EDUP EP-9651GS-R PCI-E WiFi 6 Network Card with Bluetooth 5.2 Instruction Manual

1. Танилцуулга

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EDUP EP-9651GS-R PCI-E WiFi 6 Network Card. This device is designed to enhance your desktop PC's wireless connectivity with Wi-Fi 6 (802.11ax) technology and Bluetooth 5.2 capabilities, compatible with Windows 10 and Windows 11 64-bit operating systems. Please read this manual carefully before installation to ensure proper setup and optimal performance.

2. Багцын агуулга

Доор жагсаасан бүх зүйл таны багцад байгаа эсэхийг шалгаарай. Хэрэв ямар нэг зүйл дутуу эсвэл эвдэрсэн бол жижиглэн худалдаалагчтайгаа холбоо барина уу.

• 1 x EDUP EP-9651GS-R PCI-E WiFi 6 Network Card
• 2 x 6dBi Dual Band Antennas
• 1 x Bluetooth 9-pin USB Cable
• 1 x Бага зэрэгтэйfile Bracket (for small form factor PCs)
• 1 х халив
• Суурилуулах эрэг
• 1 x Driver CD (or download instructions)

3. Тохиргоо ба суурилуулалт

3.1 Техник хангамж суурилуулах

Follow these steps to install the network card into your desktop PC. Ensure your computer is powered off and unplugged before proceeding.

1. Компьютерээ бэлдээрэй: Power off your computer and unplug the power cord. Open the side panel of your PC case.
2. Locate a PCI-E slot: Identify an available PCI-E X1, X4, X8, or X16 slot on your motherboard. This card is not compatible with standard PCI slots.
3. Insert the Network Card: Carefully align the network card with the chosen PCI-E slot and press it firmly until it is securely seated.
4. Connect the Bluetooth Cable: Locate the 9-pin USB header (often labeled F_USB) on your motherboard. Connect the white end of the provided Bluetooth 9-pin USB cable to the corresponding port on the network card, and the other end to the 9-pin USB header on your motherboard. This connection is essential for Bluetooth functionality.
   

   Image: The Bluetooth 9-pin USB cable connecting the EDUP WiFi 6 card to the motherboard's USB header.

5. Картыг хамгаалах: Use the provided screws to secure the network card's bracket to your PC case. If you have a small form factor PC, use the included low-profile хаалт.
6. Антеныг холбох: Screw the two 6dBi dual-band antennas onto the connectors at the back of the network card. Adjust their position for optimal signal reception.
   

   Image: The EDUP WiFi 6 network card with its two external antennas installed on the rear of a PC case.
7. Компьютерийн гэрийг хаах: Replace the side panel of your PC case and reconnect the power cord.

3.2 Драйвер суурилуулах

After hardware installation, you need to install the drivers for both Wi-Fi and Bluetooth functionality. This card is compatible with Windows 10/11 64-bit.

1. Драйверын CD-г ашиглах нь: Insert the provided driver CD into your optical drive and follow the on-screen instructions to install the Wi-Fi and Bluetooth drivers.
2. Драйверуудыг татаж байна: If your PC does not have an optical drive or if you encounter issues with the CD, download the latest drivers from the official Intel webсайт эсвэл EDUP webсайт (szedup.com). хайх drivers compatible with the Intel AX200 chipset.
3. Суулгах үйл явц: Run the downloaded driver setup files. Follow the prompts, accepting the license agreements and completing the installation. A system restart may be required after installation.

4. Ашиглалтын заавар

4.1 Wi-Fi-д холбогдож байна

Once the drivers are installed, you can connect to a wireless network:

1. Click the Wi-Fi icon in the system tray (usually in the bottom-right corner of your screen).
2. Жагсаалтаас хүссэн Wi-Fi сүлжээгээ сонгоно уу.
3. "Холбох" дээр товшоод асуувал сүлжээний аюулгүй байдлын түлхүүрийг (нууц үг) оруулна уу.
4. Одоо таны компьютер Wi-Fi сүлжээнд холбогдсон байх ёстой.

4.2 Bluetooth төхөөрөмжүүдийг холбох

To connect Bluetooth devices, ensure the Bluetooth 9-pin cable is correctly installed.

1. Windows Тохиргоо > Төхөөрөмжүүд > Bluetooth болон бусад төхөөрөмжүүд рүү очно уу.
2. Ensure Bluetooth is turned "On".
3. "Bluetooth эсвэл өөр төхөөрөмж нэмэх" дээр товшоод "Bluetooth"-г сонгоно уу.
4. Bluetooth төхөөрөмжөө хослуулах горимд оруулна уу.
5. Хослолтыг дуусгахын тулд жагсаалтаас төхөөрөмжөө сонгоод дэлгэцэн дээрх зааврыг дагана уу.

5. Техникийн үзүүлэлтүүд

6. Алдаа засах

If you encounter issues with your EDUP network card, refer to the following common solutions:

• Wi-Fi эсвэл Bluetooth илэрсэнгүй:
  • Ensure the card is securely seated in the PCI-E slot.
  • Verify that the Bluetooth 9-pin USB cable is correctly connected to both the card and the motherboard.
  • Check Device Manager in Windows to see if the Wi-Fi and Bluetooth adapters are recognized and have no error symbols.
  • Reinstall the latest drivers from the Intel or EDUP webсайт.
• Wi-Fi дохио муу эсвэл хурд удаан байна:
  • Adjust the position of the external antennas for better reception.
  • Ensure your router supports Wi-Fi 6 (802.11ax) for optimal performance.
  • Бусад электрон төхөөрөмжүүдийн хөндлөнгийн оролцоог шалгана уу.
  • Чиглүүлэгчийнхээ програм хангамжийг шинэчил.
• Bluetooth ажиллахгүй байна:
  • Confirm the Bluetooth 9-pin USB cable is connected. This cable is mandatory for Bluetooth functionality.
  • Windows тохиргоонд Bluetooth идэвхжсэн эсэхийг шалгана уу.
  • Reinstall the Bluetooth driver.

7. Баталгаат хугацаа ба дэмжлэг

EDUP provides a 3-year manufacturer replacement warranty for this product. Additionally, a 90-day no-questions-asked return policy is offered. For any assistance, technical support, or warranty claims, please contact us via Amazon message. We are committed to providing prompt and helpful service.