STM32Cube IoT зангилаа BLE функцийн багц

Үзүүлэлтүүд

• Бүтээгдэхүүний нэр: VL53L3CX-SATEL
• Function Pack: STM32Cube function pack for IoT node BLEconnectivity and time-of-flight sensors (FP-SNS-FLIGHT1)
• Хувилбар: 4.1 (31 оны 2025-р сарын XNUMX)

Техник хангамж дууссанview
The VL53L3CX-SATEL is a breakout board with the VL53L3CX time-of-flight sensor.

Гол онцлогууд

• Arduino UNO R3 холбогч
• Bluetooth бага эрчим хүчний холболтод зориулсан BLUENRG-M2SP
• Санах ойг хадгалах зориулалттай M95640-RMC6TG

Програм хангамжийн тайлбар:
The firmware update (FOTA) feature allows for easy software updates.

Програм хангамжийн шаардлага:
Compatible with STM32 Nucleo development boards, specificallyNUCLEO-F401RE, NUCLEO-L476RG, or NUCLEO-U575ZI-Q.

Нэмэлт мэдээлэл:
For firmware updates, refer to the latest information available at www.st.com.

Бүтээгдэхүүнийг ашиглах заавар

Тохируулах & Демо Examples

Алхам 1: Техник хангамжийн тохиргоо
Connect the VL53L3CX-SATEL breakout board to an STM32 Nucleo development board (NUCLEO-F401RE, NUCLEO-L476RG, or NUCLEO-U575ZI-Q) using the appropriate connectors.

Алхам 2: Програм хангамжийн тохиргоо
Ensure that the necessary software prerequisites are installed on your system as specified in the documentation.

Алхам 3: Демо Examples
Өгөгдсөн демо хувилбарыг үзнэ үүamples to understand how to interact with the VL53L3CX sensor using the provided software architecture.

Техник хангамж, програм хангамж дууслааview

Sample implementations are available for STM32 Nucleo development boards plugged into STM32 Nucleo expansion boards:

• NUCLEO-F401RE (or NUCLEO-L476RG or NUCLEO-U575ZI-Q) + X-NUCLEO-BNRG2A1 + X-NUCLEO-53L3A2
• NUCLEO-F401RE (or NUCLEO-L476RG or NUCLEO-U575ZI-Q) + X-NUCLEO-BNRG2A1 + X-NUCLEO-53L3A2

Bluetooth бага эрчим хүчийг өргөтгөх самбар

Техник хангамжийн тодорхойлолт

• The X-NUCLEO-BNRG2A1 is a Bluetooth Low Energy (BLE) evaluation and development board system, designed around ST’s BLUENRG-M2SP Bluetooth Low Energy module based on BlueNRG-2.
• The BlueNRG-2 processor hosted in the BLUENRG-M2SP module communicates with the STM32 microcontroller, hosted on the Nucleo development board, through an SPI link available on the Arduino UNO R3 connector.

Усан онгоцон дээрх гол бүтээгдэхүүн

• BLUENRG-M2SP Bluetooth Low Energy, FCC and IC certified (FCC ID: S9NBNRGM2SP, IC: B976C-BNRGM2SP), module based on Bluetooth® Low Energy wireless network processor BlueNRG-2, BLE v5.0 compliant.
• BLUENRG-M2SP integrates a BALF-NRG-02D3 balun and a PCB antenna. It embeds a 32 MHz crystal oscillator for the BlueNRG-2.
• M95640-RMC6TG 64-Kbit serial SPI bus EEPROM with high-speed clock interface

X- NUCLEO-53L1A2 Hardware Description

• The X-NUCLEO-53L3A2 is a ranging sensor with multi-target detection evaluation and development board designed around the VL53L3CX sensor based on ST FlightSense Time-of-Flight technology.
• VL53L3CX нь Arduino UNO R32 холбогч дээр байгаа I2C холбоосоор дамжуулан STM3 Nucleo хөгжүүлэгчийн самбарын хост микроконтроллертэй холбогддог.

Усан онгоцон дээрх гол бүтээгдэхүүн

• VL53L3CX Time-of-Flight (ToF) ranging sensor with multi-target detection
• 0.25, 0.5, and 1mm spacers to simulate air gaps, with the cover glass
• Cover window (made by Hornix) sample with low cross-talk,k ready to use / clipable on VL53L3CX
• Two VL53L3CX breakout boards

VL53L3CX-SATEL Тоног төхөөрөмжийн тодорхойлолт

• The VL53L3CX-SATEL breakout boards can be used for easy integration into customer devices. Thanks to the voltage зохицуулагч ба түвшний шилжүүлэгч, үүнийг 2.8 В-оос 5 В-ийн тэжээлтэй ямар ч хэрэглээнд ашиглаж болно.
• The PCB section supporting the VL53L3CX module is perforated so that developers can break off the mini-PCB for use in a 2.8 V supply application using flying leads.

Усан онгоцон дээрх гол бүтээгдэхүүн

• VL53L3CX Time-of-Flight (ToF) ranging sensor with witmulti-targetet detection
• Regulator: 5 to 2.8 V range input voltage (гаралтын ботьtage: 2.8 В)
• VL53L3CX signal interface level shifter

Тоног төхөөрөмжийн чухал нэмэлт мэдээлэл

BlueNRG-2 library does not work with the stock firmware that is loaded in the BLE module of the X-NUCLEO-BNRG2A1 expansion board.
Энэ шалтгааны улмаас:

• First of all, it is needed to solder on X-NUCLEO-BNRG2A1; if it is not soldered, a 0-ohm resistor at R117.
• Then you can use a standard ST-Link V2-1 with 5 jumper wires female-female together with the TSW-BNRGFLASHER software tool (currently available only for Windows PC) to update the firmware of the BLE module of X-NUCLEO-BNRG2A1.

Зурагт үзүүлсэн шиг X-NUCLEO-BNRG12A2-ийн J1 тээглүүрүүдийг ST-Link V2-1-ийн тээглүүрүүдэд холбож, дараагийн слайд дээрх алхмуудыг дагана уу.
In particular, we have the following connections:

	J12	ST-Link V2-1
Pin	1	1
Pin	2	9
Pin	3	12
Pin	4	7
Pin	5	15

1. Install the ST BlueNRG-1_2 Flasher Utility and open it, then select the SWD tab.b
2. Erase the flash memory of the BlueNRG-2 chip.
3. Download the Link Layer Only firmware for the BLE module from the following link: DTM_LLOnly. binn
4. Load the Link Layer Only firmware in the ST BlueNRG-1_2 Flasher Utility and then press the “Flash” button.
5. If you need to restore the stock firmware of the BLE module of X-NUCLEO-BNRG2A1, you can repeat the procedure using this firmware image DTM_Full.bi.n
6. If you should find some issues during the update process, you can try to repeat the procedure closing the J15 jumper on the X-NUCLEO-BNRG2A1 expansion board.

	VL53L3CX-SATEL	Arduino холбогч	NUCLEO-F401RE NUCLEO-L476RG	NUCLEO-U575ZI-Q
SCL	2	D15	PB8	PB8
SDA	4	D14	PB9	PB9
XSDN	3	D4	PB5	PF14
VDD_SENSOR	5	3V3	CN6 зүү n. 4	CN8 зүү n. 7
GND_X	6	GND	CN6 зүү n. 6	CN8 зүү n. 11

Програм хангамжийн тодорхойлолт

• The FP-SNS-FLIGHT1 is an STM32Cube function pack, which lets your IoT node connect to a smartphone via BLE and uses a suitable Android or iOS application like the STBLESensor app to view Нислэгийн цаг мэдрэгчээр уншдаг бодит цагийн объектын зайны өгөгдөл.
• The package also enables advanced functions, such as presence detection within a fixed range.
• This package, together with the suggested combination of the STM32 and ST devices, can be used to develop wearable applications or smart thing applications in general.
• The software runs on the STM32 microcontroller and includes all the necessary drivers to recognize the devices on the STM32 Nucleo development board.

Гол онцлогууд

• Complete firmware to develop an IoT node with BLE connectivity, and Time-of-Flight sensors
• Compatible with STBLESensor application for Android/iOS to perform distance data reading and firmware update (FOTA)
• Multitarget ranging sensor application based on the VL53L3CX Time-of-Flight (ToF) sensor
• Sample implementation available for X-NUCLEO-53L3A2 (or VL53L3CX-SATEL) and X-NUCLEO-BNRG2A1 connected to a NUCLEO-F401RE or NUCLEO-L476RG or NUCLEO-U575ZI-Q
• Compatible with STM32CubeMX, can be downloaded from and installed directly into STM32CubeMX
• STM32Cube-ийн ачаар янз бүрийн MCU гэр бүлүүдэд хялбар зөөвөрлөх боломжтой
• Чөлөөт хэрэглэгчийн ээлтэй лицензийн нэр томъёо

Тохируулах & Демо Examples

Програм хангамж болон бусад урьдчилсан нөхцөл

• STSW-LINK004
  • STM32 ST-LINK Utility (STSW-LINK004) is a full-featured software interface for programming STM32 microcontrollers
• FP-SNS-НИСЛЭГ 1
  • .zip-г хуулна уу file content of the firmware package into a folder on your PC.
  • Багц нь эх кодыг агуулнаamples (Keil, IAR, STM32CubeIDE) compatible with NUCLEO-F401RE, NUCLEO-L476RG, NUCLEO-U575ZI.
• ST BLE Sensor
  Application for Android (V5.2.0 or higher) /iOS (V5.2.0 or higher) to download from Google Store / iTunes

Тохиргоо дууслааview: Өргөтгөх самбар бүхий STM32 Nucleo 

Тохиргоо дууслааview

STM32 Nucleo өргөтгөлийн самбар бүхий HW урьдчилсан нөхцөл 

• 1 x Bluetooth Low Energy expansion board (X-NUCLEO-BNRG2A1)
• 1 x STM32 ranging sensor expansion board (X-NUCLEO-53L3A2 or VL53L3CX-SATEL)
• 1 x STM32 Nucleo development board (NUCLEO-U575ZI-Q or NUCLEO-F401RE or NUCLEO-L476RG)
• 1x Android or iOS device
• 1 x PC with Windows 10 and above
• 1x USB type A to Mini-B USB cable for NUCLEO-F401RE or NUCLEO-L476RG
• 1x USB type A to Micro-B USB cable for NUCLEO-U575ZI-Q

Хэдхэн минутын дараа код бичиж эхлээрэй (1/3)

Хэдхэн минутын дараа код бичиж эхлээрэй (2/3)

1. How to install the pre-compiled binary:
   • For each application, there is inside the package one folder called “Binary”

Үүнд:

• NUCLEO-F401RE болон NUCLEO-L476RG-д:
  • pre-compiled FP-SNS-FLIGHT1 FW that could be flashed to a supported STM32 Nucleo for X-NUCLEO-53L3A2 using the STM32CubeProgrammer at the right position (0x08004000)
  • Important Note: This pre-compiled binary is compatible with the FOTA update procedure
  • pre-compiled FP-SNS-FLIGHT1 + BootLoader FW that could be directly flashed to a supported STM32 Nucleo for X-NUCLEO-53L3A2 using the STM32CubeProgrammer or by doing “Drag & Drop”
  • Important Note: This pre-compiled binary is not compatible with the FOTA update procedure
  • pre-compiled FP-SNS-FLIGHT1 FW that could be directly flashed to a supported STM32 Nucleo for VL53L3CX-SATEL using the STM32CubeProgrammer or by doing “Drag & Drop”
• NUCLEO-U575ZI-Q-д:
  • pre-compiled FP-SNS-FLIGHT1 could be directly flashed to a supported STM32 Nucleo (for X-NUCLEO-53L3A2 and for VL53L3CX-SATEL) using the STM32CubeProgrammer or by doing “Drag & Drop”.
  • Important Note: For the first installation, after the full flash erase (suggested procedure), use the STM32CubeProgrammer to set the STM32 MCU user byte settings to use bank 1 for flashing the firmware and start the application

How to install the code after compiling the project for NUCLEO-F401RE and NUCLEO-L476RG:

• Compile the project with your preferred IDE

In the folder Utilities, there is a script *.sh that performs the following operations:

• Full Flash Erase
• Flash the right BootLoader at the right position (0x08000000)
• Flash the FLIGHT1 firmware at the right position (0x08004000)
  • This is the firmware that was compiled with the IDE
  • This firmware is compatible with the FOTA update procedure
• Save a complete Binary FW that includes both FLIGHT1 and the BootLoader
  • This binary can be directly flashed to a supported STM32 board using the ST-Link or by doing “Drag & Drop.”
  • Important Note:Thiss additional pre-compiled binary is not compatible with the FOTA update procedure

Before executing the *.sh script, it is necessary to edit it to set the installation path for STM32CubeProgrammer.
BootLoaderPath and BinaryPath as input are required when executing the .sh script.

Flash менежмент ба ачаалах процесс

Bluetooth бага эрчим хүч, мэдрэгчийн програм хангамж

NUCLEO-F1RE / NUCLEO-L401RG / NUCLEO-U476ZI-Q-д зориулсан FP-SNS-FLIGHT575 – Цуваа шугамын монитор (egTera Term) 

Демо Examples ST BLE мэдрэгчийн хэрэглээ дууссанview

Android/iOS-д зориулсан ST BLE мэдрэгчтэй програм (1/5)

Hardware Features – Android Version

Android/iOS-д зориулсан ST BLE мэдрэгчтэй програм (2/5)

Hardware Features – Android Version

ЖИЧ
The presence is identified inside a fixed range of distances that can be modified by the line code:

• #define PRESENCE_MIN_DISTANCE_RANGE 300
• #define PRESENCE_MAX_DISTANCE_RANGE 800

-д file FLIGHT1_config.h.h, which can be found in the Inc users folder for each project.

Android/iOS-д зориулсан ST BLE мэдрэгчтэй програм (3/5)

Board Configuration – Android version

Android/iOS-д зориулсан ST BLE мэдрэгчтэй програм (4/5)

Debug Console – Android version

Android/iOS-д зориулсан ST BLE мэдрэгчтэй програм (4/5)

Firmware Upgrade – Android version

Android/iOS-д зориулсан ST BLE мэдрэгчтэй програм (5/5)

Бичиг баримт, холбогдох эх үүсвэрүүд

FP-SNS-НИСЛЭГ 1: 

• DB2862: STM32Cube function pack for IoT node with NFC, BLE connectivity, and time-of-flight sensors – data brief
• UM2026: Getting started with the STM32Cube function pack for IoT node with NFC, BLE connectivity, and time-of-flight sensors – user manual
• Програм хангамжийн тохиргоо file

X-NUCLEO-BNRG2A1

• Гербер files, BOM, Schematic
• DB4086: Bluetooth Low Energy expansion board based on the BLUENRG-M2SP module for STM32 Nucleo – data brief
• UM2667: Getting started with the X-NUCLEO-BNRG2A1 BLE expansion board based on BLUENRG-M2SP module for STM32 Nucleo – user manual

X- NUCLEO-53L3A2:

• Гербер files, BOM, Schematic
• DB4226: Time-of-Flight ranging sensor with multi-target detection expansion board based on VL53L3CX for STM32 Nucleo – data brief
• UM2757: Getting started with X-NUCLEO-53L3A2 multi target ranging ToF sensor expansion board based on VL53L3CX for STM32 Nucleo – user manual

VL53L3CX-SATEL:

• Гербер files, BOM, Schematic
• DB4194: VL53L3CX breakout board Time-of-Flight ranging sensor with multi-target detection – data brief
• UM2853: How to use the VL53L3CX with STMicroelectronics’ X-CUBE-TOF1 Time-of-Flight sensor software packages for STM32CubeMX – user manual

Зөвлөх www.st.com бүрэн жагсаалтын хувьд

STM32 Нээлттэй хөгжлийн орчин: Дууссанview

STM32 Open Development Environment: Fast, affordable Prototyping and Development

The STM32 Open Development Environment (STM32 ODE) is an open, flexible, easy, and affordable way to develop innovative devices and applications based on the STM32 32-bit microcontroller family combined with other state-of-the-art ST components connected via expansion boards. It enables fast prototyping with leading-edge components that can quickly be transformed into final designs

Нэмэлт мэдээлэл авахыг хүсвэл зочилно уу www.st.com/stm32od.e

Баярлалаа

© STMicroelectronics – Бүх эрх хуулиар хамгаалагдсан.

STMicroelectronics корпорацийн лого нь STMicroelectronics групп компаниудын бүртгэлтэй худалдааны тэмдэг юм. Бусад бүх нэр нь тус тусын эздийнхээ өмч юм.

Байнга асуудаг асуултууд

• А: Би VL53L3CX-SATEL хавтанг бусад хөгжүүлэлтийн самбаруудтай хамт ашиглаж болох уу?
  A: The VL53L3CX-SATEL board is designed to be compatible with STM32 Nucleo development boards, ensuring optimal performance and functionality
• А: Би VL53L3CX-SATEL самбар дээрх программыг хэрхэн шинэчлэх вэ?
  A: Firmware updates can be performed using the FOTA feature. Refer to the latest information available at www.st.com fordetailed instructions on firmware updates.

Баримт бичиг / нөөц

ST STM32Cube IoT зангилаа BLE функцийн багц [pdf] Хэрэглэгчийн гарын авлага NUCLEO-F401RE, NUCLEO-L476RG, NUCLEO-U575ZI-Q, X-NUCLEO-BNRG2A1, XNUCLEO-53L3A2, VL53L3CX-SATEL, STM32Cube IoT зангилаа BLE Function Pack, BLE Function Packde, TM32TC багц, Функцийн багц

Лавлагаа

• Хэрэглэгчийн гарын авлага