Myatu MYT-26 Electric Mountain Bike User Manual

1. Танилцуулга ба аюулгүй байдлын мэдээлэл

Thank you for choosing the Myatu MYT-26 Electric Mountain Bike. This manual provides essential information for the safe assembly, operation, and maintenance of your e-bike. Please read this manual thoroughly before your first ride and retain it for future reference. Always prioritize safety by wearing a helmet and appropriate protective gear, and adhere to all local traffic laws and regulations.

Аюулгүй байдлын чухал анхааруулга:

• Унахдаа хамгаалалтын малгай, хамгаалалтын хэрэгслийг үргэлж өмс.
• Ensure all components are correctly assembled and secured before each ride.
• Regularly check tire pressure, brake function, and battery charge.
• Согтууруулах ундаа, мансууруулах бодисын нөлөөн дор цахим дугуйг ажиллуулж болохгүй.
• Эргэн тойрондоо анхаарал хандуулж, хамгаалалтанд ав.
• Avoid riding in adverse weather conditions or on excessively rough terrain if you are not experienced.

2. Багцын агуулга

Савлагааг задлахдаа дараах бүх зүйлс таны багцад байгаа эсэхийг шалгана уу.

• Myatu MYT-26 Electric Mountain Bike (partially assembled)
• Зай цэнэглэгч
• Суулгах хэрэгслийн багц
• Хэрэглэгчийн зааварчилгааны гарын авлага (энэ баримт бичиг)

If any items are missing or damaged, please contact Myatu customer support immediately.

3. Тохиргоо ба угсралт

Your Myatu MYT-26 e-bike comes partially assembled. The following steps outline the general assembly process. Refer to the detailed diagrams and instructions provided in the included installation tool kit for specific guidance.

1. Савлах: Carefully remove all components from the packaging. Retain packaging materials for potential future transport or returns.
2. Урд дугуй суурилуулах: Attach the front wheel to the fork, ensuring the disc brake rotor aligns correctly with the caliper. Secure the quick-release skewer or axle nuts firmly.
3. Бариул суурилуулах: Mount the handlebar onto the stem, ensuring it is centered and the brake levers and shifters are in a comfortable position. Tighten all bolts securely.
4. Суудлын тулгуур ба эмээл суурилуулах: Insert the seat post into the frame's seat tube. Adjust the saddle height to a comfortable and safe riding position, then tighten the quick-release lever or bolt.
5. Дөрөө суурилуулах: Identify the left (L) and right (R) pedals. The left pedal threads counter-clockwise, and the right pedal threads clockwise. Apply a small amount of grease to the threads and tighten them securely with a wrench.
6. Батерей суурилуулах: If the battery is not pre-installed, slide it into its designated slot on the frame and lock it into place using the provided key.
7. Аяллын өмнөх шалгалт: Before your first ride, double-check all bolts, nuts, and quick releases for tightness. Ensure brakes are functioning correctly and tires are inflated to the recommended pressure.

4. Бүрэлдэхүүн хэсгүүд дууссанview

Familiarize yourself with the main components of your Myatu MYT-26 e-bike:

• Хүрээ: Durable aluminum alloy frame.
• Дугуй: 26-inch wheels suitable for mountain biking.
• Мотор: 250W rear hub motor for electric assistance.
• Зай: Removable 36V 12.5Ah Lithium battery, integrated into the frame.
• Display/Controller: Handlebar-mounted unit to control power, assist levels, and view ride data.
• Араа: Shimano 7-speed derailleur system for varied terrain.
• Тоормос: Front and rear mechanical disc brakes for reliable stopping power.
• Түдгэлзүүлэх: Цочролыг шингээх урд түдгэлзүүлэлтийн сэрээ.

5. Зайны мэдээлэл

The Myatu MYT-26 is equipped with a high-capacity lithium-ion battery. Proper care and charging are crucial for its longevity and performance.

Зайны үзүүлэлтүүд:

• Төрөл: 36V 12.5Ah лити-ион
• Салдаг: Yes, for convenient charging and security.
• Цэнэглэх хугацаа: Бүрэн цэнэглэхэд ойролцоогоор 4-6 цаг зарцуулна.
• Циклийн амьдрал: Rated for approximately 500 charge cycles.
• Хүрээ: Up to 50 miles (80 km) on pedal-assist mode, depending on terrain, rider weight, and assist level.

Батерейг цэнэглэж байна:

1. Ensure the e-bike is turned off.
2. The battery can be charged while installed on the bike or removed. To remove, unlock it with the key and slide it out.
3. Цэнэглэгчийг батерейны цэнэглэх порт руу холбоно уу.
4. Цэнэглэгчийг ердийн цахилгаан залгуурт холбоно уу.
5. Цэнэглэгчийн заагч гэрэл нь ихэвчлэн цэнэглэх үед улаан болж, бүрэн цэнэглэгдсэн үед ногоон өнгөтэй болдог.
6. Once fully charged, disconnect the charger from the outlet first, then from the battery.

Батерейны арчилгаа:

• Батерейг бүрэн дуусгахаас зайлсхий. Байнга ашиглаагүй байсан ч тогтмол цэнэглээрэй.
• Зайг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.
• Зайг ус, чийгэнд бүү тавь.
• Use only the original Myatu charger provided with your e-bike.

6. Ашиглалтын заавар

Асаах/унтраах:

To power on the e-bike, press and hold the power button on the handlebar control panel (refer to Figure 4.1). The display will illuminate. To power off, press and hold the same button until the display turns off.

Дөрөө туслах систем (PAS):

The Myatu MYT-26 features a pedal-assist system that provides motor power as you pedal. Use the '+' and '-' buttons on the control panel to select your desired assist level. Higher levels provide more motor assistance, while lower levels conserve battery life.

Араа солих:

Your e-bike is equipped with a Shimano 7-speed gear system. Use the shifter on the right handlebar to change gears. Shift to lower gears for easier pedaling on inclines and higher gears for faster speeds on flat terrain. Always ease off the pedals slightly when shifting to ensure smooth transitions.

Тоормослох:

The e-bike features front and rear mechanical disc brakes. The left lever controls the front brake, and the right lever controls the rear brake. Apply both brakes simultaneously and smoothly for effective stopping. Avoid sudden, hard braking, especially with the front brake, to prevent loss of control.

7. Засвар үйлчилгээ

Regular maintenance is essential to ensure the safety, performance, and longevity of your Myatu MYT-26 e-bike.

Routine Checks (Before Each Ride):

• Дугуй: Check tire pressure and inspect for any cuts or punctures.
• Тоормос: Ensure brake levers are firm and responsive, and brake pads are not excessively worn.
• Боолт ба бэхэлгээ: Verify all critical bolts (handlebars, stem, seat post, wheels) are tight.
• Зай: Зайны цэнэгийн түвшинг шалгана уу.

Regular Maintenance (Weekly/Monthly):

• Цэвэрлэгээ: Зар сурталчилгаагаар дугуйгаа тогтмол цэвэрлэamp cloth. Avoid high-pressure washing, especially near electrical components.
• Гинж: Clean and lubricate the chain regularly, especially after riding in wet or dusty conditions.
• Тоормосны дэвсгэр: Тоормосны дэвсгэр элэгдэж байгаа эсэхийг шалгаж, шаардлагатай бол солино уу.
• Араа: Check gear shifting for smoothness and adjust if needed.
• Зайны терминалууд: Keep battery terminals clean and dry.

For complex repairs or adjustments, it is recommended to consult a professional bicycle mechanic.

8. Алдаа засах

This section addresses common issues you might encounter with your Myatu MYT-26 e-bike. For problems not listed here, please contact customer support.

9. Техникийн үзүүлэлтүүд

Detailed technical specifications for the Myatu MYT-26 Electric Mountain Bike:

10. Баталгаат хугацаа ба дэмжлэг

Myatu provides a limited warranty for its products. Please refer to the warranty card included with your purchase or visit the official Myatu website for detailed warranty terms and conditions. For technical support, spare parts, or any inquiries regarding your Myatu MYT-26 Electric Mountain Bike, please contact Myatu customer service through the contact information provided on the official webсайт эсвэл таны худалдан авалтын баримт бичиг.

When contacting support, please have your model number (MYT-26) and proof of purchase readily available.