Ortis Hi-Lo Sump Pump Switch Controller KJ-033 User Manual

1. Танилцуулга

The Ortis Hi-Lo Sump Pump Switch Controller KJ-033 is an electronic adjustable float switch designed for automatic water level management in various applications such as sewage pits, fish tanks, and water tanks. It features stainless steel anti-corrosion dual sensors and supports both 220V and 110V AC power inputs. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Аюулгүй байдлын мэдээлэл

Суурилуулах болон ажиллуулахын өмнө бүх аюулгүй байдлын зааврыг анхааралтай уншина уу. Эдгээр зааврыг дагаж мөрдөөгүй тохиолдолд цахилгаанд цохиулах, гал түймэр гарах эсвэл ноцтой гэмтэл бэртэлд хүргэж болзошгүй.

• Цахилгааны аюул: Суурилуулалт, засвар үйлчилгээ эсвэл алдааг олж засварлахын өмнө цахилгаан тэжээлийг салгасан эсэхийг шалгаарай.
• Ботьtage нийцтэй байдал: Цахилгаан хангамжийн хэмжээ байгаа эсэхийг шалгана ууtage matches the controller's specifications (220V/110V AC).
• Зөв газардуулга: Always connect the device to a properly grounded outlet.
• Усанд өртөх: Do not immerse the controller unit in water. The controller unit is designed to be mounted above the water level.
• Мэргэшсэн боловсон хүчин: Installation and electrical connections should be performed by qualified personnel if you are unsure.
• Байгаль орчны нөхцөл: Do not operate the device in explosive atmospheres or where flammable liquids or gases are present.

3. Бүтээгдэхүүний онцлог

The Ortis KJ-033 controller offers several features for reliable water level management:

• Dual Stainless Steel Sensors: Anti-corrosion sensors for accurate water level detection.
• Adjustable Sensor Range: Sensors can be adjusted from 1/2 inch to 20 inches to define high and low water levels.
• Олон үйлдлийн горимууд: Supports Drain Mode (for emptying) and Water Mode (for filling).
• LED үзүүлэлтүүд: Visual feedback for power, load status, and alarm conditions.
• Хэт ачааллын хамгаалалт: Integrated protection for connected pumps.
• Дууг хаах функц: Allows silencing of the alarm.
• Өргөн хэрэглээний програм: Suitable for sewage pits, fish tanks, water tanks, and other water management systems.

Зураг 3.1: Ortis Water Level Controller Overview with Key Features.

Зураг 3.2: Various Application Scenarios for the Controller.

4. Тохиргоо ба суурилуулалт

Proper installation is crucial for the reliable operation of the controller.

4.1 Хянагч суурилуулах

The controller unit should be mounted in a dry location, above the maximum water level, and within reach of a grounded power outlet.

• Шураг бэхэлгээ: Use appropriate screws and anchors to secure the controller to a wall or stable surface through the mounting tabs.
• Сорох аяга суурилуулах: For temporary or non-permanent installations, a suction cup can be used to attach the controller to a smooth, clean surface.

Зураг 4.1: Controller Installation Methods.

4.2 Sensor Installation and Adjustment

The dual sensors detect the high and low water levels. Their position determines the operating range of your pump.

• Мэдрэгчийн байршил: Position the sensors vertically in the water, ensuring they are securely fastened and will not move. The lower sensor defines the 'low' water level, and the upper sensor defines the 'high' water level.
• Тохируулах хүрээ: The sensors can be adjusted along their cables to set the desired water level range, from 1/2 inch to 20 inches apart. Ensure both sensors are submerged at the desired 'on' level and the lower sensor is exposed at the desired 'off' level for drain mode, or vice versa for water mode.
• Кабелийн менежмент: Route sensor cables to prevent entanglement or damage.

Зураг 4.2: Adjustable Sensor Installation.

4.3 Цахилгааны холболт

• Цахилгаан залгуур: Plug the controller's power cord into a grounded 220V or 110V AC outlet.
• Шахуургын холболт: Plug your sump pump or other load device into the outlet on the front of the controller. Ensure the pump's power requirements do not exceed the controller's output capacity (15A, up to 2HP).

Зураг 4.3: Example Sump Pit Installation.

5. Ашиглалтын заавар

The controller features a simple interface for selecting operating modes and managing alarms.

Зураг 5.1: Хяналтын самбар дууссанview.

5.1 горимын сонголт

Use the 'Drain' and 'Water' buttons to select the desired operating mode:

• Ус зайлуулах горим: (LED indicator 'Drain' illuminates) In this mode, the controller activates the pump when the water level reaches the upper (high) sensor and deactivates it when the water level drops below the lower (low) sensor. This mode is typically used for emptying sewage pits or sumps.
• Усны горим: (LED indicator 'Water' illuminates) In this mode, the controller activates the pump when the water level drops below the lower (low) sensor and deactivates it when the water level reaches the upper (high) sensor. This mode is typically used for replenishing water in fish tanks or water tanks.

5.2 Power and Operation Switch

The main switch controls the power and operational state of the connected load:

• АВТО: (LED indicator 'AUTO' illuminates) The controller operates automatically based on the selected mode (Drain or Water) and sensor readings.
• Унтрааж байна: (LED indicator 'OFF' illuminates) The connected pump is turned off, regardless of water levels.
• АСААЛТ: (LED indicator 'ON' illuminates) The connected pump is continuously turned on, regardless of water levels. Use this for manual override or continuous operation.

5.3 Дууг хаах функц

Press the 'Mute' button to silence any active alarms. The 'DisAlarm' LED will illuminate when the alarm is muted.

Зураг 5.2: Operational Logic in Drain Mode (Sewage Pit Example).

6. Засвар үйлчилгээ

Regular maintenance ensures the longevity and reliable operation of your Ortis controller.

• Мэдрэгчийн цэвэрлэгээ: Periodically inspect and clean the stainless steel sensors to remove any buildup of debris, algae, or mineral deposits that could affect their accuracy. Disconnect power before cleaning.
• Кабелийн үзлэг: Check all cables and connections for signs of wear, damage, or corrosion. Replace any damaged components immediately.
• Хяналтын нэгж: Keep the controller unit clean and dry. Avoid exposing it to direct sunlight or extreme temperatures.
• Туршилтын ажиллагаа: Periodically test the controller's operation by manually raising or lowering water levels to ensure the pump activates and deactivates as expected in the selected mode.

7. Алдаа засах

Нийтлэг асуудлууд болон тэдгээрийн шийдлүүдийг доорх хүснэгтээс харна уу.

8. Техникийн үзүүлэлтүүд

Зураг 8.1: Хянагчийн хэмжээсүүд.

9. Баталгаат хугацаа ба дэмжлэг

For warranty information and technical support, please refer to the product packaging or contact the seller/manufacturer directly. Keep your purchase receipt as proof of purchase.

Үйлдвэрлэгч: FJKJ INC.