Junsun JS-US-SUB1206

Junsun 12-inch 800W Powered Spare Tire Car Subwoofer User Manual

Model: JS-US-SUB1206

1. Танилцуулга

Thank you for choosing the Junsun 12-inch 800W Powered Spare Tire Car Subwoofer. This product is designed to enhance your vehicle's audio system by delivering powerful, distortion-free bass. Its innovative hidden spare tire design allows for discreet installation, saving valuable trunk space and offering an anti-theft benefit. This manual provides essential information for safe installation, operation, and maintenance of your subwoofer.

2. Аюулгүй байдлын мэдээлэл

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in serious injury or damage to the product or vehicle.

  • Цахилгаан угсралтыг эхлүүлэхийн өмнө тээврийн хэрэгслийн сөрөг батерейны терминалыг үргэлж салгаж байгаарай.
  • Ensure proper grounding of the subwoofer to the vehicle chassis.
  • Use appropriate gauge wiring as specified in the installation section to prevent overheating and electrical hazards.
  • Do not install the subwoofer in a location that obstructs the driver's view эсвэл тээврийн хэрэгслийн ажиллагаанд саад учруулж байна.
  • Сабвуферийг чийг эсвэл хэт өндөр температурт өртөхөөс зайлсхий.
  • Хэрэв та суулгах процессын аль нэг хэсэгт эргэлзэж байвал мэргэжлийн туслалцаа аваарай.

3. Багцын агуулга

Суулгацыг үргэлжлүүлэхийн өмнө багцад бүх зүйл байгаа эсэхийг шалгаарай.

  • Spare tire active subwoofer (1 pc)
  • Owner's Manual (English) (1 pc)
  • Screw with nut (M6x200mm) (1 pc)
  • Plug and play wire harness & Signal line (1 pc)
  • Алсын удирдлага (1 ширхэг)
Image showing all components included in the Junsun 12-inch 800W Powered Spare Tire Car Subwoofer package, including the subwoofer unit, various wiring harnesses, a remote control, and mounting hardware.

Figure 3.1: Included Components and Wiring Kit

4. Бүтээгдэхүүний онцлог

  • Powerful Output Performance: This 12-inch powered subwoofer delivers 800W peak power and 220W RMS power, ensuring powerful, distortion-free bass.
  • Innovative Hidden Spare Tire Design: Fits perfectly into your vehicle's spare tire well, saving trunk space and offering an anti-theft benefit due to its concealed nature.
  • All-in-One Plug & Play Solution: Integrates the subwoofer, built-in amplifier, and enclosure, and comes with a full wiring kit, simplifying installation.
  • Professional Sound Tuning Controls: Fine-tune your sound precisely via the onboard controls or included wired remote, adjusting the Low-Pass Filter (LPF), Gain, and Bass Boost.
  • Тээврийн хэрэгслийн өргөн нийцтэй байдал: Supports both high-level speaker wire input and RCA low-level input with auto turn-on functionality, integrating with most factory and aftermarket stereos.
  • Durable Cast Aluminum Enclosure: Built with a high-strength cast aluminum enclosure for robust durability, corrosion resistance, and superior heat dissipation.
  • Multi-Layered Protection Circuitry: Equipped with built-in triple protection against overheating, overload, and short circuits.
Image showing the Junsun subwoofer discreetly installed within a vehicle's spare tire well, demonstrating its hidden design.

Figure 4.1: Hidden Spare Tire Design

Image illustrating the 800W peak power output of the subwoofer, along with visuals of the wired remote controller and overload protection features.

Figure 4.2: Power and Control Features

5. Техникийн үзүүлэлтүүд

Image displaying the control panel features, detailed specifications, and a list of contents for the Junsun subwoofer.

Figure 5.1: Panel Features and Specifications

ОнцлогҮнэ цэнэ
Загварын нэрJS-US-SUB1206
Чанга яригчийн төрөлСабвуфер
RMS цахилгаан220 Вт
MAX хүч800 Вт
THD<1.0%
Дуу шуугианы харьцаа>91дБ
Давтамжийн хариу үйлдэл20 Гц-150 Гц
Input Sensitivity (High Level)1V
Input Sensitivity (Low Level)0.4 В
Бага нэвтрүүлэх шүүлтүүр50 Гц-150 Гц
Басс өсөлт0-ээс + 12dB хүртэл
Дуут шүүлтүүр20 Гц
Гал хамгаалагчийн үнэлгээ30 А
Сабвуферийн диаметр12 инч
Бүтээгдэхүүний хэмжээс2.95"D x 10.24"W x 13.58"H
МатериалХөнгөн цагаан

6. Суурилуулалт

The Junsun subwoofer is designed for straightforward installation. It can be placed in the spare tire well of most vehicles. Follow these general steps for installation:

  1. Машинаа бэлтгэх: Disconnect the negative terminal of your car battery. Locate your spare tire well.
  2. Сабвуфер суурилуулах: Place the subwoofer securely in the spare tire well. Use the provided screw and nut to fasten it if your vehicle's spare tire mounting system allows.
  3. Цахилгааны утас: Run the power wire from the subwoofer to the car's battery. Ensure the wire is properly routed and protected from sharp edges or moving parts. Connect the inline fuse holder close to the battery.
  4. Газардуулгын утас: Connect the ground wire from the subwoofer to a clean, unpainted metal surface on the vehicle chassis. Ensure a solid connection for optimal performance and safety.
  5. Дохионы оролт: Connect the signal wires from your car's head unit to the subwoofer. You can use either high-level speaker wire inputs or RCA low-level inputs, depending on your head unit's capabilities.
  6. Алсын удирдлагатай асаалт: Connect the remote turn-on wire to a switched 12V source from your head unit (e.g., amplifier remote output).
  7. Алсын удирдлагатай холбох: Attach the included wired remote control to the subwoofer. Route the cable to a convenient location for easy access while driving.
  8. Эцсийн шалгалтууд: Double-check all connections for security and proper polarity. Reconnect the negative battery terminal.
Image showing the Junsun subwoofer placed inside a car's spare tire compartment, with some wiring visible, illustrating the hidden installation concept.

Figure 6.1: Subwoofer Placement in Spare Tire Well

Image depicting a detailed wiring diagram for the Junsun subwoofer, showing connections for power, ground, signal inputs, and remote turn-on.

Зураг 6.2: Утасны диаграм

7. Үйл ажиллагаа

Once installed, you can control and fine-tune your subwoofer using the wired remote control.

7.1 Утастай Алсын Удирдлага

The remote control allows you to adjust key settings for optimal bass performance:

  • Gain Control (MIN/MAX): Adjusts the overall output level of the subwoofer. Start with a low setting and gradually increase until the desired bass level is achieved without distortion.
  • Bass Boost (0dB/6dB/12dB): Provides an additional boost to low frequencies. Use sparingly to avoid over-driving the subwoofer.
  • Low-Pass Filter (LPF) (30Hz-150Hz): Controls the upper frequency limit of the subwoofer. Set this to blend smoothly with your main speakers.
  • Phase Switch (0°/180°): Сабвуферын гаралтын фазыг тохируулна. Үндсэн чанга яригчтайгаа хамгийн нягт басс хариу үйлдэл үзүүлдэг тохиргоог олохын тулд хоёр тохиргоог туршиж үзээрэй.
Image of the wired remote control for the Junsun subwoofer, showing its various knobs for gain, bass boost, LPF, and phase adjustment.

Figure 7.1: Wired Remote Control

8. Засвар үйлчилгээ

To ensure the longevity and optimal performance of your Junsun subwoofer, follow these maintenance guidelines:

  • Цэвэрлэгээ: Use a soft, dry cloth to clean the exterior of the subwoofer. Do not use harsh chemicals or abrasive cleaners.
  • Агааржуулалт: Ensure that the subwoofer's enclosure has adequate airflow, especially if it's installed in a confined space. Proper ventilation helps dissipate heat and prevents overheating.
  • Утасны үзлэг: Periodically check all wiring connections for tightness and signs of wear or corrosion. Loose connections can lead to poor performance or electrical issues.
  • Гал хамгаалагч солих: If the fuse blows, replace it only with a fuse of the same type and rating (30A). Never use a higher-rated fuse or bypass the fuse, as this can cause serious damage or fire.

9. Алдаа засах

If you experience operation or performance problems with this product, compare your installation with the electrical wiring diagram and review дараах алдааг олж засварлах зөвлөмжүүд.

Image of a troubleshooting table for the Junsun subwoofer, listing common symptoms like amplifier not powering up, protection LED, high hiss, squealing noise, distorted sound, amplifier getting hot, engine noise (static), and engine noise (alternator whine), along with possible remedies for each.

Figure 9.1: Troubleshooting Guide (Part 1)

Image of a troubleshooting table for the Junsun subwoofer, continuing from the previous section, providing remedies for issues like high hiss, squealing noise, distorted sound, amplifier getting hot, engine noise (static), and engine noise (alternator whine.

Figure 9.2: Troubleshooting Guide (Part 2)

10. Баталгаат хугацаа ба хэрэглэгчийн дэмжлэг

Junsun prioritizes your satisfaction. This subwoofer comes with a 3-year replacement warranty.

For any questions or support during your audio upgrade journey, our dedicated customer service team is available 24/7 to assist you.

10.1 Дэмжлэгтэй хэрхэн холбогдох вэ

You can typically find contact information for Junsun customer support through the retailer where you purchased the product or on the official Junsun webсайт.

Image showing steps to contact Junsun Car Electronics customer support, indicating where to find the seller information and an 'Ask a question' button on a retail platform.

Зураг 10.1: Харилцагчийн дэмжлэгийн мэдээлэл