1. Танилцуулга
The Topyond M6C LCD Electric Bicycle Display is designed to provide clear and essential riding information for your e-bike. It features a large screen for easy readability, a waterproof connector for durability in various weather conditions, and compatibility with a range of electric bicycles and scooters. This manual provides detailed instructions for installation, operation, and maintenance.
Багцын агуулга:
- 1 x Topyond M6C Electric Bicycle Display Meter
- 1 x Зааварчилгааны гарын авлага
Image 1.1: The Topyond M6C LCD Electric Bicycle Display and its control unit.
2. Техникийн үзүүлэлтүүд
This section details the technical specifications of the Topyond M6C LCD Electric Bicycle Display.
- Барааны төрөл: Electric bicycle display
- Материал: ABS
- Жин: Approximately 0.2 Kilograms (201g/7.1oz)
- Ботьtage: Default label 36V (compatible with 24V, 36V, 48V, 60V systems)
- Суурилуулалтын диаметрийн хүрээ: 22.5mm (0.89in), 25.4mm (1in), 28.6mm (1.1in)
Image 2.1: Diagram illustrating the compatible installation diameter ranges for the display.
3. Суурилуулалт
Proper installation is crucial for the display's functionality and your safety. Follow these steps carefully.
3.1 Дэлгэц суурилуулах
- Select an appropriate position on your e-bike handlebars.
- Ensure the handlebar diameter is within the supported range: 22.5mm, 25.4mm, or 28.6mm.
- Securely attach the display bracket to the handlebar using the provided fasteners.
Image 3.1: The M6C display mounted on an e-bike handlebar, showing its position relative to the rider.
3.2 Утасны холболт
The display uses a waterproof connector. Ensure connections are firm and correctly aligned.
| Order Line | Color of Line | Чиг үүрэг |
|---|---|---|
| 1 | Улаан (VCC) | Meter wire |
| 2 | Цэнхэр (K) | Meter wire |
| 3 | Хар (GND) | Метр газардуулгын утас |
| 4 | Ногоон (RX) | Тоолуурын мэдээлэл хүлээн авах шугам |
| 5 | Шар (TX) | Meter data sending line |
Жич: Some product lead wires use waterproof connections. The internal wire colors may not be visible to the user.
Зураг 3.2: Ойрын зураг view of the waterproof connector, highlighting its design for durability.
Image 3.3: The rear of the display unit, showing the voltage label (e.g., 36V).
4. Үйл ажиллагаа
This section explains how to use the Topyond M6C display and its various functions.
4.1 Гол танилцуулга
The display features control buttons for various functions. Operations are categorized into short presses, long presses, and composite key presses.
Image 4.1: A close-up of the control buttons, typically located on a separate unit for easy access.
Short Press Functions:
- During Riding: Short press to modify power/speed file.
- Toggle Display Data: Short click to cycle through multi-function display areas.
- Switch Mode/State: Single key short press is primarily used for this purpose.
- Утга тохируулах: Short press to switch the value in multi-function display areas.
Long Press Functions:
- Гэрлийн удирдлага: Long press to turn headlights on or off.
- Speed Display Toggle: Long press to switch speed display.
- 6KM/H Cruise: From a static state, long press to enter 6KM/H cruise mode. Release to exit.
- Дэлгэц асаах/унтраах: If the display is working, long press to turn the screen off. Long press again to turn it on.
Composite Key Presses (Long Press Combinations):
Used for setting parameters to prevent accidental changes.
- P1 Menu Interface: Long press for five seconds to enter the P1 menu.
- ODO Clear Zero: Long press for five seconds in the P1 menu to clear ODO.
- Үйлдвэрийн тохиргоог сэргээх: Үйлдвэрийн тохиргоог сэргээхийн тулд 10 секундын турш удаан дарна уу.
4.2 Харуулсан мэдээлэл
The M6C display provides comprehensive data at a glance:
- Хурдны дэлгэц: Maximum Speed (MAX), Average Speed (AVG) in MPH or KM/H.
- Power Level Display: Одоогийн батерейны түвшин.
- Эрчим хүчний үзүүлэлт: Visual representation of power output.
- Failure Warning: Icons for various system faults.
- миль: Total Mileage (ODO), Single Mileage (TRIP A, TRIP B).
- Headlight Display: Indication when headlights are active.
- Single Running Time Display: Одоогийн унааны үргэлжлэх хугацаа.
- Батерейны эзлэхүүнtage (VOL) & Current (CUR): Бодит цагийн зайны хэмжээtage ба одоогийн.
- Gear Indication: Current PAS (Pedal Assist System) level (0-9).
- Унадаг дугуйн горим: Walk boost mode, Cruise constant speed mode.
4.3 Parameter Settings (P01-P22)
Access these settings via composite key presses to customize your display and e-bike behavior.
- P01: Backlight Brightness: 1 (darkest) to 3 (brightest).
- P02: Mileage Unit: 0 (KM), 1 (MILE).
- P03: Ботьtage түвшин: 24V, 36V, 48V, 60V, 64V (default 36V).
- P04: Dormancy Time: 0 (no dormancy), 1-60 minutes.
- P05: Туслаач File (PAS Gear Mode): 0 (3-file), 1 (3-mode), 2 (9-gear mode).
- P06: Wheel Diameter: Unit in inches.
- P07: Speed Magnetic Steel Number: 1-100.
- P08: Speed Magnetic Steel Number Range: 1-100.
- P09: Start Mode: 0 (Zero start), 1 (Non-zero start).
- P10: Drive Mode: 0 (Power Drive), 1 (Electric Drive via throttle).
- P11: Help Sensitivity: 1-24 (PAS sensitivity, high to low).
- P12: Help Start Intensity: 1-5 (PAS start protection, low to high).
- P13: Power Magnetic Steel Setting: 5, 8, 10, 12, 15, 18, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56, 60, 64, 68, 72, 76, 80, 84, 88, 92, 96, 100.
- P14: Controller Limit Value: Default 12A (range 1-20, higher value increases current).
- P15: Controller Under Voltage: Бага ботьtage хамгаалалтын үнэ цэнэ.
- P16: ODO Zero Setting: Long press key 5 seconds to clear ODO. Long press 10 seconds to restore factory settings.
- P17: Cruise Function: 0 (No enabling), 1 (Enabling cruising - automatic cruise optional for protocol 2 only).
- P18: Display Speed Ratio Adjustment: 50% - 150%.
- P19: Power Bit: 0 (0 file), 1 (does not include 0 file).
- P20: Protocol: 0 (1.5.5 Protocol), 1 (Protocol 2), 2 (Standby), 3 (Standby).
- P21: Throttle Gear Control: 0 (Instrument control), 1 (Full throttle, no gear, discrimination).
- P22: E-ABS Braking: 0 (No E-ABS), 1 (E-ABS regenerative braking when power off brake).
5. Алдааг олж засварлах болон алдааны кодууд
The display provides error codes to help diagnose potential issues with your e-bike system.
5.1 eVehicle Status Display Area
Icons on the display indicate the status of various components: Battery, Motor, Controller, Turn Signal, and Communication.
5.2 Fault Icons and Meanings
- Боть ботьtage алдаа: Indicates low battery voltage.
- Хөдөлгүүрийн гэмтэл: Мотортой холбоотой асуудал.
- Turn the fault: Issue with the turn signal system.
- Controller fault: Problem with the e-bike controller.
- Communication failures: Issue with data communication between components.
5.3 Vehicle Status Code Meaning
| Статусын код (аравтын тоо) | Төрийн утга | Тайлбар |
|---|---|---|
| E00 | Ердийн | No errors detected. |
| E02 | Тоормос | Brake lever engaged or fault. |
| E06 | Зайны хэмжээ бага байнаtage | Батерейны эзлэхүүнtage хэтэрхий бага байна. |
| E07 | Моторын эвдрэл | Мотортой холбоотой асуудал. |
| E08 | Эргэлтийн буруу ажиллагаа | Issue with turn signal. |
| E09 | Хянагчийн эвдрэл | Problem with the e-bike controller. |
| E10 | Meter data receiver failure | Display not receiving data. |
| E11 | Meter data sender failure | Display not sending data. |
6. Засвар үйлчилгээ
To ensure the longevity and optimal performance of your Topyond M6C LCD display, follow these maintenance guidelines:
- Цэвэрлэгээ: Дэлгэц болон их биеийг зөөлөн арчих, damp даавуу. Дэлгэцийг гэмтээж болох зүлгүүрийн цэвэрлэгч, уусгагч хэрэглэхээс зайлсхийх, эсвэл casing.
- Усны хамгаалалттай холбогч: While the connector is waterproof, avoid submerging the display in water. Ensure the connector is free from dirt and debris to maintain a secure connection.
- Хадгалах: When not in use for extended periods, store the e-bike and display in a dry, cool place away from direct sunlight and extreme temperatures.
- Кабелийн үзлэг: Periodically check all cables and connections for any signs of wear, damage, or loose connections.
7. Баталгаат хугацаа ба дэмжлэг
For warranty information, technical support, or any questions regarding your Topyond M6C LCD Electric Bicycle Display, please refer to the product packaging or contact Topyond customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
