Aninerel 3000W Hybrid Solar Inverter ANJ-3KW-LV-WIFI User Manual

1. Танилцуулга

This manual provides essential instructions for the installation, operation, and maintenance of your Aninerel 3000W Hybrid Solar Inverter, model ANJ-3KW-LV-WIFI. This device is designed to convert 24V DC power to 110V AC pure sine wave power, suitable for various off-grid and backup power applications. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

Зураг 1.1: Урд view of the Aninerel 3000W Hybrid Solar Inverter. The inverter features a blue casing with the Aninerel logo and a central LCD display panel with control buttons.

2. Аюулгүй ажиллагааны заавар

Цахилгаан цочрол, гал түймэр, гэмтлийн эрсдлийг бууруулахын тулд дараах аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг үргэлж дагаж мөрдөөрэй.

• Read all instructions and cautionary markings on the unit and in this manual before installation or operation.
• Do not disassemble the inverter. Refer servicing to qualified personnel. Incorrect reassembly may result in electric shock or fire.
• Цахилгаанд цохиулах эрсдэлийг бууруулахын тулд засвар үйлчилгээ хийх, цэвэрлэхээс өмнө бүх утсыг салга.
• This inverter is designed for indoor or semi-outdoor use with an IP65 rating. Avoid direct exposure to rain or snow.
• Хэт халалтаас урьдчилан сэргийлэхийн тулд инвертерийн эргэн тойронд агааржуулалтыг зөв хий. Агааржуулалтын нүхийг бүү бөглө.
• Суурилуулалтын явцад зохих багаж хэрэгсэл, хувийн хамгаалалтын хэрэгслийг ашигла.
• Ensure all wiring connections are tight and secure to prevent loose connections that can cause overheating.
• Do not connect the inverter to a public utility grid without proper authorization and safety measures.

3. Бүтээгдэхүүн дууссанview

The Aninerel 3000W Hybrid Solar Inverter integrates a pure sine wave inverter, an MPPT solar charge controller, and a battery charger into one compact unit. It is designed to provide uninterrupted power support.

3.1 Гол онцлогууд

• 3000W Pure Sine Wave Output: Converts 24V DC to 110V AC, providing stable power for sensitive electronics.
• Integrated 100A MPPT Solar Charge Controller: Maximizes solar energy harvesting with up to 500VDC PV input.
• Flexible Charging and Output Modes: Offers multiple modes (Solar Only, AC Priority, Hybrid Charging; Mains Priority, PV Priority, Hybrid Output) for diverse power management.
• Өргөн хүрээний батерейны нийцтэй байдал: Supports AGM, GEL, Lead-acid, Li-ion, and LiFePO4 24V batteries.
• Ухаалаг LCD дэлгэц: Provides real-time monitoring and allows for easy configuration of system settings.
• Баригдсан Wi-Fi: Enables remote monitoring of the inverter status (registration required).
• Бат бөх дизайн: IP65-rated enclosure for durability in various environments, with intelligent cooling.
• Цогц хамгаалалтууд: Overvol орноtage, undervoltage, reverse polarity, and short circuit protection.

Зураг 3.1: Урд болон хойд самбарview. This diagram labels the LCD display, indicators, function buttons, RS485 communication port, grounding terminal, battery input, dry contact port, built-in Wi-Fi, AC input, AC output, PV input, and power on/off switch.

3.2 Урд самбар ба үзүүлэлтүүд

• LCD дэлгэц: Shows system status, operational data, and configuration settings.
• Цэнэглэх үзүүлэлт: Illuminates to indicate battery charging status.
• Статусын үзүүлэлт: Provides general operational status of the inverter.
• Гэмтлийн үзүүлэлт: Lights up to signal system errors or warnings.
• Function Buttons (ESC, UP, DOWN, ENTER): Used for navigating menus and adjusting settings on the LCD.

3.3 Арын самбарын холболтууд

• RS485 холбооны порт: For external communication and monitoring.
• Газардуулгын терминал: Essential for safety grounding.
• Зайны оролт: Connects to the 24V battery bank.
• Хуурай холбоо барих порт: Гадаад удирдлага эсвэл дохиоллын зориулалттай.
• Built-in Wi-Fi Module: For wireless monitoring.
• Хувьсах гүйдлийн оролт: Connects to grid utility or generator AC power.
• AC гаралт: Өрхийн ачаалалтай холбогддог.
• PV оролт: Нарны хавтангийн массивуудтай холбогддог.
• Асаах/унтраах унтраалга: Controls the main power to the inverter.

4. Суулгалт ба тохиргоо

Proper installation is crucial for the safe and efficient operation of your hybrid solar inverter. Ensure all connections are made by a qualified electrician and adhere to local electrical codes.

4.1 Инвертер суурилуулах

• Хуурай, агааржуулалт сайтай, нарны шууд тусгал болон чийгнээс хамгаалагдсан тохиромжтой газрыг сонгоорой.
• Агаарын урсгал болон хөргөлтийг зөв хийхийн тулд инвертерийн эргэн тойронд хангалттай зай гаргах хэрэгтэй.
• Mount the inverter vertically on a sturdy surface using appropriate fasteners.

4.2 утас холболт

Follow the wiring diagram carefully. All wiring should be performed with the inverter and all power sources disconnected.

Figure 4.1: Solar System Connection Diagram. This diagram illustrates the connections for solar panels, generator, utility grid, 24V battery, and household loads to the inverter. It shows the PV input, battery input, AC input, and AC output terminals.

4.2.1 Зайны холболт

• Connect the 24V battery bank to the battery input terminals on the inverter. Ensure correct polarity (+ to + and - to -).
• Use appropriate cable gauges for the battery connections to handle the expected current.
• The ANJ-3KW-LV-WIFI model supports a 24-volt DC system and is recommended for use with batteries of at least 100 ampere-hours capacity.

Figure 4.2: Inverter Battery Connection. This diagram shows wiring configurations for both 12-volt and 24-volt battery systems, emphasizing correct series/parallel connections for the desired voltage.

4.2.2 Нарны хавтан (нарны хавтан) холболт

• Connect the solar panel array to the PV input terminals. Observe correct polarity.
• Ensure the total open circuit voltage of the PV array does not exceed 500VDC.
• The MPPT voltage range is 60-450VDC. Ensure your PV array voltage falls within this range for optimal charging.

4.2.3 Хувьсах гүйдлийн оролтын холболт

• Connect the utility grid or generator AC power to the AC input terminals.
• The inverter supports 110/120VAC input with auto-sensing frequency (50/60Hz).

4.2.4 Хувьсах гүйдлийн гаралтын холболт

• Connect your household loads or appliances to the AC output terminals.
• The inverter provides 3000W continuous AC output at 110/120VAC.

4.3 Анхдагч асаалт

• After all connections are secure, switch on the battery breaker first.
• Then, switch on the PV array breaker (if applicable).
• Finally, switch on the AC input breaker (if applicable) and the inverter's main power switch.
• Observe the LCD display for initial boot-up and status indicators.

5. Үйл ажиллагаа

The inverter offers various configurable settings to optimize power management based on your specific needs.

5.1 LCD дэлгэц болон тохиргоо

The LCD display provides real-time information and allows you to configure operational parameters using the function buttons.

• -г ашиглана уу UP болон ДООШ цэсний сонголтуудаар шилжих товчлуурууд.
• дарна уу ENTER сонголтыг сонгох эсвэл тохиргоог баталгаажуулна уу.
• дарна уу ESC to exit a menu or cancel an action.

5.2 Charging Priority Modes

Эдгээр тохиргоо нь батерейны банкийг боломжтой эрчим хүчний эх үүсвэрээс хэрхэн цэнэглэхийг тодорхойлдог.

Figure 5.1: Charger Source Priority. This diagram illustrates three charging priority options: Solar First (solar panels charge first, AC input only if solar is unavailable), Solar and AC Input Simultaneously (both solar and utility charge at the same time), and Solar Only (solar energy is the exclusive charging source).

• Нарны нэгдүгээрт: Prioritizes solar power for charging. AC input will only charge the battery when solar power is insufficient or unavailable.
• AC Priority (Utility Priority): Prioritizes AC input (utility or generator) for charging. Solar power will supplement or take over if AC input is unavailable.
• Зөвхөн нарны: The inverter will only charge the battery bank from solar power. AC input will not be used for charging.

5.3 Output Priority Modes

These settings determine the power source for your connected loads.

Figure 5.2: Output Source Priority. This diagram shows three output priority options: Solar First (power from solar first, AC input supplements if solar is insufficient), AC First (redirects AC input to power loads, uses solar/batteries when AC is unavailable), and DC Priority (prioritizes solar first, then battery, then AC input only when voltage drops to a programmable value).

• Solar First (PV Priority): Prioritizes solar power to supply loads. If solar power is insufficient, the battery bank will supplement, and then AC input will be used.
• AC First (Mains Priority): Prioritizes AC input (utility or generator) to power loads. If AC input is unavailable, the inverter will switch to battery power.
• DC Priority (Battery Priority): Prioritizes solar power first, then battery power. AC input will only engage when the battery voltage drops below a programmable threshold.

5.4 Wi-Fi Monitoring

The built-in Wi-Fi module allows for remote monitoring of your inverter's performance and status via a dedicated application. Registration may be required to access this feature.

Figure 5.3: Wi-Fi Monitoring. This image depicts a user monitoring the hybrid inverter's status wirelessly via a smartphone application, highlighting the convenience of the built-in Wi-Fi feature.

6. Засвар үйлчилгээ

Regular maintenance helps ensure the longevity and optimal performance of your Aninerel Hybrid Solar Inverter.

• Цэвэрлэгээ: Инвертерийн гадна талыг хуурай даавуугаар үе үе цэвэрлэж байгаарай. Агааржуулалтын нүхнүүд нь тоос шороо, хог хаягдлаас цэвэрлэгдсэн эсэхийг шалгаарай.
• Холболтууд: Annually check all electrical connections (battery, PV, AC input/output) for tightness and corrosion. Tighten any loose connections.
• Байгаль орчин: Суурилуулалтын орчин нь тогтоосон температур болон чийгшлийн хязгаарт байгаа эсэхийг шалгаарай.
• Програм хангамж: Үйлдвэрлэгчийг шалгана уу webсайжруулсан гүйцэтгэл эсвэл шинэ функцуудын хувьд боломжтой програм хангамжийн шинэчлэлтүүдийг үзэх сайт.

7. Алдаа засах

Энэ хэсэг нь танд тулгарч болох нийтлэг асуудлуудын шийдлүүдийг өгдөг. Хэрэв асуудал хэвээр байвал хэрэглэгчийн тусламжтай холбогдоно уу.

8. Техникийн үзүүлэлтүүд

Technical specifications for the Aninerel 3000W Hybrid Solar Inverter ANJ-3KW-LV-WIFI:

9. Баталгаат хугацаа ба дэмжлэг

For warranty information, please refer to the warranty card included with your product or visit the official Aninerel website. For technical support, troubleshooting assistance, or service inquiries, please contact Aninerel customer service through their official channels.

Manufacturer: Shenzhen Anenji Energy Technology Co.,Ltd