plplaaoo WT87B Bluetooth Digital Anemometer Instruction Manual

1. Танилцуулга

The plplaaoo WT87B Bluetooth Digital Anemometer is a high-precision handheld device designed for measuring wind speed and temperature. It features an LCD backlight display for clear readings in various lighting conditions, Bluetooth and USB connectivity for data transmission, and a durable ABS plastic construction suitable for outdoor use. This manual provides detailed instructions for the proper setup, operation, and maintenance of your anemometer.

2. Аюулгүй байдлын мэдээлэл

• Төхөөрөмжийг ашиглахаасаа өмнө бүх зааврыг анхааралтай уншина уу.
• Do not attempt to disassemble or modify the anemometer, as this may void the warranty and cause damage.
• Төхөөрөмжийг хэт өндөр температур, нарны шууд тусгал болон идэмхий шингэнээс хол байлга.
• Ensure the battery is inserted correctly according to polarity markings.
• Ашигласан батерейг орон нутгийн дүрэм журмын дагуу хариуцлагатайгаар устгана уу.

3. Багцын агуулга

Дараах зүйлсийн багцад байгаа эсэхийг шалгана уу.

• plplaaoo WT87B Digital Anemometer
• Даавуун цүнх
• Олс өлгөх
• USB кабель
• Хэрэглэх заавар (энэ баримт бичиг)

Note: A 9V battery (6F22 type) is required but not included in the package.

4. Бүтээгдэхүүн дууссанview

The WT87B anemometer is designed for ease of use and accurate measurements. Below are key components and features:

Зураг 4.1: Урд view of the anemometer, highlighting the wind impeller and LCD display.

Зураг 4.2: Дээрээс доош view of the anemometer, illustrating the button layout for various functions.

Гол онцлогууд:

• High-precision wind speed measurement (0-30m/s)
• Real-time, average, maximum, and minimum wind speed readings
• LCD backlight display for readability
• Bluetooth and USB connectivity for data transmission
• Unit switching (m/s, km/h, ft/min, knots, mph)
• Мэдээллийг хадгалах функц
• LED гэрлийн функц

5. Тохиргоо

5.1 Батерей суурилуулах

1. Locate the rear power cover on the back of the anemometer.
2. Disassemble the rear power cover by sliding or unscrewing it.
3. Insert one 9V (6F22 type) battery into the battery compartment, ensuring correct polarity.
4. Close the power cover tightly.

Зураг 5.1: Illustration of the anemometer, including a visual guide for battery installation and button functions.

6. Ашиглалтын заавар

6.1 Асаах/Унтраах болон арын гэрэлтүүлэг

• Төхөөрөмжийг асаахын тулд улаан асаах товчийг дарна уу (LED button). The display will show the current ambient wind speed and temperature.
• To turn on the LCD backlight, press the power button again briefly.
• To power off, press and hold the red power button.

6.2 Wind Speed Measurement Modes

• Бодит цагийн хэмжилт: The device displays the current wind speed by default after power-on.
• Maximum/Minimum/Average Measurement: дээр дарна уу UP/MIN/MAX button to cycle through maximum, minimum, and current wind speed display modes.
• Average Wind Speed: дээр дарна уу VEL/AVG button to measure and display the average wind speed.

6.3 Нэгж солих

To switch between wind speed units (m/s, km/h, ft/min, knots, mph), press the UNIT/DOWN товч.

6.4 Data Hold and Settings

• дээр дарна уу ТОХИРУУЛАХ/БАРЬЦАХ key to enter the setting menu or to activate the data saving mode (data hold).
• When data hold is active, the displayed reading will be frozen. Press again to release.

6.5 LED гэрлийн функц

дээр дарна уу LIGHT/ENTER key to turn on the integrated LED light or to confirm a function within the settings menu.

6.6 Bluetooth & USB Connectivity

The anemometer supports seamless connection to a mobile phone via Bluetooth or to a computer via USB. This allows for stable and reliable data transmission. Utilize the companion app (if available for your mobile device) to monitor and analyze wind speed data with enhanced functionality.

7. Засвар үйлчилгээ

• Цэвэрлэгээ: Төхөөрөмжийг цэвэрлэхийн тулд зөөлөн, хуурай даавуу ашиглана уу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
• Хадгалах: When not in use for extended periods, remove the battery to prevent leakage. Store the anemometer in a cool, dry place, away from direct sunlight and extreme temperatures.
• Impeller Care: Ensure the wind impeller is free from dust, debris, or obstructions for accurate readings.

8. Алдаа засах

• Төхөөрөмж асахгүй байна: Check if the 9V battery is installed correctly and has sufficient charge. Replace the battery if necessary.
• Буруу уншилтууд: Ensure the impeller is spinning freely and is not obstructed. Verify that the device is held in an open area, away from obstacles that could affect airflow.
• Bluetooth/USB connection issues: Ensure Bluetooth is enabled on your mobile device or that the USB cable is securely connected to your computer. Restart the anemometer and your connecting device if issues persist.
• Дэлгэц бүдэг эсвэл анивчих: Батерей бага байж магадгүй. 9V зайг солих.

9. Техникийн үзүүлэлтүүд

10. Баталгаат хугацааны мэдээлэл

Specific warranty details for the plplaaoo WT87B Digital Anemometer are not provided in the product information. Please refer to the retailer's return policy or contact the manufacturer directly for warranty terms and conditions.

11. Дэмжлэг

For technical assistance, troubleshooting, or further inquiries regarding your plplaaoo WT87B Digital Anemometer, please contact the seller or manufacturer through their official support channels. Refer to your purchase documentation for contact information.