1. Танилцуулга
This instruction manual provides comprehensive guidance for the safe and efficient operation, setup, maintenance, and troubleshooting of your Graco Ultra XT 490 Hi-Boy Electric Airless Sprayer. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.
The Graco Ultra XT 490 Hi-Boy is designed for professional painting applications, featuring advanced technologies for enhanced performance and durability. Key features include:
- Xtreme Torque Motor Technology: Provides powerful and consistent performance.
- RapidResponse Control: Ensures quick and precise pressure adjustments.
- Selectable Performance Modes: Allows optimization for various materials and applications.
- Easy-to-Read LED Digital Display: Offers clear visibility of operational settings.
- Endurance Vortex Piston Pump with ProConnect: Delivers extended pump life and easy on-the-job pump replacement.
- TurboClean Cleaning System: Facilitates fast and thorough cleaning.

2. Аюулгүй байдлын мэдээлэл
Always observe the following safety precautions to reduce the risk of injury or property damage. Failure to follow these instructions can result in serious injury or death.
- Тоног төхөөрөмжийг ажиллуулахын өмнө бүх зааврыг уншина уу.
- Wear appropriate personal protective equipment (PPE), including eye protection, gloves, and a respirator.
- Ensure the work area is well-ventilated and free from ignition sources.
- Never point the spray gun at yourself or others. High-pressure fluid can cause serious injury.
- Always relieve pressure before cleaning, servicing, or removing any parts.
- Use only Graco-approved replacement parts and accessories.
- Ашиглалтын явцад хүүхэд, тэжээвэр амьтдыг төхөөрөмжөөс хол байлга.
- Do not operate the sprayer if any part is damaged or malfunctioning.
- Connect the sprayer to a properly grounded electrical outlet.
3. Багцын агуулга
Verify that all components are present in the package before beginning setup:
- Graco Ultra XT 490 Hi-Boy Electric Airless Sprayer Unit
- Contractor PC Gun
- Өндөр даралтын хоолой
- RAC X LP 517 SwitchTip
- Хэрэглэх заавар (энэ баримт бичиг)
4. Тохиргоо
Follow these steps for initial setup of your Graco Ultra XT 490 Hi-Boy sprayer:
- Савлах: Сав баглаа боодолоос бүх бүрэлдэхүүн хэсгүүдийг болгоомжтой арилгана. Тээвэрлэлтийн гэмтэл байгаа эсэхийг шалгана уу.
- Positioning the Sprayer: Place the sprayer on a stable, level surface in a well-ventilated area. Ensure adequate space for operation and movement.
- Хоолойг холбох:
- Connect one end of the high-pressure hose to the fluid outlet on the sprayer. Tighten securely with a wrench.
- Connect the other end of the high-pressure hose to the inlet of the Contractor PC Gun. Tighten securely.
- Installing the Spray Tip:
- Ensure the spray gun trigger guard is engaged.
- Insert the RAC X LP 517 SwitchTip into the tip guard on the Contractor PC Gun.
- Rotate the tip 180 degrees to the spray position.
- Эрчим хүчний холболт: Connect the sprayer's power cord to a grounded 120V AC electrical outlet.

5. Ашиглалтын заавар
This section outlines the general operating procedures for the Graco Ultra XT 490 Hi-Boy sprayer. Always refer to the specific instructions for your chosen coating material.
- Шүршигчийг асгах:
- Place the suction tube into the paint container and the drain tube into a waste bucket.
- Үндсэн хавхлагыг "Prime" байрлал руу эргүүлнэ.
- Turn on the sprayer. The pump will begin to draw material.
- Once material flows smoothly from the drain tube, turn off the sprayer.
- Үндсэн хавхлагыг "Шүрших" байрлал руу эргүүлнэ.
- Даралтыг тохируулах:
- Шүршигчийг асаана уу.
- Use the RapidResponse Control and Easy-to-Read LED Digital Display to set the desired pressure. Start with a lower pressure and gradually increase until a consistent spray pattern is achieved.
- Select the appropriate performance mode for your material and application using the selectable performance modes feature.
- Шүрших техник:
- Hold the Contractor PC Gun perpendicular to the surface, maintaining a consistent distance.
- Begin moving your arm before pulling the trigger and release the trigger before stopping your arm movement.
- Overlap each pass by approximately 50% to ensure even coverage.
- Унтрааж байна:
- Шүршигчийг унтраа.
- Engage the trigger guard on the spray gun.
- Relieve pressure by turning the prime valve to the "Prime" position and holding the gun over a waste bucket until pressure is released.

6. Засвар үйлчилгээ
Regular maintenance ensures the longevity and optimal performance of your Graco Ultra XT 490 Hi-Boy sprayer.
- Хэрэглэх бүрийн дараа цэвэрлэх:
- Utilize the TurboClean Cleaning System for quick and efficient flushing of the system.
- Flush the sprayer with an appropriate cleaning solution (water for latex, mineral spirits for oil-based paints) until the fluid runs clear.
- Clean the spray gun, tip, and filter thoroughly.
- Насосны засвар үйлчилгээ:
- The Endurance Vortex Piston Pump with ProConnect allows for easy on-the-job pump replacement. Refer to the ProConnect instructions for detailed replacement procedures if necessary.
- Regularly check the pump for wear and tear.
- Хадгалах:
- Store the sprayer in a clean, dry, and frost-free environment.
- Always relieve pressure before storing.
- For long-term storage, circulate pump protector fluid through the system.
7. Алдаа засах
This section addresses common issues you might encounter with your Graco Ultra XT 490 Hi-Boy sprayer. For more complex problems, contact Graco customer support.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Шүршихгүй, сул шүршихгүй | Clogged tip, low pressure setting, air in system, worn pump. | Clean or replace tip, increase pressure, prime system, inspect pump. |
| Пульстай шүршигч | Air leak in suction hose, clogged filter, worn packings. | Check hose connections, clean filters, replace packings. |
| Мотор ажиллаж байгаа боловч даралт байхгүй | Prime valve in wrong position, clogged inlet strainer, dry pump. | Ensure prime valve is in "Spray", clean strainer, prime pump. |
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | Грако |
| Загварын нэр | Ultra XT 490 |
| Загварын дугаар | 19D521 |
| Эрчим хүчний эх үүсвэр | Цахилгаан 120 В |
| Хамгийн их даралт | 3300 PSI (Инч квадрат тутамд фунт) |
| Зөвлөмж болгож буй хэрэглээ | Уран зураг |
| Материал | Хуванцар (орон сууцны эд ангиуд) |
| Загвар | Cart-mounted, Hi-Boy |
| Зүйлийн жин | 78 фунт |
| Багцын хэмжээ | 33 x 25.5 x 22 инч |
| UPC | 769946346305 |
9. Баталгаат хугацаа ба дэмжлэг
Graco products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Graco website. For technical support, replacement parts, or service inquiries, please contact Graco customer service directly.
Та нэмэлт мэдээлэл, тусламжийн эх сурвалжийг эндээс авах боломжтой Graco Brand Store.