OOYCYOO 100 Amp MPPT Solar Charge Controller 12V/24V User Manual

1. Танилцуулга

Thank you for choosing the OOYCYOO 100 Amp MPPT Solar Charge Controller. This device is designed to efficiently manage power flow from your solar panels to your battery bank, ensuring optimal charging and system protection. It is compatible with 12V and 24V battery systems and supports various battery types including AGM, Sealed, Gel, Flooded, and Lithium batteries.

2. Аюулгүй ажиллагааны заавар

• Суулгах, ажиллуулахын өмнө бүх зааврыг анхааралтай уншина уу.
• Ensure all wiring is correctly polarized (positive to positive, negative to negative) to prevent damage.
• Always connect the battery to the charge controller first, before connecting solar panels. Disconnect solar panels first, then the battery.
• Use appropriate wire gauges for all connections to handle the rated current.
• Install the controller in a well-ventilated area to prevent overheating.
• Avoid short circuits and reverse polarity connections.
• Хянагчийг өөрөө задлах эсвэл засах гэж бүү оролдоорой. Үйлчилгээ авахын тулд мэргэшсэн ажилтантай холбогдоно уу.

3. Бүтээгдэхүүний онцлог

• MPPT (Maximum Power Point Tracking) technology for efficient solar energy harvesting (≥99% tracking rate, >98% conversion rate).
• Автомат 12V/24V системийн хэмжээtage таних.
• Compatibility with multiple battery types: USER (customizable for Lithium, LiFePO4, Li(NiCoMn)O2), Flooded, Sealed, and Gel batteries.
• User-programmable settings for absorption voltage, хөвөгч ботьtage, мөн бага ботьtage салгах.
• Comprehensive protection features: PV over current/power, PV short circuit, PV reverse polarity, night reverse charging, battery reverse polarity, battery over voltage, battery over discharge, battery overheating, controller overheating, lithium battery low temperature, load short circuit, load overload, TVS high voltage түр зуурын.
• Built-in cooling fan with intelligent temperature control (ON >45℃, OFF <40℃) and porous heat dissipation for extended lifespan.
• Blacklight LCD Display showing charge amount (KWH) and other parameters.
• Max PV input power: 1300W (12V system), 2600W (24V system).
• Хамгийн их PV нээлттэй хэлхээний хэмжээtage: 100VDC.

4. Багцын агуулга

• 1 x OOYCYOO 100A MPPT Solar Charge Controller
• 1 x Температур мэдрэгч
• 1 х хэрэглэгчийн гарын авлага (Англи хэл)

5. Техникийн үзүүлэлтүүд

6. Тохиргоо & Суурилуулалт

6.1. Хайрцаг задлах болон дахин хийхview

Upon unboxing, inspect the charge controller for any visible damage. Familiarize yourself with the device's layout and connection points.

6.2. Холбох

Mount the charge controller vertically on a non-flammable surface in a dry, well-ventilated area, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for proper airflow, especially around the cooling fans.

6.3. Утасны холболт

Follow the wiring sequence carefully to avoid damage to the controller or batteries. The controller accepts up to 6 AWG wire for main power connections. Ensure all connections are tight and secure.

1. Зайны холболт: Connect the battery cables to the BATTERY terminals on the controller first. Ensure correct polarity (positive to positive, negative to negative).
2. Нарны хавтангийн холболт: Connect the solar panel cables to the SOLAR PANEL terminals. Ensure correct polarity.
3. Ачаалах холболт (заавал биш): If using the DC load output, connect your DC loads to the DC LOAD terminals. Ensure correct polarity.
4. Температур мэдрэгч: Plug the included temperature sensor into the designated port. Attach the sensor to the battery for accurate temperature compensation during charging.

For a visual guide on setting up a solar system with a charge controller and inverter, refer to the video below:

6.4. Анхны тохиргоо

After all connections are made, the controller will power on. You may need to configure the battery type and system voltage if it's not automatically detected or if you are using a custom battery type like Lithium.

The controller features a blacklight LCD display for easy monitoring and configuration. Use the buttons to navigate through the menu and adjust settings as needed. For detailed instructions on setting battery parameters, refer to the specific section in the printed user manual.

7. Ашиглалтын заавар

The LCD display provides real-time information about your solar system. Use the navigation buttons (Menu, Up, Down, Enter) to view different parameters and access settings.

7.1. LCD дэлгэцview

The display shows various parameters such as:

• PV Ботьtage ба одоогийн
• Батерейны эзлэхүүнtage and Charging Current
• Ачаалах ботьtage ба одоогийн
• Зайны багтаамж хувьtage
• Орчны температур
• Cumulative Power Generation (KWH)
• Error/Fault Indicators

7.2. Setting Battery Parameters

To optimize charging for your specific battery type, you can adjust parameters like absorption voltage, хөвөх ботьtage, мөн бага ботьtage disconnect. Consult the detailed instructions in the full user manual for precise steps on how to enter the settings menu and modify these values.

7.3. Ачааллын хяналт

The controller features a programmable load timer. You can set the load to turn on/off at specific times or based on battery voltage levels. This feature helps conserve battery power and manage your DC loads efficiently.

8. Засвар үйлчилгээ

• Бүх холболтын битүүмжлэл болон зэврэлтийг тогтмол шалгаж байх.
• Keep the controller's cooling vents clear of dust and debris to ensure proper heat dissipation.
• Батерейны терминалуудыг зэврэлт байгаа эсэхийг үе үе шалгаж, шаардлагатай бол цэвэрлээрэй.
• Monitor the LCD display for any error codes or unusual readings.

9. Алдаа засах

If you encounter issues with your OOYCYOO MPPT Solar Charge Controller, refer to the following general troubleshooting tips:

• Дэлгэцгүй/Цахилгаангүй: Зайны холболтыг шалгаж, зайны цэнэгийг шалгана ууtage нь хамгийн бага үйлдлийн хэмжээнээс дээгүүр байнаtage.
• Цэнэглэхгүй: Verify solar panel connections and ensure sufficient sunlight. Check for any PV over current/short circuit protection activation.
• Battery Over-Discharge: Бага дууны түвшинг тохируулна ууtage disconnect setting if necessary. Ensure your loads are not exceeding the battery's capacity.
• Алдааны кодууд: Тодорхой алдааны кодууд болон тэдгээрийн харгалзах шийдлүүдийн жагсаалтыг бүрэн хэрэглэгчийн гарын авлагаас үзнэ үү.

For issues related to battery activation or if your battery is not working as expected, the following video provides helpful steps:

10. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the OOYCYOO official webсайт. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.