LC-Power LC-35U3-RAID-2 хатуу дискний хайрцаг хэрэглэгчийн гарын авлага

1. Танилцуулга

This manual provides detailed instructions for the installation, configuration, and operation of the LC-Power LC-35U3-RAID-2 Hard Drive Enclosure. This device is designed to house two 3.5-inch SATA hard drives, offering various RAID modes for data management and protection. Please read this manual thoroughly before use to ensure proper setup and functionality.

Figure 1: LC-Power LC-35U3-RAID-2 Hard Drive Enclosure, front-side view with stand.

2. Багцын агуулга

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer.

• 1 x LC-Power LC-35U3-RAID-2 Hard Drive Enclosure
• 1 х тавиур
• 1 x USB Cable (USB-A to USB-A)
• 1 x External Power Supply
• 1 x Mounting Material (screws, screwdriver)
• 1 х хэрэглэгчийн гарын авлага (энэ баримт бичиг)

Figure 2: Product packaging, showing the enclosure and its features.

3. Онцлогууд

• Supports two 8.89cm/3.5" SATA hard drives.
• RAID function support: RAID 0, RAID 1, Large, and Normal modes.
• USB 3.2 Gen 1x1 interface (USB-A connector).
• UASP support for enhanced performance (from Windows 8 onwards).
• Chipset for SATA 5Gb/s (SATA I/II/III).
• Дулааныг үр ашигтайгаар тараах зориулалттай бат бөх хөнгөн цагаан орон сууц.
• Integrated fan controller for adjustable cooling.
• Plug'n'Play functionality.
• Nominal data transfer rate up to 5Gb/s.
• System compatibility: Windows 7 or higher, Mac OS 10.8 or higher.

4. Тохиргоо ба суурилуулалт

4.1. Хатуу диск суурилуулах

1. Хаалтыг нээх: Carefully slide open the enclosure to access the internal drive bays. Refer to the product diagram for the correct opening mechanism.
2. Хатуу диск суулгах: Insert your 3.5-inch SATA hard drives into the designated bays (HDD1 and HDD2). Ensure they are securely seated into the SATA connectors.
3. Secure Drives: Use the provided mounting screws and screwdriver to secure the hard drives within the enclosure.
4. Хаалт хаах: Slide the enclosure cover back into place until it clicks or is firmly closed.

Figure 3: Internal drive tray for 3.5-inch SATA hard drives.

4.2. Connecting to Power and PC

1. Эрчим хүчийг холбох: Connect the external power supply to the DC 12V input port on the enclosure's rear panel. Then, plug the power adapter into a wall outlet.
2. USB холбох: Use the provided USB-A to USB-A cable to connect the enclosure's USB 3.2 Gen 1x1 port to an available USB port on your computer.
3. Байршил: Place the enclosure on a stable surface, preferably using the included stand for optimal airflow and stability.

Зураг 4: Ар талд view of the enclosure, showing the USB port, power input, and fan.

5. RAID тохиргоо

The LC-35U3-RAID-2 supports multiple RAID modes. Before configuring RAID, ensure no critical data is on the installed hard drives, as this process will erase all data.

5.1. Understanding RAID Modes

• Ердийн: Each hard drive operates independently as a separate volume.
• Large (JBOD): Combines both hard drives into a single, large volume. Data is written sequentially across drives. No redundancy.
• RAID 0 (Зураг зурах): Combines both hard drives into a single volume for maximum performance. Data is split and written across both drives simultaneously. No redundancy; failure of one drive results in data loss.
• RAID 1 (Толь тусгах): Creates an exact copy of data on both hard drives. Provides data redundancy; if one drive fails, data can be recovered from the other. Capacity is limited to the size of the smallest drive.

5.2. Setting RAID Mode

1. Унтраах: Ensure the enclosure is powered off and disconnected from your computer.
2. DIP шилжүүлэгчийг тохируулах: On the rear panel, locate the RAID setting DIP switches. Adjust these switches according to the desired RAID mode as indicated on the enclosure. Refer to Figure 5 for switch positions.
3. Дахин тохируулах товчийг дарна уу: With the enclosure still powered off, use a small pointed object (like a paperclip) to press and hold the "RESET" button.
4. Асаах: While holding the RESET button, power on the enclosure. Continue holding the RESET button for approximately 5-10 seconds until the indicator lights change or flash, then release.
5. Компьютерт холбогдох: Connect the enclosure to your computer via USB.
6. Анхааруулга болон форматлах: For new RAID configurations or drives, you will need to initialize and format the new volume through your operating system's Disk Management utility (Windows) or Disk Utility (Mac OS). Follow your OS's instructions for creating new partitions and formatting.

Зураг 5: Нарийвчилсан view of the rear panel, highlighting RAID setting DIP switches and the RESET button.

Figure 6: Top panel indicators for HDD activity and RAID mode labels.

6. Үйл ажиллагаа

6.1. Асаах/унтраах

After connecting the power and USB cables, press the "ON/OFF" switch on the rear panel to power on the enclosure. The power indicator light will illuminate. To power off, press the switch again. Always safely eject the drive from your operating system before powering off to prevent data corruption.

6.2. Сэнсний удирдлага

The enclosure features a fan with adjustable speed settings. Use the fan control switch on the rear panel to select your desired fan speed (low, medium, high) or turn it off. Adjust the fan speed based on the operating temperature of your hard drives and ambient conditions.

6.3. Drive Activity Indicators

The enclosure has LED indicators for HDD1 and HDD2 on the top panel. These lights will illuminate when the respective drive is active (reading or writing data).

6.4. Системийн нийцтэй байдал

The LC-35U3-RAID-2 is compatible with Windows 7 or higher and Mac OS 10.8 or higher. For optimal performance and UASP support, ensure your operating system is Windows 8 or newer.

7. Засвар үйлчилгээ

• Цэвэрлэгээ: Use a soft, dry cloth to clean the exterior of the enclosure. Do not use liquid cleaners or solvents. Ensure ventilation holes are free from dust to maintain proper airflow.
• Агааржуулалт: Ensure the enclosure is placed in a well-ventilated area, away from direct sunlight or heat sources, to prevent overheating.
• Кабелийн менежмент: Periodically check all cable connections (power and USB) to ensure they are secure and not damaged. A loose USB cable can lead to connection drops.
• Програм хангамжийн шинэчлэлтүүд: Check the LC-Power website periodically for any available firmware updates for your device.

8. Алдаа засах

• Enclosure not recognized by PC:
  • Цахилгаан адаптер найдвартай холбогдсон бөгөөд хайрцаг асаалттай байгаа эсэхийг шалгаарай.
  • Verify the USB cable is firmly connected to both the enclosure and the computer. Try a different USB port or cable.
  • Check your operating system's Disk Management (Windows) or Disk Utility (Mac OS) to see if the drives are detected but uninitialized or unformatted.
  • If you changed RAID modes, ensure you performed the RESET procedure correctly and initialized/formatted the volume.
• Өгөгдөл дамжуулах хурд удаан:
  • Ensure you are connected to a USB 3.0/3.1/3.2 port on your computer for optimal speeds.
  • Verify that UASP is enabled (Windows 8 or higher).
  • Check the health of your hard drives.
• Drives not spinning up or making unusual noises:
  • Цахилгаан хангамж зөв ажиллаж байгаа эсэхийг шалгаарай.
  • Check that the hard drives are properly seated in their bays.
  • If noises persist, the hard drive itself may be faulty.
• Intermittent connection drops:
  • Ensure the USB cable is not loose or damaged. Try a different, high-quality USB-A to USB-A cable.
  • Хүчтэй цахилгаан соронзон хөндлөнгийн эх үүсвэрийн ойролцоо хаалт байрлуулахаас зайлсхий.
• Auto-Sleep function not working as expected:
  • Ensure your operating system's power management settings are not interfering with the enclosure's sleep function.
  • Some operating systems (e.g., certain Linux distributions) may have limited or no support for the enclosure's auto-sleep feature.

9. Техникийн үзүүлэлтүүд

10. Баталгаат хугацаа ба дэмжлэг

LC-Power products are designed and manufactured to the highest quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official LC-Power webсайт.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact LC-Power customer service through their official webсайт эсвэл таны бүтээгдэхүүний баримт бичигт заасан холбоо барих мэдээлэл.

Үйлдвэрлэгч: LC-Power
Webсайт: www.lc-power.com (Хамгийн сүүлийн үеийн холбоо барих мэдээлэл болон дэмжлэгийн эх сурвалжуудыг шалгана уу.)