BTF-LIGHTING RC03RFB+2XC04RF

BTF-LIGHTING 2.4GHz Wireless RF Remote RC03RFB & C04RF Tuya Controller Kit User Manual

Model: RC03RFB+2XC04RF

1. Бүтээгдэхүүн дууссанview

This kit includes the BTF-LIGHTING 2.4GHz Wireless RF Remote (RC03RFB) and two C04RF Tuya Controllers, designed for controlling RGBW LED strips. It supports 4-zone group control and can be integrated with Tuya Smart Life APP via a GW01W Tuya Gateway (sold separately) for smart home compatibility.

BTF-LIGHTING 2.4GHz RF Remote and C04RF LED Controller Kit

Зураг 1.1: Дууслааview of the 2.4GHz RF Remote and C04RF LED Controller Kit components.

Видео 1.1: Албан тушаалтан дууссанview of the BTF-LIGHTING 2.4GHz RF LED Controller Series, demonstrating compatibility and basic functions.

2. Тохируулах заавар

2.1 Багцын агуулга

  • 1x RC03RFB Remote Control
  • 2x C04RF Tuya Controllers
  • 1x RF Remote Bracket
  • 2х шураг
  • 1x Double-sided Adhesive

Note: AAA batteries for the remote and the GW01W Tuya Gateway are not included and must be purchased separately.

2.2 Цахилгаан хангамжид тавигдах шаардлага

The C04RF Tuya Controller supports DC5V, DC12V, and DC24V input. Ensure your power supply matches the voltage requirements of your LED strip. The maximum allowable current through the two power interfaces of the controller is 5A and 12A respectively.

Controller with two power interfaces

Image 2.1: The C04RF controller features two power input interfaces, supporting DC12V or DC24V. The 5.5mm x 2.1mm DC power jack input voltage equals the output voltage.

2.3 Холболтын схем

Connect your RGBW LED strip to the C04RF controller according to the wiring diagram. Ensure correct polarity and connection of the R, G, B, W, and V+ wires.

  • V+: Positive power connection.
  • R: Red channel output.
  • G: Green channel output.
  • B: Blue channel output.
  • W: White channel output.
Wiring diagram for C04RF RGBW LED Controller

Image 2.2: Detailed wiring diagram showing how to connect the power supply and RGBW LED strip to the C04RF controller.

2.4 Controller Pairing (Remote Control)

To pair the RC03RFB remote with a C04RF controller:

  1. Хянагч унтарсан эсэхийг шалгаарай.
  2. Хянагчийг асаана уу.
  3. Within 3 seconds of powering on, press one of the Zone ON buttons (1, 2, 3, or 4) on the remote control.
  4. The connected LED strip will flash three times to indicate successful pairing.

To unpair a controller from a zone:

  1. Хянагч унтарсан эсэхийг шалгаарай.
  2. Хянагчийг асаана уу.
  3. Within 3 seconds of powering on, press the corresponding Zone OFF button (1, 2, 3, or 4) five times.
  4. The connected LED strip will flash ten times to indicate successful unpairing.

3. Ашиглалтын заавар

3.1 Remote Control Functions (RC03RFB)

The RC03RFB remote control features a touch color wheel and various buttons for comprehensive control of your LED strips.

RC03RFB Remote Control and C04RF Controller Diagram

Image 3.1: Diagram illustrating the buttons and functions of the RC03RFB remote control and the C04RF controller.

  • ON/OFF: Master power control for all paired zones.
  • Өнгөт бөгж: Touch to select desired color (16 million colors).
  • Нисгэгч Лamp: Indicates remote activity.
  • Динамик горимууд: Урьдчилан програмчлагдсан гэрэлтүүлгийн янз бүрийн эффектүүдээр дамжуулан ээлжлэн солино уу.
  • Гэрэлтүүлэг +/-: Гэрэлтүүлгийн түвшинг тохируулна уу.
  • 7 Colors Switching: Quickly switch between 7 primary colors.
  • Color Temp/Saturation: Adjust color temperature for white light or saturation for RGB colors.
  • White Light (W): Activate pure white light.
  • Хурд +/-: Динамик горимуудын хурдыг тохируулна уу.
  • Бүс ON/OFF (1-4): Turn individual zones on or off.
  • Шөнийн гэрлийн горим: Activates a low-brightness white light.

3.2 Бүлгийн хяналт

The RC03RFB remote supports 4-zone group control, allowing you to manage multiple controllers independently or together. Each remote can be matched with one or more controllers per zone.

4-Zone Group Control illustration

Image 3.2: Illustration of 4-zone group control, demonstrating how different areas can be controlled independently.

The controllers feature an auto-transmitting function. One controller can transmit signals from the remote to another controller within 30 meters (98 feet), extending the effective control distance.

Auto-Transmitting Function diagram

Image 3.3: Diagram explaining the auto-transmitting function, where controllers relay signals to extend the control range.

3.3 App Control (Requires GW01W Tuya Gateway)

For advanced control features, including voice control with Alexa and Google Home, timer settings, device sharing, and automation, a GW01W Wi-Fi+Bluetooth Dual Mode Tuya Gateway is required (not included).

Smartphone app control and third-party voice control compatibility

Image 3.4: The system supports smartphone app control and third-party voice control when connected to a Tuya Gateway.

Steps to Control LED Strip through APP:

  1. Power Your Light Sources: LED туузыг цахилгаан тэжээлд холбоно.
  2. Power the GW01W Tuya Gateway: Install the gateway within 30m of the lights and near your WiFi router.
  3. Download Smart Life or Tuya Smart App & Connect to Gateway: Create an account, add the device, select the device working WiFi, and enter the password. Ensure the gateway indicator shows blue light (Linking). Connection is successful when the light shows green.
  4. Link the Lights or Controller to GW01W Gateway: Switch off the lights you want to link, then switch them on again. Press the "SET" button on the 2.4G gateway once within 5 seconds. The lights will blink 3 times slowly, indicating successful linking.
How to control LED strip through app with Tuya Gateway

Image 3.5: Step-by-step guide on how to connect and control your LED strip using the Smart Life or Tuya Smart app via the GW01W Tuya Gateway.

4. Засвар үйлчилгээ

To ensure optimal performance and longevity of your BTF-LIGHTING controller kit, follow these maintenance guidelines:

  • Цэвэрлэгээ: Use a soft, dry cloth to clean the remote control and controllers. Avoid using abrasive cleaners or solvents.
  • Зай солих: The RC03RFB remote control uses AAA batteries. Replace them when the remote's response becomes sluggish or inconsistent. Ensure correct polarity when inserting new batteries.
  • Байгаль орчин: Keep the controllers and remote away from excessive moisture, extreme temperatures, and direct sunlight.

5. Алдаа засах

If you encounter issues with your BTF-LIGHTING controller kit, refer to the following common problems and solutions:

  • LED Strip Not Responding to Remote:
    • Check if the remote's batteries are depleted and replace them if necessary.
    • Ensure the controller is powered on and the LED strip is correctly connected.
    • Re-pair the remote control with the controller following the instructions in Section 2.4.
    • Verify that the remote is within the 30-meter (98 feet) control range of the controller.
  • Incorrect Colors or Flickering:
    • Check the wiring connections between the LED strip and the controller for any loose or incorrect connections (R, G, B, W, V+).
    • Эрчим хүчний хангамжийн хэмжээг баталгаажуулна ууtage matches the LED strip's requirements.
  • Аппликейшний удирдлага ажиллахгүй байна:
    • Confirm that the GW01W Tuya Gateway is properly set up and connected to your home Wi-Fi network.
    • Ensure the controller is successfully linked to the Tuya Gateway (refer to Section 3.3).
    • Check your Wi-Fi signal strength and ensure the gateway is within range of both the router and the controllers.
  • Remote Control Color Wheel is Too Sensitive:
    • This is a known characteristic of the touch wheel design. Exercise care when adjusting colors to achieve the desired shade.

6. Техникийн үзүүлэлтүүд

ОнцлогТодорхойлолт
БрэндBTF-ГЭРЭЛТҮҮЛЭГ
Загварын нэрRC03RFB+2XC04RF
Загварын дугаарRC03RFB-C04RF
Холболтын технологиРадио давтамж (2.4GHz)
Хянагчийн төрөлТовчлуурын удирдлага
Тохиромжтой төхөөрөмжүүд5050SMD, 3528SMD, 5630SMD RGBW FCOB COB LED strips (5-wire)
Ботьtage ДэмжлэгDC5V, DC12V, DC24V
Max Output Current (Controller)5A and 12A (two power interfaces)
Хамгийн их хүрээ98 Фут (30 метр)
Бүлгийн хяналт4 бүс
Алсын зайны төрөлAAA (not included)
Зүйлийн жин0.17 кг

7. Баталгаат хугацааны мэдээлэл

BTF-LIGHTING products are manufactured to high-quality standards. For specific warranty details, please refer to the product packaging or contact BTF-LIGHTING customer support. Keep your purchase receipt as proof of purchase for any warranty claims.

8. Хэрэглэгчийн дэмжлэг

For technical assistance, troubleshooting, or product inquiries, please contact BTF-LIGHTING customer support through the retailer's platform or visit the official BTF-LIGHTING webхолбоо барих мэдээлэл авах сайт.

Холбогдох баримт бичиг - RC03RFB+2XC04RF

Урьдчилсанview BTF-LIGHTING 5050 SMD RGBW LED зурвас хэрэглэгчийн гарын авлага
User manual for the BTF-LIGHTING 5050 SMD RGBW LED Strip, detailing product parameters, installation, precautions, and troubleshooting for optimal lighting solutions.
Урьдчилсанview FCOB SPI RGBW LED Strip User Manual | Installation and Operation Guide
User manual for the FCOB SPI RGBW LED Strip, covering product specifications, precautions, installation guides, and connection diagrams for various controllers and power supplies.
Урьдчилсанview BTF-LGHTING FCOB SPI RGBW LED Strip хэрэглэгчийн гарын авлага
BTF-LGHTING FCOB SPI RGBW LED Strip-ийн хэрэглэгчийн гарын авлагад бүтээгдэхүүний параметрүүд, суурилуулалт, урьдчилан сэргийлэх арга хэмжээ, оновчтой ашиглахад санал болгож буй дагалдах хэрэгслүүдийн талаар дэлгэрэнгүй бичсэн болно.
Урьдчилсанview BTF-LIGHTING FCOB PWM RGBW LED зурвасын хэрэглэгчийн гарын авлага
Comprehensive user manual for BTF-LIGHTING FCOB PWM RGBW LED Strip, covering product parameters, installation, precautions, controller compatibility, and technical specifications.
Урьдчилсанview BTF-LGHTING FCOB PWM RGBW LED зурвас хэрэглэгчийн гарын авлага
BTF-LGHTING FCOB PWM RGBW LED туузны хэрэглэгчийн гарын авлага нь олон талт гэрэлтүүлгийн хэрэглээнд зориулсан бүтээгдэхүүний параметрүүд, урьдчилан сэргийлэх арга хэмжээ, хянагчийн нийцтэй байдал, суурилуулах зааврыг нарийвчлан тусгасан болно.
Урьдчилсанview BTF-LGHTING WS2814 IC RGBW хаягтай LED зурвас хэрэглэгчийн гарын авлага
Энэхүү хэрэглэгчийн гарын авлага нь BTF-LIGHTING WS2814 IC RGBW хаягтай LED зурвасын тухай дэлгэрэнгүй мэдээллийг агуулсан бөгөөд үүнд бүтээгдэхүүний техникийн үзүүлэлтүүд, суурилуулах заавар, урьдчилан сэргийлэх арга хэмжээ, оновчтой ашиглахад зориулсан туслах хэрэгслүүд багтсан болно.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.