LoraTap Wireless Outlet Remote Control Kit

1. Аюулгүй байдлын мэдээлэл

Энэ бүтээгдэхүүнийг хэрэглэхээсээ өмнө аюулгүй байдлын бүх зааврыг уншиж, ойлгоорой. Эдгээр зааврыг дагаж мөрдөхгүй байх нь цахилгаан цочрол, гал түймэр эсвэл ноцтой гэмтэл учруулж болзошгүй.

• Хамгийн их ачааны багтаамжийг 15-аас хэтрүүлж болохгүй Amps or 1875 Watts for each outlet. Overloading can cause overheating and fire.
• This product is designed for indoor use only. Do not expose to water or damp нөхцөл.
• Ensure the outlet is fully inserted into a standard wall receptacle.
• Хүүхдийн гар хүрэхгүй газар хадгална.
• Төхөөрөмжийг задлах, өөрчлөхийг хориглоно.
• Цэвэрлэхийн өмнө төхөөрөмжийг ханын залгуураас салга.

2. Багцын агуулга

Your LoraTap Wireless Outlet Remote Control Kit includes:

• 2 x Slim Oval 15A Wireless Outlets
• 1 x Ergonomic Round Remote Control
• 1 x Magnetic Wall Base for Remote
• 1 x CR2032 Coin Cell Battery (pre-installed in remote)

3. Бүтээгдэхүүн дууссанview

The LoraTap Wireless Outlet Remote Control Kit provides convenient one-touch control for your household appliances and lighting. Its ergonomic remote and magnetic base offer flexible placement options, while the robust 915MHz signal ensures reliable operation up to 100 feet through walls and floors.

Image: LoraTap Wireless Outlet Remote Control Kit, showing the remote and two outlets, highlighting one-touch control for hard-to-reach sockets.

Гол онцлогууд:

• Нэг мэдрэгчтэй удирдлага: Effortlessly power 2 devices with a single remote.
• Ergonomic Remote & Magnetic Base: Comfort grip remote with built-in magnetism and an adhesive magnetic wall base for easy, damage-free placement.
• Powerful & Stable Signal: Utilizes 915MHz frequency for a stable, less-interrupted 100ft signal through walls and floors.
• Залгаад Тоглуулах: No complicated setup, Wi-Fi, or app required.
• Санах ойн функц: Outlets retain their ON/OFF state after a power outage and restore it upon power return.
• Ямар ч хөндлөнгийн оролцоо: Each product has an independent ID, allowing multiple sets to be used simultaneously without interference.

Image: Illustration demonstrating the memory function of the LoraTap outlet, showing it restoring its state after a power failure.

Image: Diagram illustrating how multiple LoraTap outlet sets can operate simultaneously without interference due to independent IDs.

4. Тохиргоо

Setting up your LoraTap Wireless Outlet is a simple plug-and-play process:

1. Баглаа задлах: Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг салгана.
2. Залгаас: Insert the wireless outlets into standard 3-prong wall sockets. Ensure they are securely plugged in.
3. Initial Pairing (if needed): The outlets and remote are pre-paired from the factory. If they do not respond, refer to Section 6: Pairing/Unpairing Instructions.
4. Mount Remote: Attach the magnetic wall base to a desired clean, dry surface using its adhesive backing. The remote can then be magnetically attached to the base or any metal surface (e.g., refrigerator).

Image: Step-by-step guide showing how to open the package, plug in the device, and use the remote for instant control.

Image: The magnetic remote control attached to a refrigerator, demonstrating its magnetic feature and adhesive base for easy mounting without drilling.

5. Ашиглалтын заавар

The remote control features two sets of ON/OFF buttons, allowing you to control two separate wireless outlets (or groups of outlets if paired differently).

Image: A hand holding the LoraTap remote control, highlighting the ON and OFF buttons for instant control of lights and fans.

1. АСААХ: Press the 'ON' button corresponding to the desired outlet. The connected appliance will power on.
2. Унтраах: Press the 'OFF' button corresponding to the desired outlet. The connected appliance will power off.

The remote's signal can reach up to 100 feet indoors, even through walls and floors, providing flexible control throughout your home.

Image: Diagram illustrating the super remote control distance, showing the signal passing through a brick wall to control two outlets.

6. Pairing/Unpairing Instructions

The outlets and remote are typically pre-paired. If you need to re-pair, pair additional remotes/outlets, or clear existing pairings, follow these steps:

To Pair an Outlet with a Remote Button:

1. Утасгүй залгуурыг ханын залгуурт холбоно уу.
2. Press and hold the small power button on the side of the wireless outlet until its indicator light begins to blink slowly.
3. While the outlet's light is blinking, press the desired 'ON' button on the remote control. The outlet's light will stop blinking and turn solid blue, indicating successful pairing for the 'ON' function.
4. Repeat step 2, then press the corresponding 'OFF' button on the remote control to pair the 'OFF' function. The outlet's light will turn off, confirming successful pairing.

To Clear All Pairings from an Outlet:

If you encounter issues or wish to reconfigure an outlet, you can clear its existing pairings:

• Утасгүй залгуурыг ханын залгуурт холбоно уу.
• Press and hold the small power button on the side of the wireless outlet for approximately 10 seconds. The indicator light will blink rapidly, then turn off, indicating all previous pairings have been cleared.

7. Засвар үйлчилгээ

• Цэвэрлэгээ: Use a dry, soft cloth to clean the devices. Do not use liquid cleaners or sprays.
• Зай солих: The remote control uses a CR2032 coin cell battery. When the remote's indicator light dims or it becomes unresponsive, replace the battery. To replace, gently pry open the remote's back cover, remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up.

Image: Detailed diagram of the remote control, showing its dimensions and the location for the CR2032 coin cell battery.

8. Алдаа засах

• Outlet not responding to remote:
  • Ensure the remote's battery is not depleted. Replace if necessary.
  • Verify the outlet is securely plugged into a live wall socket.
  • Check if the remote and outlet are within the 100ft operating range.
  • Re-pair the outlet with the remote following the instructions in Section 6.
• Multiple outlets respond to one button:
  • This indicates multiple outlets are paired to the same remote button. Clear all pairings from the affected outlets (Section 6) and then re-pair them individually to different remote buttons as desired.
• Outlet indicator light not turning on:
  • Ensure the wall socket has power. Test with another appliance.
  • If the outlet is new, press the small power button on its side to activate it.

9. Техникийн үзүүлэлтүүд

Note: An image in the product listing indicates a load power of ≤3680W 16A. However, the primary specifications state 15A/1875W. Please adhere to the 15A/1875W rating for safe operation.

Image: Detailed dimensions of the LoraTap wireless outlet and remote control.

10. Баталгаат хугацаа ба дэмжлэг

LoraTap products are designed for reliability and performance. For any questions, technical support, or warranty inquiries, please contact LoraTap customer service through the retailer where the product was purchased or visit the official LoraTap brand store.

Visit the LoraTap Brand Store