Танилцуулга
Welcome to the world of Carrera GO!!! Max Competition. This race track set, model 20062574, offers an exciting Formula 1 racing experience with 1:43 scale cars and dynamic track elements. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and enjoyment of your race track.
For additional information and products, please visit the official Carrera webсайт: www.carrera-toys.com
Аюулгүй байдлын мэдээлэл
Please read all safety instructions carefully before operating the race track. Failure to follow these instructions may result in injury or damage to the product.
- This product is suitable for children aged 6 years and older. Adult supervision is recommended.
- Амьсгал боогдохоос сэргийлж жижиг хэсгүүдийг бага насны хүүхдээс хол байлга.
- Ensure all electrical connections are secure and dry. Do not operate the track near water.
- Only use the power adapter supplied with the set.
- Do not modify the track or cars in any way not specified by the manufacturer.
- Disconnect the power supply when the track is not in use or during assembly/disassembly.
Тохиргоо ба угсралт
Багцын агуулга
Before starting assembly, verify that all components are present. Refer to the "IN THE BOX" diagram below.

Figure 1: Contents of the Carrera GO!!! Max Competition Race Track Set. Includes two Formula 1 cars, track sections, speed controllers, and accessories.
- 2 x Carrera GO!!! Formula 1 Slot Cars (Mercedes-AMG F1 W14 E Performance "L. Hamilton" and Red Bull Racing RB19 "M. Verstappen")
- 2 x Speed Controllers with Turbo Button
- Track sections (straight tracks, curves, looping action, junction, lap counter)
- Power Supply (CEE 7/16 Europlug)
- Track barriers and supports
- Зааварчилгааны гарын авлага
Замын угсралт
The Carrera GO!!! Max Competition set features a track length of 6.3 meters (20.67 ft) and an assembled dimension of approximately 175 x 122 cm (5.74 x 4.00 ft). Assembly typically takes about 30 minutes.
- Тохиромжтой байршлыг сонгоно уу: Select a flat, stable surface large enough for the track layout.
- Connect track sections: Carefully connect the track pieces by sliding the connectors together. Ensure a snug fit for good electrical contact. Refer to the assembly diagram for the standard layout.
- Install special track elements: Integrate the looping action, junction, and lap counter as shown in the diagram. Use supports for elevated sections like the loop.
- Attach track barriers: Secure the red track barriers to the outer edges of curves to prevent cars from derailing.
- Connect power and controllers: Plug the power supply into the connection track section. Connect the two speed controllers to the designated ports on the connection track.
- Place cars on track: Position the slot cars onto the track, ensuring the guide keels are correctly seated in the track slot.

Figure 2: Standard track layout and assembly information for the Carrera GO!!! Max Competition set.
The set allows for multiple track layout options to enhance your racing experience. Experiment with different configurations as shown in the "Race Track Options" diagram.

Зураг 3: Жишээ ньamples of multiple race track layout options.
Ашиглалтын заавар
Once assembled, the race track is ready for immediate use. The set is designed for up to two players.

Figure 4: The included Formula 1 cars and speed controllers.
- Асаах: Цахилгаан адаптерийг ханын залгуурт холбоно уу.
- Уралдаан эхлүүлэх: Use the hand controller to control the speed of your car. Press the trigger to accelerate.
- Турбо нэмэгдүүлэх: Each controller is equipped with a turbo button. Press this button for a temporary burst of speed, useful for overtaking or navigating straight sections. Use with caution on curves to avoid derailing.
- Тоолуур: The integrated lap counter will automatically record the laps completed by the cars.
Зөвлөгөө: Practice controlling your car's speed, especially around corners and through the loop, to master the track and prevent derailing.
General Carrera Track Demonstration
The following video demonstrates general operation principles of a Carrera track set. While it features a different model (Carrera First Mario Kart), the basic concepts of car placement, controller use, and track interaction are similar.
Video 1: Demonstration of a Carrera track set, showing cars racing and controller usage. This video is for a Carrera First Mario Kart set and illustrates general track operation.
Засвар үйлчилгээ
- Зам цэвэрлэх: Regularly wipe the track rails with a clean, dry, lint-free cloth to remove dust and debris. This ensures good electrical contact for the cars.
- Машины засвар үйлчилгээ: Check the car's guide keel and contact brushes periodically. Replace worn brushes to maintain optimal performance. Ensure the wheels are clean and free of hair or fibers.
- Хадгалах: Ашиглаагүй үед зам болон машинуудыг хуурай, тоосгүй орчинд хадгална уу. Хэрэв удаан хугацаагаар хадгалах бол замыг болгоомжтой задалж авна уу.
Алдааг олж засварлах
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Машин хөдлөхгүй эсвэл удаан хөдөлдөг. |
|
|
| Car frequently derails. |
|
|
| Lap counter not working. |
|
|
Үзүүлэлтүүд
- Загварын дугаар: 20062574
- Брэнд: Каррера
- Хэмжээ: 1:43
- Замын урт: 6.3 метр (20.67 фут)
- Угсарсан хэмжээсүүд (Урт x Өргөн x Өндөр): 175 x 122 x 40 cm (approx. 5.74 x 4.00 ft)
- Эрчим хүчний эх үүсвэр: Electric with cord (CEE 7/16 Europlug)
- Тоглогчдын тоо: 2
- Санал болгож буй нас: 6+ жил
- Угсрах хугацаа: Ойролцоогоор 30 минут
- Жин: 2.5 кг
- Боловсролын зорилго: Hand-eye coordination, Concentration, Strategic thinking
- Онцлог шинж чанарууд: Authentic Formula 1 experience, Turbo button on controllers, Looping action, Junction, Lap counter.
Баталгаат болон дэмжлэг
This Carrera GO!!! Max Competition Race Track Set comes with a Үйлдвэрлэгчийн 2 жилийн баталгаат хугацаа. Баталгаат заргад зориулж худалдан авалтаа нотлох баримтаа үлдээнэ үү.
For technical support, spare parts, or further inquiries, please contact Carrera customer service or visit their official webсайт: www.carrera-toys.com.
Европын Холбоонд сэлбэг хэрэгслийн бэлэн байдлыг 1 жилийн хугацаатай баталгаажуулдаг.