DieseRC Smart Roller Shutter Controller Module User Manual

1. Танилцуулга

The DieseRC Smart Roller Shutter Controller Module is designed to upgrade traditional roller shutter switches, enabling smart control via APP, 433MHz RF remote control, and manual switch operation. This module integrates seamlessly into your smart home ecosystem, offering convenience and enhanced control for your roller shutters, awnings, or AC motors.

Image: The DieseRC Smart Roller Shutter Controller Module and its accompanying remote control.

2. Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгана уу:

• 1x WIFI Control Module
• 1x RF алсын удирдлага
• 1x Бүтээгдэхүүний гарын авлага (энэ баримт бичиг)

3. Техникийн үзүүлэлтүүд

WIFI Control Module Parameters:

Remote Control Parameters:

4. Тохиргоо

4.1 Холболтын схем

The module supports both 4-wire and 5-wire AC motors. Ensure proper wiring for safe and correct operation. The module can be hidden in most electrical boxes or junction boxes.

Image: Wiring diagrams showing connections for the module with and without a traditional panel switch. The top diagram shows connection with a panel switch, and the bottom diagram shows connection without a panel switch, both for AC 100V~240V and an AC motor.

Жич: This module is compatible with 4-wire motors (2 input phase wires, 1 neutral wire, and 1 ground wire) and 5-wire motors with an integrated drive unit. No additional wiring is required for the module itself once installed correctly.

4.2 APP Pairing (Tuya / Smart Life)

Follow these steps to pair the module with the Tuya or Smart Life application:

1. Ensure your phone is connected to a 2.4 GHz Wi-Fi network and Bluetooth is enabled.
2. Power on the WIFI curtain module. The blue indicator light should blink, indicating it is automatically in "Network Pairing Mode".
   • If the blue indicator light is not blinking, reset the device: Press and hold the learning button on the WIFI curtain module for approximately 10 seconds until the blue indicator light blinks. This confirms the device is in "Network Pairing State".
3. Open the "Tuya" or "Smart Life" APP on your phone.
4. The WIFI curtain module icon should appear on the APP interface. Follow the instructions on the APP interface to complete the pairing.
   • If the icon does not appear, click "Add Device" and select the "Curtain Module" icon.

Image: A smartphone displaying the Tuya/Smart Life app interface for controlling the roller shutter module, showing "Open" and "Closed" options, with a background of a beach and a window with curtains.

4.3 RF Signal Pairing

To pair the RF remote control with the module:

1. Press the learning button on the curtain module once.
2. Press the first button on the remote control. Pairing is successful.

Image: Diagram illustrating the RF signal pairing process. Step 1 shows pressing the learning button on the module once. Step 2 shows pressing the first button on the remote control to complete pairing.

5. Ашиглалтын заавар

5.1 Хяналтын аргууд

The DieseRC Smart Roller Shutter Controller Module offers three control methods:

• APP хяналт: Use the Tuya or Smart Life app on your smartphone (Android and iOS) to control the roller shutters from anywhere with an internet connection.
• RF алсын удирдлага: Utilize the included 433MHz RF remote control for local operation within a range of approximately 30-50 meters indoors.
• Гараар шилжүүлэгч: Continue to use your traditional wall switch for direct control.

Image: A collage showing the multiple control modes: APP control via smartphone, RF remote control, manual panel switch, and voice control via Alexa/Google Home.

5.2 Дуут удирдлага (Alexa / Google Home)

The WIFI switch is compatible with Amazon Alexa (Amazon Echo / Dot / Spot) and Google Home, allowing for voice commands. Ensure your device is properly linked within the Tuya/Smart Life app to your voice assistant.

Example тушаалууд:

• "Alexa, open the curtain."
• "Hey Google, close the roller shutter."
• "Alexa, set the curtain to 50%."

Image: A scene depicting voice control functionality, with a woman and child interacting with an Amazon Echo and Google Home device, and a speech bubble showing "Alexa, open the curtains!".

5.3 хувьtage Control and Timer Function

The APP provides advanced control features:

• Персенtage функц: Adjust the roller shutter to a specific percentage (жишээлбэл, 50% нээлттэй).
• Таймер функц: Set schedules for automatic opening and closing of your roller shutters.
• Limited Movement Setting: Configure the movement length from bottom to top to ensure the motor automatically stops at the desired end position.

Image: A smartphone screen showing the app interface with a slider for percentage control of a curtain, ranging from 0% to 100%, with a background of a bedroom with roller blinds.

6. Засвар үйлчилгээ

• Цэвэрлэгээ: Use a dry, soft cloth to clean the module and remote control. Do not use liquid cleaners or aerosols.
• Зай солих (Алсын удирдлага): The remote control uses a 27A 12V battery. The battery can be replaced after disassembling the remote. The battery typically lasts about 3 years.
• Релений ашиглалтын хугацаа: The high-quality relay in the WIFI switch is designed for over 400,000 operations.
• Байгаль орчны нөхцөл: Operate the module within the specified temperature range of -30°C to +80°C. Avoid exposure to extreme moisture or direct sunlight.

7. Алдаа засах

7.1 Нийтлэг асуудал ба шийдвэрлэх арга замууд

• Module not entering pairing mode (blue light not blinking):

  Шийдэл: Press and hold the learning button on the WIFI curtain module for approximately 10 seconds until the blue indicator light blinks. This will reset the device and put it into "Network Pairing State".
• APP төхөөрөмжийг олж чадахгүй байна:

  Шийдэл: Ensure your phone is connected to a 2.4 GHz Wi-Fi network and Bluetooth is enabled. Make sure the module is in pairing mode (blue light blinking). If still not found, try restarting the APP or your phone. You may also need to manually add the device by clicking "Add Device" and selecting "Curtain Module" in the Tuya/Smart Life APP.

• RF remote control not working:

  Шийдэл: Ensure the remote control battery (27A 12V) is not depleted. Re-attempt RF signal pairing as described in Section 4.3. If the issue persists, clear the RF signal memory (see Section 7.2) and re-pair.

• Дуут удирдлага хариу өгөхгүй байна:

  Шийдэл: Verify that the module is successfully paired with the Tuya/Smart Life APP and that the APP is linked to your Amazon Alexa or Google Home account. Check your internet connection and ensure your voice assistant device is online.
• Motor not responding or moving incorrectly:

  Шийдэл: Check all wiring connections to ensure they are secure and correct according to the diagram in Section 4.1. Ensure the motor type (4-wire or 5-wire with integrated drive) is compatible. If using percentage control, verify the limited movement settings in the APP.

7.2 Clearing RF Signal Memory

To clear all paired RF remote controls from the module's memory:

1. Press the learning button on the module 8 times.
2. The data will be cleaned successfully. You can then re-pair any remote controls as needed.

Image: Diagram illustrating the RF signal clearing process. It shows pressing the learning button on the module 8 times to successfully clear the stored data.

8. Баталгаат хугацаа ба дэмжлэг

DieseRC products are designed for reliability and performance. For warranty information or technical support, please refer to the seller's policy or contact DieseRC customer service directly. Contact information can typically be found on the product packaging or the official DieseRC webсайт.