CONTEC CMS50Q1 Fingertip Pulse Oximeter User Manual

1. Танилцуулга

The CONTEC CMS50Q1 Fingertip Pulse Oximeter is a portable, non-invasive device designed for spot-checking of oxygen saturation (SpO2) and pulse rate (PR) through the finger. It is specifically designed for individuals with small fingers, such as children, and is suitable for sports and aviation use. This device is not intended for medical diagnosis or treatment.

Important Note: This device is for Sports or Aviation use only and is not a medical device. Consult a healthcare professional for any medical concerns.

2. Бүтээгдэхүүн дууссанview

2.1 Гол онцлогууд

• Small Finger Design: Specifically designed to fit finger diameters greater than 0.2 inch (5mm), making it suitable for children.
• Accurate & Fast Results: Provides quick and precise measurements of SpO2 and pulse rate.
• Дэлгэцийг арилгах: Features a digital rotatable TFT display showing SpO2 value, pulse rate value, bar graph, and pulse waveform.
• Хялбар ажиллагаа: Simple one-button operation for power on and measurement.
• Тав тухтай дизайн: Fingertip clip made with silica gel material for comfort.
• Батерейны урт наслалт: Offers 20-30 hours of battery life with automatic power-off after 5 seconds of inactivity.

2.2 Хайрцагт юу байгаа вэ

• CONTEC CMS50Q1 Pulse Oximeter (Main Unit)
• оосор
• Хэрэглэгчийн гарын авлага
• Cartoon Stickers
• Халив (батерейны тасалгаанд зориулагдсан)

2.3 Бүтээгдэхүүний бүрэлдэхүүн хэсгүүд

This image illustrates the various parts of the CMS50Q1 Pulse Oximeter, including the display elements and physical features like the lanyard loop hole and battery cover.

3. Тохиргоо

3.1 Батерей суурилуулах

1. Locate the battery compartment on the back of the oximeter.
2. Батерейны таг дээрх боолтыг суллахын тулд өгөгдсөн халивыг ашиглана уу.
3. Зайны тагийг гулсуулна уу.
4. Хоёр AAA батерейг (оруулаагүй) тасалгаанд хийж, зөв ​​туйлшралыг (+/-) баталгаажуулна.
5. Replace the battery cover and secure it with the screw using the screwdriver. This screw helps prevent accidental battery access, especially for children.

This image demonstrates the battery installation process and subsequent steps for taking a measurement.

3.2 оосорыг бэхлэх

Thread the thin loop of the lanyard through the lanyard loop hole on the oximeter. Then, pass the larger part of the lanyard through the thin loop and pull gently to secure it. This allows for convenient carrying.

This image shows the device dimensions and how to attach the included lanyard.

4. Ашиглалтын заавар

4.1 Хэмжилт хийх

1. Ensure the oximeter has batteries installed.
2. Open the clip of the oximeter.
3. Insert one of your fingers (preferably the index finger) into the rubber opening of the oximeter, ensuring the finger is placed correctly and fully inside. The device is designed for finger diameters greater than 0.2 inch (5mm).
4. Press the power button once to turn on the oximeter.
5. Keep your hand still and avoid movement during the measurement.
6. The SpO2 and pulse rate readings will appear on the display within a few seconds.

4.2 Дэлгэцийн чиглэл

The display of the CMS50Q1 Pulse Oximeter can rotate automatically to provide optimal viewing from different angles. Simply adjust the device's orientation, and the display will adapt.

This image demonstrates the rotatable display feature of the oximeter.

4.3 Автомат унтраалт

The device will automatically power off after approximately 5 seconds of inactivity (when no finger is detected) to conserve battery life.

5. Мэдээллийг харуулах

The TFT display provides the following information:

• SpO2 (%): Blood Oxygen Saturation level.
• PRbpm: Зүрхний цохилтын хурд минутанд цохилтоор.
• Бар график: A visual representation of pulse strength.
• Pulse Waveform: A graphical representation of the pulse.
• Батерей багатай үзүүлэлт: An icon indicating when batteries need replacement.

This image shows a typical display reading with SpO2, PRbpm, and the pulse waveform.

6. Засвар үйлчилгээ, арчилгаа

6.1 Cleaning the Oximeter

• Clean the surface of the oximeter before and after each use with a soft cloth dampэмнэлгийн спиртээр (70% этанол эсвэл изопропанол) ариутгасан.
• Do not immerse the device in water or other cleaning solutions.
• Дахин ашиглахаасаа өмнө төхөөрөмжийг бүрэн хуурай байгаа эсэхийг шалгаарай.

6.2 Батерейг солих

When the low battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps in Section 3.1.

6.3 Хадгалалт

Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage.

7. Алдаа засах

8. Техникийн үзүүлэлтүүд

• Бүтээгдэхүүний хэмжээ: 2.32 x 1.42 x 1.38 инч
• Барааны жин: 3.52 унц
• Measuring Range SpO2: 70-100%
• Measuring Range Pulse Rate: 0-250 цохилт
• Зайны хугацаа: Ойролцоогоор 20-30 цаг
• Эрчим хүчний эх үүсвэр: 2 x AAA батерей (оруулаагүй)
• Автомат унтрах: 5 секундын идэвхгүй байдлын дараа
• Үйлдвэрлэгч: Contec Medical Systems Co.,Ltd

9. Аюулгүй байдлын мэдээлэл

• This device is intended for sports and aviation use only. It is not a medical device and should not be used for medical diagnosis or treatment.
• Do not use the oximeter during sports activities, as movement can affect accuracy.
• Keep the device out of reach of small children to prevent choking hazards from small parts like batteries or the lanyard.
• Avoid exposing the device to direct sunlight, high temperatures, or moisture.
• Do not attempt to repair or modify the device yourself. Contact support if issues arise.

10. Туслах мэдээлэл

For technical support or inquiries regarding your CONTEC CMS50Q1 Pulse Oximeter, please contact the manufacturer using the details below:

• Техникийн тусламжийн утас: +86-335-8015431
• Имэйл: contecmed@contecmed.com.cn
• Webсайт: http://www.contecmed.com

Please refer to the official CONTEC webсайт эсвэл таны худалдан авалтын баримт бичгийг баталгаат тодорхой нөхцлүүд.