HIRALIY Solar Automatic Drip Irrigation System User Manual

Танилцуулга

This manual provides detailed instructions for the setup, operation, and maintenance of your HIRALIY Solar Automatic Drip Irrigation System. This device is designed to provide efficient and automated watering for your potted plants, gardens, and other irrigation needs, utilizing solar power and offering flexible scheduling options.

Зураг: Дууслааview of the HIRALIY Solar Automatic Drip Irrigation System and its included components.

Багцын агуулга

Дараах бүх бүрэлдэхүүн хэсгүүд таны багцад байгаа эсэхийг шалгаарай.

• 1x Main Machine (Solar Powered Watering Device)
• 12x Pressure Balanced Drippers
• 1x 40 ft (1/4 inch) Black PVC Tube
• 4х залгуур
• 1x Газрын гадас
• 1х шүүлтүүр

Image: Visual representation of all included parts: main unit, ground stake, filter, tubing, drippers, and plugs.

Тохиргоо ба суурилуулалт

Анхны асаалт

For first-time use, press and hold the OK button on the device for approximately 5 seconds until the full screen display activates.

Assembling the Drip System

The system is designed for simple installation without the need for heating or softening tubes. Follow these steps:

1. Attach one end of the tubing to the filter and place the filter into your water container.
2. Insert the other end of the tubing into the water inlet (IN) port on the main unit.
3. Cut the remaining tubing to your desired lengths for connecting drippers.
4. Insert one end of the cut tubing into the water outlet (OUT) port on the main unit.
5. Connect the drippers by cutting the tubing at appropriate intervals and inserting the drippers.
6. Insert a plug into the end of the last dripper line to seal the system.

Image: Step-by-step guide for assembling the drip irrigation system, including connecting tubing to the filter, main unit, and drippers.

Tube Connection Guidelines

Ensure tubes are fully inserted into connectors to prevent leakage and ensure proper pump function. Insert the tube into the connector about 15mm (5/8"). To remove a tube, press the blue ring on the connector before pulling the tube out.

Image: Visual guide on how to properly insert and remove tubing from the dripper connectors.

Image: Illustration of fully inserting the tube into the main unit's port by 15mm (5/8") to prevent pump failure.

Суурилуулах сонголтууд

The main unit can be mounted in two ways:

• Mounted on Wall: Use screws (not included) to secure the unit to a wall or fence.
• Mounted in Soil: Use the provided ground stake for easy insertion into soil.

Image: Depiction of the two primary installation methods for the main unit: wall-mounted and ground-mounted.

Ашиглалтын заавар

Setting Watering Schedules

The system allows for customizable watering plans. You can set up to 3 watering plans per day (P1, P2, P3) with specific start times, durations, and frequencies.

• Услах хугацаа: Adjustable from 1 second to 90 minutes.
• Услах давтамж: Adjustable from 1 day to 14 days.
• To disable a watering plan, set its 'HOW OFTEN' parameter to OFF.

Image: Detailed explanation of the control dial functions for setting local time, start time, watering duration, and frequency, along with AUTO mode operation.

Adjusting Dripper Flow

The pressure-compensating drippers ensure even water distribution. You can adjust the flow rate of individual drippers to meet the specific needs of different plants.

Image: Visual guide demonstrating how to adjust the blue dripper mechanism for either slow or fast water delivery.

Хос тэжээлийн сонголтууд

The system is primarily solar-powered. For periods of insufficient sunlight, especially during autumn and winter or for indoor use, the device can be charged via its USB port.

Image: The main unit showcasing its solar panel for charging, indicating an expected charge duration of 60-90 days.

Image: The main unit connected to a USB charger, demonstrating its suitability for indoor irrigation and charging.

Засвар үйлчилгээ

Pump Longevity

The system features a premium quality pump designed for consistent water delivery over an extended period, even after 3 years of continuous use. The pump delivers 800 ml/min.

Усны эсэргүүцэл

The device has high water resistance, but it is important not to fully immerse the main unit in water. Ensure the unit is positioned where it will not be submerged.

Image: The main unit enduring water splashes, highlighting its high water resistance while advising against full immersion.

Шүүлтүүрийг цэвэрлэх

Regularly check and clean the water filter to prevent blockages and ensure optimal pump performance. A clogged filter can reduce water flow and strain the pump.

Алдааг олж засварлах

• Усны урсгал байхгүй: Check if the water source is empty. Ensure the filter is clean and not clogged. Verify all tube connections are secure and fully inserted. Check if the pump is running.
• Усны жигд бус хуваарилалт: Adjust individual drippers to balance the flow. Ensure the water source is sufficiently elevated if gravity assist is desired, though the pump is designed for consistent pressure.
• Төхөөрөмж асахгүй байна: Ensure the device has sufficient charge. If solar charging, place it in direct sunlight. If indoors, connect it to a USB power source. Perform the initial power-on sequence (hold OK button for 5 seconds).
• Нэвчилт: Re-check all tube connections, ensuring they are fully inserted (15mm or 5/8"). Ensure plugs are securely in place at the end of the lines.
• Watering Schedule Not Activating: Verify that the current time is set correctly. Ensure the watering plan's 'HOW OFTEN' setting is not set to OFF.

Үзүүлэлтүүд

Баталгаат болон дэмжлэг

For warranty information, technical support, or assistance with your HIRALIY Solar Automatic Drip Irrigation System, please refer to the contact details provided with your product packaging or visit the official HIRALIY webсайт. Баталгаат зардлаа авахын тулд худалдан авалтын баримтаа хадгална уу.