1. Танилцуулга
This manual provides comprehensive instructions for the setup, operation, and maintenance of your DIGITUS 2D Barcode Scanner (Model: DA-81002). This device is designed for efficient and accurate scanning of 1D and 2D barcodes, including QR codes, supporting bi-directional scanning at 200 scans/sec. Please read this manual thoroughly before using the scanner to ensure proper functionality and longevity.
2. Хайрцагт юу байна
Багцыг нээхдээ бүх бүрэлдэхүүн хэсгүүд байгаа бөгөөд гэмтэлгүй эсэхийг шалгана уу.
- 1 x 2D barcode hand scanner, QR code compatible
- 1 x scanner holder
- 1 x cable, USB - RJ45, 2 m
- 1 x Хурдан суулгах гарын авлага (QIG)
Image: The DIGITUS 2D Barcode Scanner, shown with its included stand and USB-RJ45 cable. The scanner is dark grey with an orange trigger button.
3. Тохиргоо
- Кабелийг холбоно уу: Insert the RJ45 end of the provided cable into the port at the base of the barcode scanner. Ensure it clicks securely into place.
- Хост төхөөрөмжид холбогдох: Plug the USB end of the cable into an available USB port on your computer or point-of-sale (POS) system.
- Драйвер суурилуулах (Залгаад тоглуулах): The scanner is typically plug-and-play and should be recognized automatically by most operating systems (Windows, macOS, Linux). No specific driver installation is usually required. If prompted, allow the system to install necessary drivers.
- Сканнерыг байрлуулах: Place the scanner in its holder for hands-free operation, or hold it comfortably for handheld scanning.
- Test Scan: Open a text editor (e.g., Notepad, Word) or a compatible application. Scan a known barcode. The data should appear in the open application.
4. Ашиглалтын заавар
The DIGITUS 2D Barcode Scanner is designed for ease of use. Follow these steps for effective scanning:
- Асаах: The scanner powers on automatically when connected to a powered USB port. A successful power-on is usually indicated by a short beep and/or a light indicator.
- Зорилго: Point the scanning window towards the barcode you wish to scan. Ensure the entire barcode is within the scanner's field of view.
- Скан хийж байна: Press and hold the trigger button (orange button on the handle). A red aiming beam or illumination light will appear. Position the scanner so the aiming beam crosses the center of the barcode.
- Амжилттай скан хийх: Upon a successful scan, the scanner will emit a short beep and/or the indicator light will flash. The scanned data will be transmitted to your connected device as if typed via a keyboard.
- Bi-Directional Scanning: The scanner supports bi-directional scanning, meaning it can read barcodes regardless of their orientation, improving scanning efficiency.
- QR Code Compatibility: This scanner is fully compatible with QR codes, allowing for versatile data capture.
5. Засвар үйлчилгээ
Тохиромжтой засвар үйлчилгээ нь таны бар код сканнерийн урт наслалт, оновчтой ажиллагааг баталгаажуулдаг.
- Сканнердах цонхыг цэвэрлэх: Regularly clean the scanning window with a soft, lint-free cloth. For stubborn smudges, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could scratch the window.
- Ерөнхий цэвэрлэгээ: Wipe the exterior of the scanner with a soft, dry cloth to remove dust and dirt.
- Кабель арчилгаа: USB кабелийг хэт нугалах, мушгихаас зайлсхий, учир нь энэ нь дотоод утсыг гэмтээж болно.
- Хадгалах: Ашиглаагүй үед сканнерыг цэвэр, хуурай орчинд, хэт өндөр температур болон нарны шууд тусгалаас хол хадгална уу.
- Дусалаас зайлсхийх: While designed for durability, avoid dropping the scanner, as impact can damage internal components.
6. Алдаа засах
If you encounter issues with your DIGITUS 2D Barcode Scanner, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Сканнер асахгүй байна. | No power from USB port; loose cable connection. | Ensure USB cable is securely connected to both scanner and host device. Try a different USB port or host device. |
| Сканнер зураасан код уншдаггүй. | Barcode damaged/unreadable; incorrect aiming; scanner not configured for barcode type. | Ensure barcode is clear and undamaged. Aim the scanner correctly. Refer to the QIG for advanced configuration options if specific barcode types are not recognized. |
| Сканнердсан өгөгдөл буруу эсвэл бүрэн бус байна. | Partial scan; software/application issue. | Ensure the entire barcode is within the scanning area. Test with a simple text editor to rule out application-specific issues. |
| Сканнер дуугарах боловч өгөгдөл харагдахгүй байна. | Host device not receiving data; application not in focus. | Ensure the cursor is active in the target input field. Restart the application or host device. |
7. Техникийн үзүүлэлтүүд
Key technical specifications for the DIGITUS 2D Barcode Scanner (Model: DA-81002):
- Бүтээгдэхүүний хэмжээ: 1.1 x 9.7 x 6.5 инч
- Барааны жин: 3.88 унц
- Загварын дугаар: DA-81002
- Үйлдвэрлэгч: ТОНО
- Тохиромжтой төхөөрөмжүүд: Scanner (general purpose)
- Эрчим хүчний эх үүсвэр: Утастай цахилгаан (USB-ээр)
- Холболтын технологи: USB кабель
- Үнэлгээ өгөх: 200 fps (секундэд кадр)
- Баркодын нийцтэй байдал: 1D and 2D barcodes, including QR Code
- Кабелийн урт: 2 meters (USB - RJ45)
8. Баталгаат хугацаа ба дэмжлэг
For warranty information and technical support, please refer to the Quick Installation Guide (QIG) included in your product package or visit the official Digitus webсайт. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.
For further assistance, you may contact Digitus customer support through their official channels. Details are typically provided in the product documentation or on the manufacturer's webсайт.