Dioche DC5V Vibration Motor Module Instruction Manual

Танилцуулга

This manual provides detailed instructions for the Dioche DC5V Vibration Motor Module. This module is designed to convert electrical signals into mechanical vibrations, making it suitable for interactive projects, haptic feedback systems, and wearable devices. It features a high-quality 1027 mobile phone vibration motor, offering a strong and noticeable vibration effect.

Зургийн тайлбар: Дээрээс доош view of the Dioche DC5V Vibration Motor Module. The blue circuit board features a circular black vibration motor, resistors, and three connection pins labeled VCC, GND, and IN.

Үзүүлэлтүүд

Зургийн тайлбар: The underside of the Dioche DC5V Vibration Motor Module, showing the blue circuit board with solder points and mounting holes.

Тохиргоо

The Dioche DC5V Vibration Motor Module is designed for straightforward integration into electronic circuits. It typically requires three connections: VCC (power), GND (ground), and IN (signal input).

Pinout

• VCC: Connect to a 3.0V to 5.3V DC power supply. The rated voltage нь 5.0V DC.
• GND: Connect to the ground of your power supply and control circuit.
• IN: Connect to a digital output pin of your microcontroller (e.g., Arduino, Raspberry Pi) to control the vibration.

Холболтын схем Жишээ ньample

Доорх нь эксample of how to connect the module to a microcontroller. Ensure all connections are secure before applying power.

Зургийн тайлбар: Өнцөг view of the Dioche DC5V Vibration Motor Module, clearly showing the three connection pins (VCC, GND, IN) and the vibration motor on the blue circuit board.

Ашиглалтын заавар

The vibration intensity of the motor can be controlled directly through a digital port using Pulse Width Modulation (PWM).

Үндсэн үйл ажиллагаа

1. Асаалттай: Ensure the module is correctly connected to a stable DC power supply within the specified voltage range (3.0V - 5.3V).
2. Дижитал хяналт: Use a digital output pin from your microcontroller to send signals to the 'IN' pin of the module.
3. ХБХ-ны хяналт: To vary the vibration intensity, apply a PWM signal to the 'IN' pin. A higher duty cycle will result in a stronger vibration, while a lower duty cycle will produce a weaker vibration.
4. Асаах / унтраах хяналт: For simple on/off vibration, set the 'IN' pin to HIGH (e.g., 5V) for vibration and LOW (e.g., 0V) to stop vibration.

ExampПрограм

This module is ideal for haptic feedback in gaming controllers, notification alerts in wearable devices, or interactive art installations where tactile feedback is desired.

Зургийн тайлбар: The Dioche DC5V Vibration Motor Module with overlaid text indicating its features: "Obvious vibration effect", "It can be controlled directly through the digital port", and "The vibration intensity of the motor is controlled by PWM".

Засвар үйлчилгээ

The Dioche DC5V Vibration Motor Module is a low-maintenance electronic component. Following these guidelines will help ensure its longevity and reliable performance:

• Хуурай байлга: Avoid exposure to moisture or liquids, which can damage the electronic components.
• Цэвэр байдал: Keep the module free from dust and debris. Use a soft, dry brush or compressed air for cleaning if necessary.
• Болгоомжтой харьц: Avoid dropping or subjecting the module to strong impacts, as this can damage the internal motor or circuit board.
• Зөв хадгалалт: Store the module in a cool, dry place away from direct sunlight and extreme temperatures.

Алдааг олж засварлах

If the vibration module is not functioning as expected, consider the following troubleshooting steps:

• Чичиргээ байхгүй:
  • Check power connections (VCC and GND) to ensure they are secure and providing the correct voltage (3.0V - 5.3V DC).
  • Verify the signal connection to the 'IN' pin. Ensure your microcontroller is sending a HIGH signal or an appropriate PWM signal.
  • Confirm the microcontroller's digital output pin is configured correctly and functioning.
  • Inspect the module for any visible damage or loose components.
• Сул чичиргээ:
  • If using PWM, increase the duty cycle of the PWM signal.
  • Ensure the power supply can deliver sufficient current (rated current 60mA, starting current 90mA).
  • Check for any obstructions preventing the motor from vibrating freely.
• Intermittent Vibration:
  • Check all wiring for loose connections or poor contacts.
  • Цахилгаан хангамж тогтвортой, хэлбэлзэлгүй байгаа эсэхийг шалгаарай.
  • Verify the signal from the microcontroller is consistent.

Баталгаат болон дэмжлэг

Баталгаат хугацаа болон техникийн дэмжлэг авахыг хүсвэл жижиглэнгийн худалдаачин эсвэл үйлдвэрлэгчийн албан тушаалтнаас лавлана уу webсайт. Худалдан авалтын баримтаа худалдан авалтын баталгаа болгон хадгалаарай.

Нэмэлт тусламж авахыг хүсвэл зочилж болно Dioche Store on Amazon.

Зургийн тайлбар: A pack of three Dioche DC5V Vibration Motor Modules, showing them as a complete set for multiple projects.