TOPYIYI HDMI Splitter 1 in 2 out Instruction Manual

1. Танилцуулга

The TOPYIYI HDMI Splitter (Model HS-01) is designed to distribute a single HDMI audio and video signal from one source device to two HDMI display devices simultaneously. This device supports resolutions up to 4K@30Hz and includes HDCP1.4 bypass functionality, making it suitable for various home entertainment and professional setups. It ensures identical content is displayed on both connected screens without signal loss or degradation.

2. Бүтээгдэхүүний онцлог

1 Input to 2 Outputs: Distributes one HDMI source signal to two HDMI displays simultaneously.
Өндөр нарийвчлалтай дэмжлэг: Supports resolutions up to 4K x 2K@30Hz, 1080P@60Hz, 1080P@30Hz, and 3D/720P.
HDCP1.4 Bypass: Allows compatibility with devices requiring HDCP content protection.
Өргөн нийцтэй байдал: Compatible with HDMI 1.4/1.3/1.2/1.1/1.0 and most standard HDMI interface devices.
Fast & Stable Transmission: Features gold-plated HDMI connectors and supports 10.2G bandwidth for reliable signal transfer up to 50ft.
Plug and Play: Easy setup without requiring external drivers.
Built-in HDMI Cable: Includes a 1.64ft (50cm) built-in HDMI cable for direct connection to the source.
Нэмэлт гадаад цахилгаан: USB power supply (cable included) can be used for enhanced signal stability, especially when the input device does not provide sufficient power.

3. Багцын агуулга

Хүлээн авахдаа багцын агуулгыг шалгаж, бүх зүйл байгаа эсэхийг шалгана уу:

1x TOPYIYI HDMI Splitter (Model HS-01)
1х USB цэнэглэгч кабель
1x хэрэглэгчийн гарын авлага

4. Тохируулах заавар

Follow these steps to connect your HDMI splitter:

HDMI эх үүсвэрийг холбоно уу: Plug the built-in HDMI cable from the TOPYIYI HDMI Splitter into the HDMI output port of your source device (e.g., Xbox, PS4, Fire Stick, PC).
HDMI дэлгэцүүдийг холбох: Connect two HDMI cables (not included) from the "OUTPUT 1" and "OUTPUT 2" ports of the splitter to the HDMI input ports of your two display devices (e.g., TVs, monitors, projectors).
Optional Power Connection: If your source device does not provide sufficient power, or if you experience signal instability, connect the provided USB charging cable to the splitter's DC 5V port and then to a USB power source (e.g., a USB wall adapter, TV USB port, or PC USB port).
Асаах төхөөрөмжүүд: Power on your HDMI source device and both display devices.
Оролтоо сонгоно уу: Ensure your display devices are set to the correct HDMI input source.

Diagram showing a laptop connected to the HDMI splitter, which then connects to two monitors, illustrating the mirror screen function.

Figure 1: Connection Diagram for Mirroring to Two Monitors.

Close-up of the TOPYIYI HDMI splitter showing the HDMI input, two HDMI outputs, power indicator, and DC 5V power input, with labels.

Зураг 2: Нарийвчилсан view of the HDMI Splitter ports and indicators.

Video 1: Official product video demonstrating the connection process and features of the TOPYIYI HDMI Splitter.

5. Ашиглалтын заавар

Once connected, the TOPYIYI HDMI Splitter operates automatically:

The splitter will automatically duplicate the signal from your single HDMI source to both connected display devices.
The content displayed on both output screens will be identical (mirror mode).
The device is designed for plug-and-play functionality, requiring no additional software or complex configuration.
The blue indicator lights on the splitter confirm power and active connections.

Image showing a laptop connected to the TOPYIYI HDMI splitter, which then outputs to two large monitors, all displaying the same scenic image, with text 'ONE SOURCE TWO DISPLAYS' and 'Mirror only, not support extend!!'.

Figure 3: The HDMI splitter duplicates a single source to two displays.

6. Чухал тэмдэглэл ба хязгаарлалтууд

Mirror Screen Only: This HDMI splitter only mirrors the screen; it does not support extended desktop mode for PCs. Both output screens will display the exact same image.
No Audio Extraction: This splitter does not extract audio. Audio will be passed through to the HDMI displays. It cannot split audio to a soundbar independently.
Resolution Handling: If two output displays have different maximum resolutions (e.g., one 4K and one 1080p), the splitter will output to the lowest common resolution supported by both displays (e.g., both will display 1080p). If the lower-resolution display is powered off, the splitter will re-scan and output to the higher resolution for the remaining active display.
Эрчим хүчний шаардлага: While the splitter can draw power from the HDMI source, using the provided USB power cable is recommended for stable signal transmission, especially with demanding devices or longer cable runs.

Diagram illustrating correct and incorrect uses of the HDMI splitter. It shows a laptop mirroring to two monitors (correct), but explicitly states it does not support PC extended mode or audio extraction to a soundbar.

Figure 4: Visual guide on supported and unsupported configurations.

7. Алдаа засах

Хэрэв танд асуудал тулгарвал дараах нийтлэг шийдлүүдийг үзнэ үү.

Асуудал	Боломжит шалтгаан	Шийдэл
No picture on one or both displays.	Сул HDMI кабелийн холболтууд. Insufficient power supply to the splitter. Incorrect input selection on the display. Тохиромжгүй нягтралын тохиргоо.	Бүх HDMI кабель найдвартай холбогдсон эсэхийг шалгаарай. Connect the USB power cable to the splitter and a reliable power source. Verify that your displays are set to the correct HDMI input. Try lowering the resolution on your source device. Power cycle all connected devices (source, splitter, displays).
Picture flickering or unstable signal.	Хүч чадал хангалтгүй. Long or low-quality HDMI cables. Хөндлөнгийн оролцоо.	Ensure the USB power cable is connected and providing stable power. Use shorter, high-quality HDMI cables (especially for 4K resolutions). Ensure the splitter is not near strong electromagnetic interference sources.
Аудио байхгүй.	Эх үүсвэр эсвэл дэлгэц дээрх аудио тохиргоо. This splitter does not support audio extraction.	Check audio output settings on your source device and input settings on your displays. Confirm that your displays have built-in speakers or are connected to an external audio system. This splitter passes audio through HDMI; it does not provide separate audio outputs.
Displays show different resolutions.	Displays have different native resolutions.	The splitter will output to the lowest common resolution. This is expected behavior. If you require a specific higher resolution, ensure both displays support it.

8. Техникийн үзүүлэлтүүд

Онцлог	Дэлгэрэнгүй
Загварын дугаар	HS-01
Оролтын портууд	1х HDMI
Гаралтын портууд	2х HDMI
HDMI хувилбар	Compatible with HDMI 1.4/1.3/1.2/1.1/1.0
HDCP-ийн дэмжлэг	HDCP1.4 Bypass
Дэмжигдсэн тогтоолууд	4K x 2K@30Hz, 1080P@60Hz, 1080P@30Hz, 3D/720P
Хамгийн их зурвасын өргөн	10.2 Gbps
Дамжуулах хамгийн их зай	Up to 50ft (15 meters) between input and output devices
Эрчим хүчний хангамж	DC 5V (via Micro USB cable, included)
Бүтээгдэхүүний хэмжээс	2.17 x 2.76 x 0.79 инч
Зүйлийн жин	4.2 унц
Үйлдвэрлэгч	TOPYIYI

9. Засвар үйлчилгээ

To ensure the longevity and optimal performance of your TOPYIYI HDMI Splitter, please follow these maintenance guidelines:

Цэвэрлэгээ: Use a soft, dry cloth to clean the device. Avoid using liquid or aerosol cleaners.
Хадгалах: Төхөөрөмжийг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
Харьцуулах: Handle the device and its cables with care. Avoid bending or pulling cables forcefully.
Агааржуулалт: Хэт халалтаас урьдчилан сэргийлэхийн тулд төхөөрөмж хангалттай агааржуулалттай, таглаагүй эсэхийг шалгаарай.

10. Баталгаат хугацаа ба дэмжлэг

Specific warranty information for the TOPYIYI HDMI Splitter (Model HS-01) is typically provided with your purchase documentation or can be found on the official TOPYIYI website. For technical support, troubleshooting assistance, or warranty claims, please refer to the contact information provided by your retailer or the manufacturer.

TOPYIYI HS-01