Generic Solar Pathway Lights Outdoor 4 Pack Instruction Manual

Танилцуулга

Худалдан авалт хийсэнд баярлалааasing the Generic Solar Pathway Lights. These lights are designed to provide efficient and decorative outdoor illumination for your yard, lawn, walkway, or driveway. Featuring a durable stainless steel and glass construction, an efficient solar panel, and dual brightness settings, these lights are built for reliable, year-round performance.

1. Тохиргоо ба суурилуулалт

Before first use, ensure the solar lights are assembled correctly and placed in an area that receives direct sunlight for optimal charging.

1.1 Unboxing Contents

Бүх бүрэлдэхүүн хэсгүүд багцад байгаа эсэхийг шалгана уу:

• 4 х нарны гэрэл
• 4 х бооцоо
• 1 x Use Manual (this document)

1.2 Угсрах үе шатууд

1. Гэрлийг идэвхжүүлэх: Gently twist off the top cap of the light fixture. Locate the ON/OFF/MODE switch on the underside of the cap. Set the switch to either Mode 1 (12 lumens) or Mode 2 (25 lumens) to activate the light. Ensure the light is turned ON before charging.

Image: Underside of the solar light cap showing the ON/OFF/MODE switch.



This image shows the underside of the solar light's top cap, highlighting the solar panel and the switch for power and brightness settings. The switch allows selection between two brightness modes or turning the unit off.

2. Гадас цуглуулах: The spike is inserted into the tube. Remove the spike from the bottom of the metal tube, flip it, and reinsert it into the tube to form the ground stake.

Image: Assembly of the metal tube and ground stake.



This image illustrates the assembly process of the solar light's stake. It shows how the pointed ground spike is attached to the metal pole, ready for insertion into the ground.

3. Connect the Light Head: Attach the light fixture (top cap with glass housing) to the assembled metal tube and stake.
4. Байршил: Choose a location that receives at least 6-8 hours of direct sunlight daily. Avoid placing lights under trees or near other light sources (like streetlights) that might interfere with the auto dusk-to-dawn sensor.
5. Газарт оруулах: Gently push the assembled light into the ground. If the ground is too hard, loosen the soil first to prevent damage to the stake.

Image: Easy installation steps for the solar pathway lights.



This image provides a visual guide for installing the solar pathway lights. It shows twisting off the cap, turning on the switch, connecting the pole and spike, and inserting the light into the ground. It also advises loosening hard ground.

1.3 Суурилуулалтын видео

Watch this video for a visual guide on assembling and installing your solar pathway lights.

This video demonstrates the simple assembly process of the solar pathway lights, including connecting the pole and activating the light. It also shows the lights installed in a garden setting at night.

2. Ашиглалтын заавар

The Generic Solar Pathway Lights are designed for automatic operation.

2.1 Автомат ажиллагаа

Once activated and fully charged, the lights will automatically turn on at dusk and turn off at dawn. The integrated solar panel charges the internal battery during the day.

2.2 Гэрэлтүүлгийн тохиргоо

You can select between two brightness levels:

• Mode 1 (12 Lumens): Provides a softer glow and extends the operating time (12-16 hours). Ideal for winter or when longer illumination is desired.
• Mode 2 (25 Lumens): Offers brighter illumination for enhanced visibility (8-10 hours). Suitable for summer or when maximum brightness is needed.

Image: Diagram illustrating dual brightness modes and their corresponding runtimes.

This diagram visually explains the two brightness settings (12 lumens and 25 lumens) and their respective operating durations, indicating longer runtime for lower brightness and vice-versa.

Image: Comparison of 25 lumens (high brightness) and 12 lumens (low brightness) in an outdoor setting.

This image shows a side-by-side comparison of the solar light operating at 25 lumens (high brightness) and 12 lumens (low brightness) in a garden, demonstrating the visual difference in light output.

3. Засвар үйлчилгээ

Regular maintenance ensures optimal performance and longevity of your solar pathway lights.

3.1 Цэвэрлэгээ

Wipe the solar panel regularly with a soft, damp тоос шороо, хог хаягдлыг арилгах даавуу. Цэвэр нарны хавтан нь үр ашигтай цэнэглэлтийг баталгаажуулдаг.

3.2 Батерейны арчилгаа

The lights are equipped with a LiFePO4 3.2V 600mAh battery. While designed for longevity (2000-3000 cycles), if the light duration significantly decreases, the battery may need replacement. Use only compatible LiFePO4 3.2V 600mAh 14500 batteries.

Image: Close-up of the LiFePO4 battery inside the solar light.

Энэ зураг нь дэлгэрэнгүй мэдээллийг өгдөг view of the LiFePO4 3.2V 600mAh battery installed within the solar light, indicating its specifications and position for potential replacement.

3.3 Цаг агаарын эсэргүүцэл

These lights feature an IP65 waterproof design, making them resistant to rain, snow, and heat. However, extreme weather conditions may temporarily affect performance. Ensure the lights are securely staked to withstand strong winds.

Image: Solar light in a rainy environment, highlighting its IP65 waterproof rating.

This image shows the solar light functioning effectively in a rainy outdoor setting, emphasizing its IP65 waterproof and weather-resistant design.

4. Алдаа засах

If your solar pathway lights are not performing as expected, consider the following:

• Гэрэл асахгүй байна:
  • Ensure the ON/OFF/MODE switch is set to Mode 1 or Mode 2.
  • Verify the solar panel is clean and receiving adequate direct sunlight (6-8 hours).
  • Check if the light is placed near other strong light sources (e.g., streetlights) that might trigger the dusk sensor to keep the light off.
  • Allow the light to charge for at least 24-48 hours in direct sunlight before expecting full performance.
• Short Illumination Time:
  • The solar panel may not be receiving enough direct sunlight. Relocate the light to a sunnier spot.
  • The battery may not be fully charged due to cloudy weather or insufficient sunlight.
  • If using Mode 2 (25 lumens), switch to Mode 1 (12 lumens) for extended runtime.
  • Батерейны ашиглалтын хугацаа дуусах дөхөж байгаа тул солих шаардлагатай байж магадгүй.

5. Техникийн үзүүлэлтүүд

6. Баталгаат хугацааны мэдээлэл

This product comes with a manufacturer's warranty of 180 days from the date of purchase. Please retain your proof of purchase for any warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

7. Хэрэглэгчийн дэмжлэг

For further assistance, technical support, or warranty inquiries, please contact the retailer or manufacturer directly. Refer to your purchase documentation for specific contact details.