RYOBI 10 in. Compound Miter Saw with LED Instruction Manual

1. Танилцуулга

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the RYOBI 10 inch Compound Miter Saw with LED, Model TS1346. Please read and understand all instructions before operating the saw to ensure personal safety and proper tool function. This heavy-duty miter saw is designed for precision cutting of wood materials, featuring a 14 Amp motor delivering up to 5,500 RPM and an LED Cutline Indicator for enhanced accuracy.

2. Аюулгүй байдлын ерөнхий мэдээлэл

АНХААРУУЛГА: Энэхүү цахилгаан хэрэгсэлд өгөгдсөн бүх аюулгүй байдлын анхааруулга, заавар, зураг чимэглэл, техникийн үзүүлэлтүүдийг уншина уу. Доор жагсаасан бүх зааврыг дагаж мөрдөхгүй байх нь цахилгаан цочрол, гал болон/эсвэл хүнд гэмтэл учруулж болзошгүй.

• Always wear eye protection, hearing protection, and a dust mask when operating the miter saw.
• Ажлын хэсэг найдвартай байгаа эсэхийг шалгаарай clampямар нэгэн зүсэлт хийхээс өмнө ed.
• Keep hands and fingers away from the blade area. Never reach under the blade guard.
• Disconnect the power supply before changing blades, performing maintenance, or clearing jammed material.
• Maintain a clean and well-lit work area. Cluttered or dark areas invite accidents.
• Шатамхай шингэн, хий, тоос зэрэг тэсрэх аюултай орчинд цахилгаан хэрэгслийг бүү ажиллуул.
• Зүсэж буй материалын хувьд зөв ирийг ашиглана.
• Never force the tool. Let the blade speed and sharpness do the work.
• Ажиллахын өмнө хөрөө тогтвортой, найдвартай бэхлэгдсэн эсэхийг шалгаарай.

3. Багцын агуулга

Verify that all items listed below are included in your package. If any parts are missing or damaged, contact RYOBI customer service.

• RYOBI 10 in. Compound Miter Saw with LED
• 24-tooth Carbide-Tipped Blade
• Ирт эрэг чангалах түлхүүр
• Тоос цүнх
• Ажлын Clamp
• Операторын гарын авлага (энэ баримт бичиг)

4. Тохиргоо

4.1 Савлах, угсрах

Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during shipping. Place the saw on a stable, level workbench or miter saw stand.

4.2 Ир суурилуулах

1. Хөрөөг тэжээлийн эх үүсвэрээс салгасан эсэхийг шалгаарай.
2. Ирийг эргэлдэхээс сэргийлэхийн тулд ээрүүл түгжих товчийг дарна уу.
3. Using the provided blade wrench, loosen the arbor nut by turning it clockwise (it is reverse-threaded).
4. Remove the outer blade washer and the old blade (if applicable).
5. Place the new 24-tooth carbide-tipped blade onto the arbor, ensuring the teeth are pointing downwards towards the front of the saw.
6. Reinstall the outer blade washer and arbor nut. Tighten the arbor nut firmly by turning it counter-clockwise while holding the spindle lock.

4.3 Dust Bag Attachment

Attach the dust bag to the dust port located at the rear of the blade housing. This helps collect sawdust and maintain a cleaner work environment.

Figure 4.1: The Ryobi 10 inch Compound Miter Saw with LED, showing its overall design and key components.

5. Ашиглалтын заавар

5.1 Асаах, унтраах

To turn the saw ON, press the trigger switch on the handle. To turn it OFF, release the trigger switch. The saw features a brake for quick blade stops.

5.2 Adjusting Miter Angle

To adjust the miter angle, depress the miter lock handle and rotate the turntable to the desired angle indicated on the miter scale. Release the handle to lock the angle. Common detents are provided for quick adjustments at standard angles (e.g., 0°, 15°, 22.5°, 31.6°, 45°).

5.3 Using the LED Cutline Indicator

The integrated LED projects a shadow line onto the workpiece, indicating the exact cutting path of the blade. Align your pencil mark with this shadow line for precise cuts. Ensure the LED is clean for optimal visibility.

5.4 Зүсэлт хийх

1. Place the workpiece firmly against the fence and the saw table.
2. Secure the workpiece with the work clamp to prevent movement during the cut.
3. Lower the blade slowly into the workpiece, allowing the blade to reach full speed before engaging the material.
4. Maintain a steady, controlled feed rate. Do not force the saw.
5. Once the cut is complete, allow the blade to stop completely before raising the saw arm.

6. Засвар үйлчилгээ

Regular maintenance ensures the longevity and safe operation of your miter saw. Always disconnect the saw from the power source before performing any maintenance.

6.1 Цэвэрлэгээ

• After each use, clean the saw with a soft cloth to remove sawdust and debris.
• Use compressed air to clear dust from motor vents and moving parts.
• Periodically empty and clean the dust bag for efficient dust collection.

6.2 Хутга арчилгаа

• Inspect the blade regularly for dullness, cracks, or missing teeth. Replace damaged blades immediately.
• Clean resin and pitch buildup from the blade using a blade cleaner.

6.3 Тосолгоо

The saw's internal components are factory-lubricated and generally do not require additional lubrication. Refer to the full operator's manual for specific lubrication points if necessary.

7. Алдаа засах

8. Техникийн үзүүлэлтүүд

Загварын дугаар:

TS1346

Брэнд:

RYOBI

Эрчим хүчний эх үүсвэр:

Утастай цахилгаан

Ботьtage:

120 вольт

Ватtage:

1680 ватт

Хурд:

5500 эргэлт

Хутганы диаметр:

10 инч

Шүдний тоо:

24 (Carbide-Tipped)

Онцлог шинж чанарууд:

Brake, Spindle Lock, LED Cutline Indicator

Material (Handle):

Хуванцар

Аюулгүй байдлын стандарт:

UL safety standards

Хэмжээ (L x W x H):

10"L x 2"W x 10"H (Note: These dimensions typically refer to the blade, not the full saw. Refer to manufacturer's full specifications for tool dimensions.)

9. Баталгаат хугацаа ба дэмжлэг

The RYOBI 10 in. Compound Miter Saw with LED is backed by the RYOBI 3-Year Manufacturer's Warranty. For warranty claims, technical support, or to order replacement parts, please contact RYOBI customer service or visit their official webсайт. Худалдан авалтын баримтаа баталгаат хугацаагаар хадгалах.

ЕХ-ны сэлбэг хэрэгслийн бэлэн байдлын хугацаа: 3 жил

For further assistance, please refer to the official RYOBI webсайт эсвэл хэрэглэгчийн тусламжийн шугамтай холбогдоно уу.