Phanteks XT Pro Mid-Tower Gaming Chassis User Manual

1. Танилцуулга

Thank you for choosing the Phanteks XT Pro Mid-Tower Gaming Chassis. This manual provides detailed instructions for the assembly, installation, and maintenance of your new PC case. The XT Pro is designed for high airflow performance, featuring a mesh front panel and tempered glass side panel, offering excellent cooling capabilities and a clear view of your internal components. It supports a wide range of hardware, including large graphics cards and extensive cooling solutions.

Figure 1.1: Phanteks XT Pro Mid-Tower Gaming Chassis, showcasing нь дэгжин хар загвар болон хатууруулсан шилэн хажуугийн самбартай.

2. Аюулгүй байдлын мэдээлэл

• Always disconnect the power supply from the wall outlet before performing any installation, cleaning, or maintenance.
• Handle tempered glass panels with care. They are fragile and can shatter if dropped or subjected to impact.
• Avoid exposing the chassis to extreme temperatures, humidity, or direct sunlight.
• Keep small components and screws out of reach of children.
• Ensure proper grounding to prevent electrostatic discharge (ESD) damage to sensitive electronic components.
• Do not attempt to modify the chassis structure or components, as this may void your warranty and pose safety risks.

3. Багцын агуулга

Please verify that all items listed below are present in your package. If any items are missing or damaged, please contact Phanteks customer support.

• Phanteks XT Pro Mid-Tower Chassis
• Дагалдах хэрэгслийн хайрцаг (эрэг, цахилгаан зангиа, бэхэлгээ гэх мэт)
• Хэрэглэгчийн гарын авлага (энэ баримт бичиг)
• (Optional, depending on model) 1x 120mm Fan

4. Тохиргоо ба суурилуулалт

4.1 Явах эд ангиудыг бэлтгэх

Before installing components, remove the side panels. The tempered glass side panel is typically secured with thumbscrews at the rear. The solid steel side panel may also use thumbscrews or a latch mechanism.

Зураг 4.1: View of the Phanteks XT Pro chassis with the tempered glass side panel installed.

Зураг 4.2: Арын дотоод засал view of the chassis, showing cable management routes and drive mounting locations.

4.2 Эх хавтангийн суурилуулалт

Install the necessary motherboard standoffs into the chassis tray according to your motherboard's form factor (ATX, Micro-ATX, Mini-ITX). Carefully place the motherboard onto the standoffs, aligning the screw holes, and secure it with the provided motherboard screws.

Зураг 4.3: Дотоод засал view of the Phanteks XT Pro with a motherboard, CPU cooler, and graphics card installed.

4.3 Цахилгаан хангамжийн нэгж (PSU) суурилуулах

The PSU mounts at the bottom rear of the chassis. Slide your PSU into the designated bay from the rear and secure it with screws. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference.

4.4 Хадгалах хөтч суурилуулах

The XT Pro supports multiple storage drives.

• 3.5" HDD: Install into the drive cage located under the PSU shroud.
• 2.5" SSD: Mount to the dedicated SSD brackets behind the motherboard tray.

Figure 4.4: Diagram illustrating the locations for 3.5" HDDs and 2.5" SSDs within the chassis.

4.5 График карт (GPU) суурилуулах

Remove the necessary PCIe slot covers at the rear of the chassis. Insert your graphics card into the PCIe slot on the motherboard and secure it with the thumbscrew or latch mechanism. The XT Pro supports large graphics cards without compromise.

4.6 Сэнс болон радиаторын суурилуулалт

The XT Pro offers extensive cooling support:

• Урд: Up to 3x 120mm or 2x 140mm fans.
• Топ: Up to 3x 120mm or 2x 140mm fans, supporting up to a 360mm radiator.
• Арын: 1х 120 мм-ийн сэнс.
• Доод талд: Up to 2x 120mm fans.

Install fans and radiators using the appropriate screws. Ensure correct airflow direction for optimal cooling.

Figure 4.5: Diagram showing fan and radiator mounting locations and supported sizes (120mm, 140mm, and radiator sizes).

4.7 Кабелийн менежмент

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics. Secure cables with zip ties or Velcro straps.

5. Явах эд ангиудыг ажиллуулах

5.1 Урд талын оролт гаралтын самбар

The front I/O panel is located on the top of the chassis and provides convenient access to essential ports and controls.

• Цахилгаан товч: Системийг асаах/унтраах.
• Дахин тохируулах товч: Системийг дахин эхлүүлнэ.
• USB 3.0 портууд: Өндөр хурдны өгөгдөл дамжуулах зориулалттай.
• USB-C 3.0 порт: Орчин үеийн USB-C төхөөрөмжүүдэд зориулагдсан.
• Аудио залгуурууд: Headphone and microphone ports.

Зураг 5.1: Ойрын зураг view of the top I/O panel, indicating the Power Button, Reset Button, USB 3.0, USB-C 3.0, and Audio/Microphone jacks.

6. Засвар үйлчилгээ

Тогтмол засвар үйлчилгээ нь таны компьютерын эд ангиудын оновчтой ажиллагаа, урт хугацааны ашиглалтыг хангахад тусална.

• Тоосны шүүлтүүр: The XT Pro features an ultra-fine performance mesh front panel and a top dust filter. Regularly clean these filters to maintain optimal airflow. They can typically be removed and cleaned with compressed air or a soft brush.
• Гадна цэвэрлэгээ: Гадна талын гадаргууг зөөлөн арчиж, damp даавуу. Зүлгүүрийн цэвэрлэгч эсвэл уусгагчаас зайлсхий.
• Дотоод цэвэрлэгээ: Periodically use compressed air to remove dust buildup from internal components like fans, heatsinks, and circuit boards. Ensure the system is powered off and unplugged before cleaning.

7. Алдаа засах

Энэ хэсэгт танд тулгарч болох нийтлэг асуудлуудыг авч үзэх болно.

• Систем асахгүй байна:
  • Check all power connections: PSU to wall, PSU to motherboard, and front panel power switch cable to motherboard.
  • PSU унтраалга "ON" байрлалд байгаа эсэхийг шалгаарай.
• Дэлгэцийн гаралт байхгүй байна:
  • Verify that the monitor cable is securely connected to the graphics card (or motherboard, if using integrated graphics).
  • График карт болон RAM модулиудыг дахин суулгана уу.
• Хэт их дуу чимээ:
  • Check if any fan cables are obstructing fan blades.
  • Ensure all fans are securely mounted.
  • Clean dust from fans and filters.
• Poor airflow/high temperatures:
  • Бүх тоосны шүүлтүүр болон дотор эд ангиудыг цэвэрлэ.
  • Verify correct fan orientation (intake/exhaust).
  • Ensure no cables are blocking airflow paths.

For further assistance, please refer to the Phanteks support webсайт эсвэл харилцагчийн үйлчилгээтэй холбогдоно уу.

8. Техникийн үзүүлэлтүүд

Зураг 8.1: Хэмжээ дууссанview of the Phanteks XT Pro chassis.

9. Баталгаат хугацаа ба дэмжлэг

Phanteks products come with a limited warranty. Please refer to the official Phanteks website for the most up-to-date warranty information and terms specific to your region.

For technical support, product registration, or to download the latest drivers and manuals, please visit the official Phanteks support page:www.phanteks.com/support.html

When contacting support, please have your product model number (PH-XT523P1_BK01) and purchase information ready.