NOVSIGHT X Series LED Fog Light Instruction Manual

1. Танилцуулга

Thank you for choosing the NOVSIGHT X Series LED Fog Light. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new LED fog lights. Please read this manual thoroughly before use and retain it for future reference.

Image: NOVSIGHT X Series LED Fog Light with Amber Cover.

2. Бүтээгдэхүүний онцлог

• Enhanced Vehicle Appearance: The unique X-line design not only improves vehicle aesthetics but also provides clear road illumination.
• Exceptional Lighting Performance: Delivers powerful brightness for clear visibility in challenging conditions such as night, rain, or fog. Illuminates dark off-road trails, enhancing night driving safety.
• Wide-Angle Off-Road Illumination: Designed for broad coverage, providing extensive illumination and comprehensive visibility for safe and exhilarating off-road adventures.
• Усны хамгаалалттай, бат бөх барилга байгууламж: Features an IP68 waterproof rating, ensuring reliable performance in harsh environments and all off-road challenges.
• Хялбар суурилуулалт: Includes a removable amber cover for enhanced safety in adverse weather and a plug-and-play wiring harness for straightforward setup and immediate use.

3. Багцын агуулга

Доор жагсаасан бүх зүйл таны багцад байгаа эсэхийг шалгана уу.

• Pod Light x 2
• Wiring Harness x 1 set
• Халив x 1
• Standing Bracket x 2
• Big Screw x 2
• Big Spacer x 2
• Cover (Amber) x 2
• X 4 шураг
• Залгуур х 4
• Самар x 2
• Big Screw Washer x 2
• Screw Washer x 4

Image: All components included in the NOVSIGHT X Series LED Fog Light package.

4. Техникийн үзүүлэлтүүд

Image: Detailed product dimensions and specifications for the NOVSIGHT X Series LED Fog Light.

5. Тохиргоо ба суурилуулалт

Follow these steps to install your NOVSIGHT X Series LED Fog Lights:

1. Step 1: Prepare and Mount the Lights
   Ensure all accessories are present. Install the pod light at your desired location on the vehicle using the provided brackets and hardware. Securely fasten all screws and nuts.
2. Step 2: Identify Wiring Harness Connections
   Locate the four different color link wires at the end of the wiring harness. Confirm that the harness insulation is intact and ready for connection.
3. Step 3: Connect Link Wires
   Connect and match the four color link wires. Each color corresponds to a different light type (e.g., amber, white DRL, main light). Ensure proper connections for correct functionality.
4. Алхам 4: Цахилгаан хангамжид холбоно уу
   Install the link wires to the positive (+) and negative (-) terminals of your vehicle's power supply (battery). Pay close attention to the color coding and polarity of the wires to prevent damage.
5. Алхам 5: Үйл ажиллагааг турших
   After installation, check if the light turns on normally. Verify that the light type control button functions correctly and switches between the different light modes as expected.

6. Ашиглалтын заавар

Your NOVSIGHT X Series LED Fog Lights are designed for ease of use. Once installed, operate them as follows:

1. Асаах/унтраах: Use the designated control button on the wiring harness to turn the lights on or off.
2. Гэрлийн горимыг солих: Press the mode selection button to cycle through the available light types: Amber DRL, Main Light (White), and White DRL. The lights will change accordingly.

Image: Comparison of amber (1700K) and white (6000K) light modes.

Image: Control button for switching between amber, main, and white DRL modes.

7. Засвар үйлчилгээ

To ensure the longevity and optimal performance of your NOVSIGHT X Series LED Fog Lights, follow these maintenance guidelines:

• Тогтмол цэвэрлэгээ: Clean the light lenses and housing periodically with a soft cloth and mild soap solution. Avoid abrasive cleaners that could scratch the lens.
• Утасыг шалгах: Regularly check the wiring harness for any signs of wear, fraying, or damage. Ensure all connections remain secure.
• Шалгах суурилуулалт: Periodically inspect the mounting brackets and hardware to ensure they are tight and secure. Re-tighten if necessary.
• Өндөр даралттай угаалгын машинаас зайлсхий: While the lights are waterproof, avoid directing high-pressure water jets directly at the light housing or wiring connections, as this could potentially compromise seals over time.

8. Алдаа засах

If you encounter issues with your NOVSIGHT X Series LED Fog Lights, refer to the following common troubleshooting steps:

• Гэрэл асахгүй байна:
  Боломжит шалтгаан: Loose wiring connection or no power.
  Шийдэл: Check all wiring connections, especially to the vehicle's battery. Ensure the battery has sufficient charge. Verify the fuse in the wiring harness is not blown.
• Incorrect Light Mode:
  Боломжит шалтгаан: Incorrect wiring of the color-coded link wires.
  Шийдэл: Review Step 3 of the installation instructions and ensure the link wires are correctly matched to their corresponding light types.
• Анивчих гэрэл:
  Боломжит шалтгаан: Unstable power supply or loose connection.
  Шийдэл: Check battery terminals for corrosion and ensure they are tight. Inspect all wiring for secure connections and proper insulation.
• Water Inside Lens:
  Боломжит шалтгаан: Damage to the housing or seals.
  Шийдэл: Although rated IP68, extreme conditions or physical damage can compromise seals. If water ingress occurs, contact customer support.

If these steps do not resolve the issue, please contact NOVSIGHT customer support for further assistance.

9. Баталгаат хугацаа ба дэмжлэг

Your NOVSIGHT X Series LED Fog Light comes with a Үйлдвэрлэгчийн хоёр жилийн баталгаа худалдан авсан өдрөөс. Энэхүү баталгаа нь ердийн ашиглалтын үед хийгдсэн материал, хийцийн согогийг хамарна.

Баталгаат үйлчилгээнд хамаарахгүй:

• Буруу суурилуулалт эсвэл буруу ашигласнаас үүдэлтэй гэмтэл.
• Damage caused by accidents, abuse, or neglect.
• Хэвийн элэгдэл.
• Зөвшөөрөлгүй засвар, өөрчлөлт.

For warranty claims or technical support, please contact NOVSIGHT customer service through your retailer or the official NOVSIGHT website. Please have your proof of purchase and product model information ready.