DURATECH 20V 18GA Cordless Brad Nailer and Staple Gun Instruction Manual

1. Аюулгүй байдлын мэдээлэл

WARNING: Always read and understand all safety warnings and instructions before operating this tool. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Энэ бүтээгдэхүүнийг ажиллуулахдаа хамгаалалтын шил эсвэл хажуугийн бамбай бүхий хамгаалалтын шил зүүж, шаардлагатай бол нүүрээ бүрэн хамгаалаарай.
• To avoid accidental firing, keep fingers AWAY from triggers when not driving fasteners.
• Do not alter or remove triggers.
• NEVER point the tool at yourself or others in the work area when connecting the battery and when using or handling the tool. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• To avoid battery over-discharge and potential damage, recharge the device at least once every three months.

2. Бүтээгдэхүүн дууссанview

Багцын агуулга

• Утасгүй Брэд Найлер
• 1000pcs 1-1/4" Staples
• 1000pcs 1-9/16" Nails
• 2.0Ah ли-ион батерей
• 1 цагийн хурдан цэнэглэгч
• Зөөврийн цүнх
• Зааварчилгааны гарын авлага

Хэрэгслийн бүрэлдэхүүн хэсгүүд

Figure 1: Labeled components of the DURATECH 20V 18GA Cordless Brad Nailer.

Хэмжээ ба жин

Figure 2: Physical dimensions and weight of the nailer (without battery).

• Урт: 10.83 инч (27.5 см)
• Өргөн: 9.45 инч (24 см)
• Weight: 6.19 lbs (without battery)

3. Тохиргоо

Батерей суурилуулах

1. Ensure the battery is fully charged using the provided 1-hour quick charger.
2. Align the battery with the battery slot on the tool.
3. Батерейг үүрэнд нь шургуулж, байрандаа найдвартай ор.

Loading Fasteners (Nails/Staples)

Figure 3: Steps for inserting staples or nails into the magazine.

1. Суллах товчийг дараад сэтгүүлийн тагийг гарга.
2. Tilt the tool and place nails/staples into the track of the magazine channel. Ensure the fastener points are placed against the bottom of the magazine.
3. Сэтгүүлийн тагийг суллах товчлууртай тултал хаа.

Хумс Viewer Цонх

хадаас viewer window allows you to quickly check the fastener level. When the window shows улаан, it indicates the magazine is without nails. When it shows хар, it indicates the magazine contains nails.

4. Ашиглалтын заавар

Гал асаах горимууд

The nail gun features two firing modes: Single Firing Mode and Contact Firing Mode. Select the desired mode using the switch located near the LED indicator.

Зураг 4: Гал асаах горим сонгох унтраалга.

Ганц гал асаах горим

• Shift the mode switch to the зүүн тал (single firing icon).
• Depress the contact pin against the workpiece.
• Squeeze the trigger to fire a single fastener.

Гал асаах горимтой холбоо барина уу

• Shift the mode switch to the баруун тал (contact firing icon).
• Гохыг дар.
• Depress the contact pin against the workpiece to fire fasteners continuously as the tool is moved along the surface.

Жич: If the contact pin is not depressed against the workpiece before squeezing the trigger (in single firing mode) or if the trigger is not squeezed before depressing the contact pin (in contact firing mode), the nail gun will not shoot fasteners due to the safety protection device.

Гүн тохируулга

Adjust the fastener driving depth using the depth adjustment wheel located near the contact pin. Turning the wheel allows you to set the desired depth for various materials and applications.

Figure 5: Depth adjustment wheel.

LED гэрэлтүүлэг

The tool is equipped with LED lights on both sides to illuminate the work area, which is particularly useful in low-light conditions. The LED lighting can be activated via the LED Lighting & Indicator Switch.

Figure 6: LED lighting for the work area.

LED үзүүлэлт

The LED indicator provides visual feedback on the tool's status:

Figure 7: LED indicator and its meanings.

• Улаан асаалттай: Батерей бага.
• Улаан анивчдаг: Nails/staples are jammed.
• Ногоон асаалттай: No nails/staples in the magazine.
• Ногоон анивчих: Хэт халалт.
• Гэрэл унтраалттай: Хэвийн ажиллагааны төлөв.

Бүтээгдэхүүний албан ёсны видео

Video 1: This official video demonstrates the product's features, including loading fasteners, LED indicators, firing modes, and depth adjustment.

5. Засвар үйлчилгээ

Clearing Jammed Fasteners

If the LED indicator turns red and flashes, it signifies that nails/staples are jammed. Follow these steps to clear the jam:

Figure 8: Quick Release Mechanism.

1. Remove the battery from the tool to prevent accidental firing.
2. Open the magazine using the quick release mechanism.
3. Carefully remove any jammed nails or staples from the magazine channel. A small tool like a screwdriver may be used to assist, but ensure it does not damage the tool.
4. Close the magazine and reinsert the battery.

Батерейны арчилгаа

• Always use the provided DURATECH 20V Li-ion battery and charger.
• Recharge the battery at least once every three months to prevent over-discharge and potential damage, even if not in use.
• Батерейг нарны шууд тусгал, хэт температураас хол, сэрүүн, хуурай газар хадгална.

6. Алдаа засах

Refer to the LED Indicator section (Section 4) for common issues and their corresponding indicator lights. If the issue persists after following the recommended steps (e.g., clearing jams, recharging battery), please contact customer support.

7. Техникийн үзүүлэлтүүд

Тохиромжтой бэхэлгээ

Figure 9: Compatible nail and staple types.

8. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official DURATECH website. Ensure you have your model number (024009) and purchase details available when contacting support.