EDISHINE HGSL51A

EDISHINE Low Voltage Ландшафтын гэрэлтүүлэг

Model: HGSL51A - Instruction Manual

Танилцуулга

The EDISHINE Low Voltage Landscape Lighting (Model HGSL51A) is designed to provide reliable and efficient illumination for outdoor spaces such as pathways, driveways, yards, and decks. These 8W, 12-24V AC/DC LED in-ground well lights feature a 3000K warm white light, 500 lumens brightness, and an IP67 waterproof rating, ensuring durability and performance in various weather conditions. This manual provides essential information for safe installation, operation, and maintenance of your lighting system.

Аюулгүй байдлын чухал мэдээлэл

Please read all instructions carefully before installation and retain this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Цахилгааныг салгах: Always disconnect power at the main circuit breaker or transformer before installing, servicing, or cleaning the fixture.
  • Бага ботьtage Систем: Энэ бүтээгдэхүүн нь 12-24V AC/DC бага вольтын хүчдэл дээр ажилладагtage. A compatible landscape lighting transformer (not included) is required to convert 110V household current to the appropriate low voltage. Do not connect directly to 110V-120V power.
  • Усны хамгаалалттай холболтууд: Ensure all electrical connections are properly sealed and waterproofed using appropriate connectors (not included) to prevent water ingress and electrical hazards.
  • Зөв холболт: Use only approved low voltage landscape lighting cable suitable for direct burial.
  • Гэмтлээс зайлсхийх: Do not install fixtures where they may be walked on by vehicles or subjected to excessive pressure. Avoid damaging the wire insulation during installation.
  • Ашиглалтын температур: Ensure the operating environment is within the specified temperature range of -4°F to 104°F (-20°C to 40°C).

Багцын агуулга

Суулгацыг эхлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд байгаа эсэхийг шалгана уу.

  • 8 x EDISHINE Low Voltage In-Ground Well Lights (Grille Model)
  • Суурилуулах тоног төхөөрөмж
  • Хэрэглэгчийн гарын авлага (энэ баримт бичиг)

Жич: Бага ботьtage landscape lighting transformer and power cord are ОРУУЛАХГҮЙ мөн тусад нь худалдаж авах ёстой.

Үзүүлэлтүүд

Загварын дугаарHGSL51A
ВатtageНэг гэрэлд 8 Вт
Ботьtage12-24V AC / DC
Цайвар өнгө3000К Халуун цагаан
ГэрэлтүүлэгНэг гэрэлд 500 люмен
Цацрагийн өнцөг25°
Усны эсэргүүцэлIP67 Усны хамгаалалттай
МатериалЦутгамал хөнгөн цагаан хайлш
Амьдрах хугацаа50,000 цаг хүртэл
Ашиглалтын температур-4°F - 104°F (-20°C - 40°C)
Бүтээгдэхүүний хэмжээс42L x 22.5W x 12.5H Centimetres (overall package)
Light Unit Size3.5 inch diameter (approximate)
БаталгаажуулалтETL жагсаалтад орсон

Бүтээгдэхүүний бүрэлдэхүүн хэсгүүд

Diagram showing the components of the EDISHINE in-ground well light, including 12 energy-efficient LED chips, an aluminum alloy heat dissipation body, a waterproof rubber ring, and an aluminum alloy cover with groove and one-piece design.

Зургийн тайлбар: This diagram illustrates the key components of the EDISHINE in-ground well light. It highlights the 12 energy-efficient LED chips, the robust aluminum alloy body designed for heat dissipation, the waterproof rubber ring ensuring a tight seal, and the durable aluminum alloy cover featuring a groove and one-piece construction for enhanced protection.

Цацрагийн өнцөг

Illustration showing a 25-degree beam angle from an in-ground light illuminating a wall, with icons for 8W LED, CRI90, 3000K, 500LM, and IP67.

Зургийн тайлбар: An illustration demonstrating the 25-degree beam angle of the EDISHINE in-ground light, projecting a focused warm light onto a vertical surface. Accompanying icons indicate key specifications: 8W LED, Color Rendering Index (CRI) of 90, 3000K color temperature, 500 lumens brightness, and an IP67 waterproof rating.

Тохиргоо ба суурилуулалт

Follow these steps for proper installation of your EDISHINE Low Voltage Landscape Lights:

  1. Төлөвлөгөөний зураглал: Determine the desired locations for each light. Consider the 25° beam angle for optimal illumination of pathways, features, or walls.
  2. Утас бэлтгэх: Dig shallow trenches for your low voltage landscape wiring. Ensure the wiring is suitable for direct burial and compatible with 12-24V AC/DC systems.
  3. Трансформаторт холбогдох: Бага дууг холбоноtage wires from the lights to a compatible 12V or 24V landscape lighting transformer (not included). It is crucial to ensure all connections are secure and properly waterproofed using appropriate connectors (not included) to prevent moisture damage.
  4. Гэрэл суурилуулах: Place each light into its designated in-ground location. The one-piece groove design helps prevent water damage and screw rust, contributing to the light's longevity. The grille top is designed to be nearly flat for easy blending into the landscape.
  5. Туршилтын систем: Once all lights are installed and connected, turn on the transformer to test the entire lighting system.

Lighting System Diagram

Diagram illustrating a low voltage landscape lighting system setup, showing a transformer connected to multiple in-ground lights spaced approximately 1.64 feet apart.

Зургийн тайлбар: This diagram shows a typical low voltage landscape lighting setup. A transformer is depicted on the left, connected via a main cable to a series of four in-ground lights. The lights are shown spaced approximately 1.64 feet apart, illustrating a common installation pattern. A note indicates that the transformer and power cord are not included.

Бүтээгдэхүүний хэмжээс

Technical drawing showing the dimensions of the EDISHINE in-ground well light, including its height, diameter, and the depth of the housing, along with the size of wire connectors.

Зургийн тайлбар: A detailed technical drawing providing the dimensions of the EDISHINE in-ground well light. Measurements include the overall height, the diameter of the top grille (4.04 inches), the depth of the housing (3.1 inches), and the diameter of the base (2.8 inches). The image also shows the dimensions of small wire connectors (0.9 inches tall).

Ашиглалтын заавар

The EDISHINE In-Ground Well Lights operate by connecting to a low voltage landscape lighting transformer. Once the transformer is powered on, the lights will illuminate. There is no individual switch on the lights themselves. Operation is controlled directly by the transformer's power supply or any timer/sensor connected to the transformer.

Засвар үйлчилгээ

Regular maintenance ensures optimal performance and longevity of your landscape lights:

  • Цэвэрлэгээ: Periodically clean the light grilles and lenses to ensure maximum light output. Use a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or lens.
  • Холболт шалгах: Inspect all wiring and connections regularly for any signs of damage, corrosion, or wear. Ensure all waterproof seals and connectors remain intact to prevent moisture ingress.
  • Хагархайг арилгах: Keep the area around the lights clear of leaves, mulch, and other debris that could obstruct light output or hinder heat dissipation.

Durable and Waterproof Design

Image showing EDISHINE in-ground lights performing in rain and snow, highlighting their IP67 waterproof rating and operating temperature range of -4 to 104 degrees Fahrenheit.

Зургийн тайлбар: This image demonstrates the robust IP67 waterproof capabilities of the EDISHINE in-ground lights. It shows the lights effectively illuminating outdoor spaces during both rainy and snowy conditions, emphasizing their suitability for all-weather outdoor use. The image also indicates a long lifespan of up to 50,000 hours and an operating temperature range of -4°F to 104°F.

Close-up image of the EDISHINE in-ground light's upgraded design, featuring a one-piece groove to prevent water damage and screw rust, extending the light's lifespan.

Зургийн тайлбар: Ойрын зураг view of the EDISHINE in-ground light, highlighting its upgraded design. The image points out the one-piece groove design, which is engineered to prevent water damage and screw rust, thereby prolonging the light's overall lifespan and ensuring consistent performance.

Алдааг олж засварлах

If you encounter issues with your EDISHINE landscape lights, refer to the following common problems and solutions:

  • Lights Do Not Turn On:
    • Check the transformer power supply. Ensure it is plugged in and receiving power.
    • Verify all wiring connections are secure and correct. Loose connections are a common cause of power issues.
    • Боть байгаа эсэхийг баталгаажуулна ууtage is within the specified 12-24V range. An incorrect voltage can prevent operation.
    • Inspect the low voltage cable for any cuts or damage.
  • Lights Are Dim or Flickering:
    • Check for loose connections at the transformer and at each light fixture.
    • Ensure the transformer is adequately sized for the total wattage of all connected lights. Overloading the transformer can cause dimming.
    • Verify there is no damage to the wiring or light units.
    • Clean the light lenses and grilles to remove any dirt or debris that might be obstructing light output.
  • Water Inside Fixture:
    • Нэн даруй цахилгааныг салга.
    • Inspect all seals and connections for proper installation and integrity. Re-seal or replace any compromised components.

Баталгаат болон дэмжлэг

EDISHINE provides a 1 жилийн хязгаарлагдмал баталгаат хугацаа on this product from the date of purchase, covering defects in materials and workmanship under normal use. This warranty does not cover damage caused by improper installation, accident, misuse, abuse, or unauthorized modifications.

For technical support, warranty claims, or any questions regarding your EDISHINE Low Voltage Landscape Lighting, please refer to your purchase documentation for specific contact details or visit the official EDISHINE webсайт.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.