Vantec Multi-Function M.2 NVMe/SATA Storage Adapter with Clone Function

Танилцуулга

The Vantec Multi-Function M.2 NVMe/SATA Storage Adapter (CB-M2NVME-C3) is a versatile device designed for connecting various storage types, including M.2 NVMe, M.2 SATA, 2.5-inch SATA, and 3.5-inch SATA drives. It facilitates data management, recovery, and cloning operations. This adapter connects to your computer via a fast USB 3.2 Gen2x1 USB-C interface, allowing access to two storage devices simultaneously. It supports standalone cloning and can also be used as a USB backup device or for upgrading OS drives.

Тохиргоо

Багцын агуулга

• Multi-Function M.2 NVMe/SATA Storage Adapter with Clone
• M.2 Mount pole
• АС адаптер
• USB C to C/A cable
• Шуурхай суулгах гарын авлага

Физик суурилуулалт

1. Эрчим хүчийг холбох: Connect the provided AC adapter to the DC 12V input connector on the adapter and then to a power outlet.
2. USB холбох: Connect the USB C to C/A cable from the adapter's USB C Upstream Port to an available USB port on your computer.
3. Insert M.2 Drives: For M.2 NVMe or M.2 SATA drives, align the drive with the corresponding M.2 slot (Source or Target) and gently insert it. Secure the drive with the M.2 mount pole. The adapter supports M.2 NVMe/SATA sizes 2230, 2242, 2260, 2280, 22110, 2580, and 25110.
4. Insert SATA Drives: For 2.5-inch or 3.5-inch SATA drives, slide the drive into the designated SATA slot (Source or Target). Ensure a firm connection.
5. Асаах: Press the Power Switch to turn on the adapter.

Зураг: Дууслааview of the adapter's ports and switches, including the USB C Upstream Port, Power Switch, and Power Input Connector.

Image: The adapter demonstrating compatibility with various drive types, including M.2 NVMe, M.2 SATA, 2.5-inch SATA SSD, and 3.5-inch SATA HDD.

Ашиглалтын заавар

Data Access Mode (Dock/Adapter Function)

When connected to a computer, the adapter functions as a multi-bay dock, allowing you to access data on up to two inserted drives simultaneously. Each drive will appear as a separate drive letter in your operating system. This mode is suitable for data recovery, transferring files, or using drives as external storage.

Image: The adapter's layout, highlighting its capability to access data from M.2 NVMe, M.2 SATA, and 2.5/3.5-inch SATA devices.

Standalone Cloning (Offline Cloning)

The adapter supports standalone cloning, meaning it can clone drives without being connected to a computer. Ensure the source drive has equal or less capacity than the target drive.

1. Драйвуудыг оруулах: Insert the Source drive into the 'SOURCE' slot and the Target drive into the 'TARGET' slot.
2. Set Clone Direction: Use the 'Clone Direction Switch' to select the appropriate cloning mode:
   • SATA to NVMe: For cloning 2.5"/3.5" SATA or M.2 SATA to M.2 NVMe.
   • NVMe to NVMe: For cloning M.2 NVMe to M.2 NVMe.
3. Асаах: Ensure the adapter is powered on.
4. Клоныг эхлүүлэх: Press and hold the 'CLONE' button for approximately 4 seconds until the progress indicator lights illuminate. Release the button.
5. Confirm Clone: Press the 'CLONE' button again briefly to start the cloning process. The progress indicator lights (25%, 50%, 75%, 100%) will show the cloning status.
6. Дуусгах: The cloning process is complete when all indicator lights are solid.

Image: Detailed diagram illustrating the correct 'Clone Switch' settings for different cloning scenarios, including SATA to M.2 NVMe and M.2 NVMe to M.2 NVMe.

Image: Visual guide demonstrating various cloning combinations supported by the adapter, such as 2.5" SATA SSD to M.2 NVMe, 3.5" SATA HDD to M.2 NVMe, M.2 SATA to M.2 NVMe, and M.2 NVMe to M.2 NVMe.

Software Cloning (Connected to System)

When connected to a computer, you can use third-party cloning software to perform cloning operations. This method offers more flexibility in cloning combinations and settings.

• Clone M.2 NVMe to M.2 NVMe
• Clone M.2 NVMe to M.2 SATA
• Clone M.2 NVMe to 2.5" SATA
• Clone M.2 NVMe to 3.5" SATA
• Clone M.2 SATA to M.2 NVMe
• Clone 2.5" SATA to M.2 NVMe
• Clone 3.5" SATA to M.2 NVMe

Засвар үйлчилгээ

• Адаптерийг цэвэр, тоосгүй байлга. Цэвэрлэхийн тулд зөөлөн, хуурай даавуу ашиглана уу.
• Төхөөрөмжийг хэт өндөр температур, чийгшилд оруулахаас зайлсхий.
• Ашиглалтын явцад адаптерийн эргэн тойронд зохих агааржуулалтыг хангах.
• Ашиглаагүй үед адаптерийг аюулгүй, хуурай газар хадгална уу.

Алдааг олж засварлах

• Төхөөрөмж танигдаагүй байна: Ensure all cables (power and USB) are securely connected. Try a different USB port on your computer. Verify the adapter is powered on.
• Drives not appearing: Check if the drives are correctly seated in their respective slots. For new drives, they may need to be initialized and formatted in Disk Management (Windows) or Disk Utility (macOS).
• Cloning fails: Ensure the target drive's capacity is equal to or larger than the source drive's capacity. Verify the 'Clone Direction Switch' is set correctly for your cloning scenario. Ensure both drives are properly inserted and detected.
• Удаан дамжуулах хурд: Ensure you are connected to a USB 3.2 Gen2x1 (10Gbps) compatible port on your computer. Older USB ports will result in slower speeds.

Үзүүлэлтүүд

Баталгаат хугацааны мэдээлэл

This Vantec product comes with a 1-year warranty covering parts and labor from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

Дэмжлэг

For technical support, product inquiries, or further assistance, please visit the official Vantec webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу. Та дэлгэрэнгүй мэдээлэл, эх сурвалжийг хаягаас авах боломжтой Vantec Store on Amazon or their main support portal.