Longer RAY5 Mini 3.5W

Longer RAY5 Mini Laser Engraver (3.5W) Instruction Manual

Your guide to setting up, operating, and maintaining your Longer RAY5 Mini Laser Engraver.

1. Бүтээгдэхүүн дууссанview

The Longer RAY5 Mini is a compact and portable laser engraver and cutter designed for various materials. It features a 3.5W laser module, a 140x130mm engraving area, and multiple connectivity options for ease of use.

Longer RAY5 Mini Laser Engraver, a compact black frame laser machine on a wooden surface.

Figure 1: Longer RAY5 Mini Laser Engraver (3.5W) - Overall View

2. Аюулгүй байдлын мэдээлэл

Always prioritize safety when operating the laser engraver. Failure to follow safety guidelines can result in serious injury or damage to the device.

  • Нүд хамгаалах: Ашиглалтын явцад өгөгдсөн лазер хамгаалалтын шилийг үргэлж зүүж байгаарай.
  • Laser Shield: Ensure the laser shield is properly installed to reduce laser exposure.
  • Яаралтай зогсолт: Familiarize yourself with the emergency stop button and its location. Press it immediately in case of any malfunction or hazard.
  • Агааржуулалт: Operate the device in a well-ventilated area to dissipate fumes and smoke generated during engraving/cutting.
  • Шатамхай материал: Avoid engraving or cutting highly flammable materials without proper precautions.
Four images showing safety features: an emergency stop button, limit switches, an acrylic cover, and protective glasses.

Зураг 2: Аюулгүй байдлын олон хамгаалалт

3. Тохируулах гарын авлага

3.1 Хайрцагнаас задлах, анхны үзлэг

The Longer RAY5 Mini comes pre-assembled for quick setup. Carefully remove all components from the packaging and check for any missing items or damage.

Video 1: LONGER RAY5 Mini Laser Engraver Unboxing. This video demonstrates the unboxing process and initial setup of the laser engraver.

Opened cardboard box containing a pre-assembled laser engraver frame. The device has a black frame with silver components and a green circuit board visible.

Figure 3: Pre-assembled frame and laser engraver components inside the box.

3.2 Connecting the Laser Module

  1. Carefully insert the laser module into its designated slot on the machine.
  2. Secure the laser module using the provided thumb screws.
  3. Connect all necessary cables from the laser module to the main unit, ensuring they are firmly seated.

3.3 Эрчим хүчний холболт

  1. Plug the DC power adapter into the machine's power port.
  2. Цахилгаан адаптерийг тохирох цахилгаан залгуурт холбоно уу.
  3. Ensure the emergency stop button is disengaged (turned counter-clockwise) and the rocker switch is in the 'ON' position.

4. Ашиглалтын заавар

4.1 Software Installation and Connection

The Longer RAY5 Mini supports various software for design and control, including LaserGRBL (free) and LightBurn (paid). It also offers Wi-Fi and APP connectivity.

  • LaserGRBL: Download and install LaserGRBL from the official website. Ensure the CH340 driver is installed for USB connection.
  • LightBurn: Download and install LightBurn. Import the device configuration file for RAY5 Mini.
  • APP/Wi-Fi: Connect your device to the engraver via Wi-Fi using the dedicated app for mobile control.

Video 2: Ray5 mini Laser GRBL Installation and Usage Guide. This video provides a step-by-step guide on installing and using LaserGRBL software.

Video 3: Ray5 mini LightBurn Installation and Usage Guide. This video demonstrates the installation and usage of LightBurn software.

Video 4: Ray5 mini tutorial by using LaserBurn APP in STA mode. This video guides users through using the LaserBurn app in STA mode.

4.2 Лазер дээр анхаарлаа төвлөрүүлэх

Accurate focusing is crucial for optimal engraving and cutting results. Use the provided focus block to set the correct distance between the laser module and the material surface.

  1. Place the material to be engraved/cut on the working area.
  2. Position the focus block directly under the laser module.
  3. Loosen the thumb screw on the laser module.
  4. Lower the laser module until its bottom edge gently touches the top of the focus block.
  5. Tighten the thumb screw to secure the laser module in place.
  6. Remove the focus block. The laser is now focused.

4.3 Сийлбэр ба зүсэх үйл явц

Once the laser is focused and connected to your chosen software, you can begin your projects.

  • Материалын нийцтэй байдал: The RAY5 Mini can engrave over 300 types of materials, including wood, leather, metal, and acrylic.
  • Нарийвчлал: Achieve detailed results with a 0.04mm x 0.04mm ultra-fine laser spot and 0.01mm accuracy.
  • Хурд: Engrave at speeds up to 12,000mm/min for efficient project completion.
An infographic showing the Longer RAY5 Mini Laser Engraver's features: light weight, high speed (12,000mm/min), 0.04x0.04mm laser spot size, 130x140mm working area, compatibility with LaserGRBL, LightBurn, LaserBurn, and over 300 engravable materials.

Figure 4: Key Features of the Longer RAY5 Mini

A split image comparing engraving quality: 'Ray5 mini 0.04*0.04 mm' shows finer detail on the left, while 'Others 0.15mm*0.15mm' shows coarser detail on the right.

Figure 5: Comparison of Engraving Precision

Video 5: Ray5 Mini Engraves Wood Panels with Ease & Precision. This short video demonstrates the engraver's ability to create precise designs on wood.

5. Засвар үйлчилгээ

Regular maintenance ensures the longevity and optimal performance of your Longer RAY5 Mini.

  • Цэвэрлэгээ: Regularly clean the laser lens and the working area to prevent debris buildup. Use a soft, lint-free cloth and appropriate cleaning solutions.
  • Тосолгоо: Periodically lubricate the guide rails and moving parts as recommended in the detailed manual to ensure smooth operation.
  • Кабелийн үзлэг: Check all cables for wear or damage. Replace any damaged cables immediately.

6. Алдаа засах

If you encounter issues with your Longer RAY5 Mini, refer to the following common problems and solutions:

АсуудалБоломжит шалтгаанШийдэл
Лазер асахгүй эсвэл сул гаралтIncorrect focus, dirty lens, low power setting, loose cable.Re-focus the laser, clean the lens, increase power setting in software, check cable connections.
Машин компьютер/програмд ​​холбогдохгүй байнаDriver not installed, incorrect COM port, Wi-Fi issues.Install CH340 driver, select correct COM port, ensure stable Wi-Fi connection.
Engraving quality is poor or inconsistentIncorrect speed/power settings, material not flat, loose X/Y axis.Adjust speed and power settings, ensure material is flat and secure, tighten eccentric nuts if axes are loose.
Машин нь ер бусын дуу чимээ гаргадагLoose components, debris in moving parts.Inspect and tighten all screws, clean guide rails, lubricate moving parts.

7. Техникийн үзүүлэлтүүд

  • Бүтээгдэхүүний хэмжээ: 11.5 x 11.26 x 6.5 инч
  • Загварын дугаар: RAY5 Mini
  • Лазерын хүч: 3.5 Вт
  • Сийлбэрийн талбай: 140x130 мм
  • Сийлбэрийн хурд: 12,000 мм/мин хүртэл
  • Лазер цэгийн хэмжээ: 0.04 мм x 0.04 мм
  • Холболт: USB, Wi-Fi, APP
  • Дэмжигдсэн програм хангамж: LaserGRBL, LightBurn
  • Барааны жин: 5.15 фунт
  • Үйлдвэрлэгч: УДААН

8. Баталгаат хугацаа ба дэмжлэг

Longer provides comprehensive support for your RAY5 Mini Laser Engraver.

  • Баталгаат хугацаа: Please refer to the official Longer webбаталгааны дэлгэрэнгүй мэдээллийг авахын тулд вэбсайт эсвэл худалдан авалтын баримт бичгээс үзнэ үү.
  • Техникийн дэмжлэг: Lifetime technical support is available. Contact Longer customer service for assistance with any issues or questions.
  • Холбоо барих: Тусламж авахыг хүсвэл зочилно уу Longer Official Store on Amazon or refer to the contact information in your product packaging.

Холбогдох баримт бичиг - RAY5 Mini 3.5W

Урьдчилсанview LONGER RAY5 Лазер зүсэгч ба сийлбэр: Материалын тохиргооны гарын авлага
5W, 10W, 20W загваруудыг багтаасан LONGER RAY5 цувралын лазер зүсэгч, сийлбэрчдэд зориулсан материалын цогц тохиргоо. Энэхүү гарын авлага нь өргөн хүрээний материалын зузаан, хүч, мөчлөг зэрэг сийлбэр болон зүсэх параметрүүдийг санал болгож байна.
Урьдчилсанview LONGER RAY5 Laser Engraver Material Settings Guide
A comprehensive guide to material settings for LONGER RAY5 5W and 10W laser engravers, detailing optimal power, speed, and cycle settings for engraving and cutting various materials.
Урьдчилсанview LONGER Laser B1 Engraver Quick Start Guide (20W/30W)
Comprehensive quick start guide for the LONGER Laser B1 engraver (20W/30W). Covers essential safety information, laser class definitions, parts identification, packing list, and detailed step-by-step installation instructions.
Урьдчилсанview LONGER RAY5 Mini Laser Engraver Material Settings (2.5W & 3.5W)
Comprehensive material parameter guide for LONGER RAY5 Mini 2.5W and 3.5W laser engravers, covering engraving and cutting settings for various materials.
Урьдчилсанview LONGER RAY5 20W Laser Engraver Quick Start Guide and Installation
Comprehensive quick start guide for the LONGER RAY5 20W laser engraver, covering safety precautions, packing list, introduction to components, and step-by-step installation instructions.
Урьдчилсанview LENGER RAY5 20W лазер сийлбэрийн хурдан эхлүүлэх гарын авлага
This quick start guide provides essential information for setting up and safely operating the LONGER RAY5 20W laser engraver. Learn about laser safety, assembly steps, packing contents, and initial adjustments.