1. Аюулгүй байдлын чухал мэдээлэл
Суулгах, ашиглахаасаа өмнө бүх зааврыг анхааралтай уншина уу. Эдгээр зааврыг дагаж мөрдөхгүй байх нь цахилгаан цочрол, гал болон бусад аюулд хүргэж болзошгүй. Энэ гарын авлагыг цаашид лавлах зорилгоор хадгална уу.
- АНХААРУУЛГА: Цахилгаанд цохиулах эрсдэлтэй. Суурилуулах эсвэл засвар үйлчилгээ хийхээс өмнө хэлхээний таслуур эсвэл гал хамгаалагчийн хайрцгийн цахилгааныг салга.
- This product is designed for use in dry or damp байршил. Усанд шууд өртөх газар бүү хэрэглээрэй.
- Do not attempt to modify the tube or its components.
- Бэхэлгээг зөв газардуулсан эсэхийг шалгаарай.
- For Type B (ballast bypass) installation, wiring should be performed by a qualified electrician to ensure safety and compliance with local electrical codes.
- Do not look directly into the operating LED tube.
2. Бүтээгдэхүүн дууссанview
The LumeGen 2ft LED Universal Tube is an energy-efficient lighting solution designed for versatile applications. It features a color temperature selector, allowing you to choose from five different white light options. Its shatterproof design ensures durability and safety.
Image: Two LumeGen 2ft LED Universal Tubes, highlighting the adjustable color temperature switch on each tube.
Гол онцлогууд:
- Олон талт нийцтэй байдал: Supports both Type A (ballast compatible) and Type B (ballast bypass/direct wire) installations.
- Тохиромжтой өнгөний температур: Easily switch between 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), 5000K (Daylight), and 6500K (Bright Daylight).
- Shatterproof and Durable Design: Constructed with a PET-coated glass body and frosted lens for enhanced safety and longevity. UL Listed for quality assurance.
- Эрчим хүчний хэмнэлттэй: Consumes only 8W while delivering 1100 lumens, offering significant energy savings compared to traditional fluorescent tubes.
- Урт наслалт: Rated for 50,000 hours of operation, reducing the need for frequent replacements.
3. Техникийн үзүүлэлтүүд
| Тодорхойлолт | Үнэ цэнэ |
|---|---|
| Брэнд | LumeGen |
| Загварын дугаар | LG-2T8-8-AB-5CCT |
| Гэрлийн төрөл | LED |
| Ватtage | 8 ватт |
| Гэрэлтүүлэг | 1100 люмен |
| Үр ашиг | Нэг ватт тутамд 137.5 люмен |
| Булцууны хэлбэрийн хэмжээ | T8 |
| Булцууны суурь | G13 |
| Өнгөний температур | 3000K/3500K/4000K/5000K/6500K (Selectable) |
| Ботьtage | 100-120 вольт |
| Давтамж | 60 Герц |
| Дундаж амьдрал | 50,000 цаг |
| Материал | Plastic (PET-coated glass) |
| Төгсгөлийн төрөл | Царцсан |
| Дотор/гадаа ашиглах | Дотор |
| Хэмжээ (ойролцоогоор) | 49.37 инч (урт) |
Image: Product dimensions and color temperature selector detail.
4. Суулгалт (Тохируулга)
The LumeGen Universal Tube supports both Type A (ballast compatible) and Type B (ballast bypass/direct wire) installations. Always ensure power is OFF before beginning installation.
Image: The LED tube is compatible with both Type A (ballast compatible) and Type B (ballast bypass) systems.
4.1. Type A (Ballast Compatible) Installation
This method uses your existing electronic ballast. Ensure your ballast is compatible with LED T8 tubes. Refer to your ballast's specifications for compatibility.
- Цахилгааныг унтраах: Locate the circuit breaker controlling the fixture and turn off the power. Verify power is off using a voltage шалгагч.
- Хуучин хоолойг зайлуулах: Одоо байгаа флуоресцент лампыг бэхэлгээнээс болгоомжтой салга.
- LED чийдэнг суурилуулах: Insert the LumeGen LED tubes into the fixture's sockets. Ensure they are securely seated.
- Эрчим хүчийг сэргээх: Хэлхээ таслагч дээр цахилгааныг дахин асаана уу.
4.2. Type B (Ballast Bypass / Direct Wire) Installation
This method bypasses the existing ballast and wires the fixture directly to the main power supply. This installation should only be performed by a qualified electrician.
- Цахилгааныг унтраах: Locate the circuit breaker controlling the fixture and turn off the power. Verify power is off using a voltage шалгагч.
- Remove Old Tubes and Ballast: Carefully remove the existing fluorescent tubes. Then, open the fixture and disconnect the wiring from the ballast. Remove the ballast from the fixture.
- Rewire Fixture: Wire the fixture's lamp holders directly to the main power supply (100-120V AC, 60Hz). The LumeGen LED tube is single-ended powered, meaning power is supplied to one end of the tube. Connect the live (L) and neutral (N) wires to the pins on one end of the tube's socket. Consult the wiring diagram provided with the product packaging for specific instructions.
- LED чийдэнг суурилуулах: Insert the LumeGen LED tubes into the rewired fixture's sockets. Ensure they are securely seated.
- Эрчим хүчийг сэргээх: Хэлхээ таслагч дээр цахилгааныг дахин асаана уу.
Image: Visual representation of the LED tube installation process.
5. Үйл ажиллагаа
The LumeGen LED Universal Tube features a convenient switch to select your desired color temperature.
- Ensure Power is On: After installation, turn on the power to the fixture.
- Locate the CCT Switch: On one end of the LED tube, you will find a small slider switch labeled with color temperature options (3000K, 3500K, 4000K, 5000K, 6500K).
- Өнгөний температурыг сонгох: Gently slide the switch to the desired Kelvin (K) setting. The light output will change immediately to reflect your selection.
- Шаардлагатай бол тохируулах: You can change the color temperature at any time while the tube is powered on.
6. Засвар үйлчилгээ
The LumeGen LED Universal Tube requires minimal maintenance.
- Цэвэрлэгээ: Цэвэрлэхийн өмнө цахилгааныг унтраасан эсэхээ шалгаарай. Зөөлөн, хуурай эсвэл бага зэрэг хуурай цэвэрлэгч ашиглана уу.amp cloth to wipe the surface of the tube. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the tube's finish or coating.
- Шалгалт: Periodically inspect the tubes and fixture for any signs of damage or loose connections. If any issues are found, disconnect power and address them promptly.
- Хадгалах: If storing the tubes, keep them in their original packaging in a cool, dry place away from direct sunlight and extreme temperatures.
7. Алдаа засах
If you encounter issues with your LumeGen LED Universal Tube, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хоолой асахгүй байна. | Бэхэлгээнд хүч байхгүй. Improper installation (loose connection). Incompatible ballast (for Type A). Faulty tube. | Хэлхээ таслагч болон ханын унтраалгыг шалгана уу. Ensure tubes are securely seated in sockets. For Type B, verify wiring. If Type A, confirm ballast compatibility or consider Type B installation. Test with another known working tube if available. |
| Хоолой чичирч байна. | Incompatible ballast (for Type A). Сул холболт. Ботьtage хэлбэлзэл. | If Type A, ensure ballast is compatible. Some older ballasts may cause flickering. Consider Type B installation. Холболтуудыг шалгана уу. Хэрэв боть бол цахилгаанчинтай зөвлөлдөх хэрэгтэйtage асуудлуудыг сэжиглэж байна. |
| Буруу өнгөний температур. | CCT шилжүүлэгчийг буруу тохируулсан байна. | Adjust the CCT selector switch on the tube to the desired setting. |
| Гэрэлтэлтийг бууруулсан. | Dust or dirt on tube surface. End of tube lifespan. | Clean the tube surface with a soft, dry cloth. If tube is near end of its rated lifespan, replacement may be necessary. |
8. Баталгаат хугацаа ба дэмжлэг
LumeGen products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact LumeGen customer support.
If you require technical assistance, have questions about installation, or need to report a defect, please contact LumeGen customer support through the retailer where the product was purchased or visit the official LumeGen webхолбоо барих мэдээлэл авах сайт.
LumeGen Store: Амазон дээрх LumeGen дэлгүүрт зочлоорой