamp to secure it. Ensure the material is fully supported, using the extendable supports if needed.
- Align Cut: Lower the saw head slightly (without starting the motor) to align the blade with your marked cut line. Use the laser guide for precise alignment.
- Хөрөө эхлүүлэх: Ensure your hands are clear of the blade path. Press the power switch to start the motor. Allow the blade to reach full speed before beginning the cut.
- Тайрах: Slowly and steadily lower the saw head through the workpiece. For telescopic cuts, push the saw head forward along the rail as you cut.
- Бүрэн зүсэлт: Once the cut is complete, release the power switch and allow the blade to stop completely before raising the saw head.
- Ажлын хэсгийг зайлуулах: Carefully remove the cut material and any off-cuts.
Image 5.1: The miter saw in action, demonstrating a cut.
Зураг 5.2: Ойролцоогоор view of the cutting process, showing the laser guide.
6. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны хөрөөний урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.
Цэвэрлэгээ:
- After each use, disconnect the saw from power and clean off sawdust and debris using a brush or vacuum cleaner.
- Pay special attention to the blade guard, miter scale, and telescopic rails to ensure smooth operation.
- The dust collection system is designed to minimize sawdust, but regular cleaning of the dust bag/port is essential.
Blade Care and Replacement:
- Regularly inspect the saw blade for sharpness, cracks, or missing teeth. A dull blade can cause kickback and poor cut quality.
- When replacing the blade, ensure the saw is unplugged. Follow the instructions in your saw's specific blade replacement guide. Use only blades with a 315mm diameter and appropriate arbor size.
Туузны үзлэг:
- Periodically inspect the drive belt for wear, cracks, or slippage. A worn belt can affect performance and increase noise.
- Refer to the service manual for instructions on belt replacement if necessary.
Image 6.1: Close-up of the blade and guard, important for maintenance checks.
7. Алдаа засах
Энэ хэсэгт таны хөрөөтэй холбоотой нийтлэг асуудлуудыг авч үзнэ.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хөрөө эхлэхгүй байна | No power, faulty switch, motor issue | Check power connection, circuit breaker. If problem persists, contact service. |
| Зүссэн чанар муу (барзгар, хагархай) | Dull blade, incorrect blade for material, improper feed rate, workpiece not secure | Replace or sharpen blade. Use appropriate blade. Adjust feed rate. Secure workpiece firmly. |
| Хэт их чичиргээ эсвэл дуу чимээ | Loose blade, worn belt, damaged bearings, unstable setup | Check blade tightness. Inspect belt for wear. Ensure saw is on a stable surface. If severe, seek professional service. |
| Laser guide not accurate | Misalignment, dirty laser lens | Clean laser lens. Refer to specific instructions for laser calibration (if available). |
| Тоос цуглуулах үр дүнгүй | Dust bag full, clogged port, improper connection | Empty dust bag. Clear any clogs in the dust port. Ensure connections are secure. |
| Play/wobble in saw head or table | Loose components, manufacturing defect | Check for any accessible tightening points. If significant play affects accuracy or safety, contact customer support. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact Stayer customer support.
8. Техникийн үзүүлэлтүүд
Detailed specifications for the Stayer Professional Telescopic Miter Saw SCR 315 W.
| Тодорхойлолт | Үнэ цэнэ |
|---|---|
| Загварын дугаар | 1.1933 |
| Үйлдвэрлэгч | БУУДАГ |
| Эрчим хүчний эх үүсвэр | Утастай цахилгаан |
| Ботьtage | 220 вольт (AC) |
| Хүч | 1800 ватт |
| Хурд | 3500 эргэлт |
| Хутганы материал | Aluminum Oxide (typical for general purpose blades) |
| Онцлог шинж чанар | Silent (Belt Drive) |
| Зүйлийн жин | 19 кг |
| Багцын хэмжээ | 95 x 55 x 55 см |
| Cutting Capacity (Length) | 370 мм хүртэл |
| Таслах хүчин чадал (өндөр) | 120 мм хүртэл |
9. Баталгаат хугацаа ба дэмжлэг
Баталгаат хугацааны талаарх мэдээллийг худалдан авалттайгаа хамт ирсэн баталгаат карт эсвэл баримт бичгээс үзнэ үү. Баталгаат хугацааны нөхцөл, болзол нь бүс нутаг болон жижиглэн худалдаа эрхлэгчээс хамаарч өөр өөр байж болно.
If you require technical assistance, spare parts, or have questions regarding the operation or maintenance of your Stayer Professional Telescopic Miter Saw, please contact Stayer customer support or your authorized dealer. Have your model number (1.1933) and purchase details ready when contacting support.