1. Танилцуулга
The AUTOOL DM303 is a versatile hand-held automotive diagnostic multimeter that integrates the functions of a digital oscilloscope and a digital multimeter. Designed with embedded digital control technology, it provides comprehensive diagnostic capabilities for various automotive electrical systems. This device is ideal for professional technicians and automotive enthusiasts for accurate and efficient vehicle maintenance and troubleshooting.
2. Үндсэн шинж чанарууд
The AUTOOL DM303 offers a wide range of diagnostic functions:
- DC/AC Voltage Хэмжилт
- DC/AC гүйдлийн хэмжилт
- Эсэргүүцлийн туршилт
- Давтамжийн хэмжилт
- Осциллографын туршилт
- Automotive Circuit Test
- Car Start-up Test
- Injector Test
- Automobile Relay Test
- Analog Signal Test
- Ignition Pulse Signal Test
- K/CAN Line Data Analysis
The device features a 2.8-inch color LCD screen with a resolution of 320*240, offering adjustable brightness for clear and intuitive data display in various working environments.
It supports 13 languages: Deutsch, Spanish, French, Italian, English, Japanese, Portuguese, Dutch, Polish, Russian, Korean, Chinese, and Traditional Chinese.
3. Багцын агуулга
The AUTOOL DM303 comes with the following items, neatly stored in a portable toolbox:
- AUTOOL DM303 Main Unit
- Multi-functional Detection Line (C01-1 to C01-SIN, C01-S1, C01-S2)
- Battery Clip Line (C02)
- Ignition Pulse Signal Detection Line (C03)
- Probe Terminal (C04-2)
- Jumper (Black) (C05)
- Jumper (Green) (C06)
- Jumper (Yellow) (C07)
- Хэрэглэгчийн гарын авлага
- Зөөврийн хэрэгслийн хайрцаг
4. Бүтээгдэхүүн дууссанview
The DM303 is designed for ease of use and durability. Below is an overview түүний үндсэн бүрэлдэхүүн хэсгүүдээс:
- Дэлгэцийг харуулах: 2.8-inch color LCD.
- Эрчим хүчний үзүүлэлт: Төхөөрөмжийн тэжээлийн төлөвийг заана.
- Эрчим хүчний түлхүүр: Төхөөрөмжийг асаах/унтраах.
- Hold key: Freezes the current reading on the screen.
- Чиглэлийн түлхүүр: Used for navigation within menus.
- Буцах түлхүүр: Өмнөх цэс эсвэл дэлгэц рүү буцна.
- Оруулах түлхүүр: Сонголтыг баталгаажуулах эсвэл цэс рүү орно.
- 10A current input: Input jack for high current measurements.
- mA/uA measurement input: Input jack for low current measurements.
- Lighting key: Activates the device's built-in light.
- ZERO / F1 Function key: Zeroes readings or acts as Function 1.
- F2 Function key: Acts as Function 2.
- Measurement mode switching: Хэмжилтийн янз бүрийн горимд шилжих товчлуур.
- Диод, ботьtage, resistance, frequency measurement input: Common input jack for these functions.
- COM measurement input: Common ground input jack.
- DB15 интерфейс: Connector for specialized diagnostic cables.
- SD card slot / data interface: For software updates and data storage.
- Гэрэл: Built-in light for illuminating work areas.
- Арын хаалт: Allows the device to stand upright for hands-free operation.
5. Техникийн үзүүлэлтүүд
| Атрибут | Үнэ цэнэ |
|---|---|
| Загварын нэр | DM303 |
| Брэнд нэр | Autory |
| Гарал үүсэл | Эх газрын Хятад |
| Баталгаажуулалт | CE |
| Гадаад туршилтын гэрчилгээ | ce |
| Өнгөт дэлгэц | 2.8 инчийн LCD |
| Шийдвэр | 320*240 |
| Ботьtage Хэмжилтийн хүрээ | Тогтмол гүйдэл 0-1000В, хувьсах гүйдэл 0-700В |
| Одоогийн хэмжлийн хүрээ | 0-20A, 0-200mA |
| Эсэргүүцлийн хэмжилтийн хүрээ | 0-1МΩ |
| Давтамжийн хэмжилтийн хүрээ | 1Гц-1МГц |
| Automotive Circuit Drive Current | 0-5A |
| Injector Drive Signal Output | 500-6000 эрг / мин |
| Ажлын температур | 0~40°C (32~104°F) Humidity: ≤75% |
| Хадгалах температур | 10~50°C (14~122°F) Humidity: ≤70% |
| Өндөр | 2000м |
| Зүйлийн урт | 26 см |
| Зүйлийн өргөн | 20 см |
| Зүйлийн өндөр | 11 см |
| Зүйлийн жин | 1.7 кг |
| Input Impedance (Voltage) | 2~3MΩ (<160V); 10MΩ (>160V) |
| Хамгийн их оролтын хэмжээtage | 1000Vpp |
| Аналог зурвасын өргөн | 500 кГц |
| 10A Terminal Fuse | 15A self-recovery fuse (Max 20A) |
| mA/uA Terminal Fuse | 0.5A self-recovery fuse (Max 200mA) |
6. Тохируулах гарын авлага
6.1 Батерей суурилуулах
The AUTOOL DM303 is not equipped with batteries for logistics and transportation reasons. You will need to purchase 4pcs 1.5A batteries (AA size) or a 3.7V, 1200 mAh lithium battery separately.
- Төхөөрөмжийн арын хэсэгт зайны тасалгааг ол.
- Зайны тасалгааны тагийг нээ.
- Insert 4pcs 1.5A batteries, ensuring correct polarity (+/-).
- Зайны тасалгааны тагийг сайтар хаа.
Жич: Without batteries, the device will turn off automatically when disconnected from the charging cable.
6.2 Асаах/унтраах
-г удаан дар Асаах түлхүүр (labeled '3' in the Product Overview diagram) to turn the device ON or OFF.
7. Ашиглалтын заавар
The AUTOOL DM303 features an intuitive interface for selecting and performing various tests. Use the Чиглэлийн түлхүүрүүд (5) to navigate through menus and the Түлхүүрийг оруулна уу (7) to confirm selections.
7.1 Ерөнхий навигаци
- -г ашиглана уу Чиглэлийн түлхүүрүүд (Up, Down, Left, Right) to move the cursor or change values.
- дарна уу OK (Enter key) to select an option or confirm an action.
- дарна уу ESC (Return key) to go back to the previous screen or cancel an operation.
- Ашиглах F1 (ТЭГ) ба F2 for specific function adjustments as indicated on the screen.
- The БАРЬ key (4) can be used to freeze the current measurement on the display.
7.2 Мультиметрийн горим
Select 'Multimeter' from the main menu. This mode allows you to measure AC/DC voltage, current, resistance, diode forward voltage drop, on-off continuity, and frequency. Connect the appropriate probes to the device's input jacks (8, 9, 14, 15) and to the circuit under test.
7.3 Осциллографын горим
Select 'Oscilloscope' from the main menu. This mode provides a complete intelligent measurement system for signal input, data sampling, processing, and automatic search. It has a waveform test bandwidth of 500KHz and a variable sampling frequency for measuring slowly varying signals. It is suitable for observing various automotive signals such as engine ignition pulse, camshaft, crankshaft, wheel speed sensor, and oxygen sensor signals.
7.4 Automotive Circuit Test
This function allows online testing of low voltage circuits, detection of high voltage or line leakage, and output of power supply voltage. It can also output power voltage to test car components or lower voltage to drive components like lights. It can test battery voltage during vehicle startup to assess the starting system and battery condition.
7.5 Car Start-up Test (Cranking Test)
Connect the device to the vehicle's battery using the appropriate cables. Select 'Cranking Test' from the menu. The device will monitor current and minimum voltage during engine cranking to evaluate the battery and starter motor performance.
7.6 Injector Test
Connect the injector to the device using the specialized terminals (C01-2). Select 'Injector Test' to simulate engine speed and drive the fuel injection nozzle, allowing for functional testing of the injector.
7.7 Automobile Relay Test
Connect the relay to the device using the specialized terminals (C01-2). Select 'Relay Test' to check the output status and contact resistance of the relay.
7.8 Analog Signal Test
This function is used for car ECU detection. It can simulate square wave and sine wave outputs, which can be used to test ECU inputs or drive certain components.
7.9 Ignition Pulse Signal Test
Use the Ignition Pulse Signal Detection Line (C03) to connect to the ignition system. Select 'Ignition Pulse Signal Test' to analyze the ignition pulse waveform and characteristics.
7.10 K/CAN Line Data Analysis
Connect the device to the vehicle's K-line or CAN bus using the appropriate cables (C01-K, C01-CAN+, C01-CAN-). Select 'K/CAN Line Data' to monitor and analyze data signals on these communication lines.
7.11 Давтамжийн хэмжилт
Select 'Frequency Measurement' from the multimeter mode or a dedicated frequency function. Connect the probes to the signal source to measure its frequency.
8. Засвар үйлчилгээ
8.1 Програм хангамжийн шинэчлэл
The instrument supports software updates via an SD card. To update the software:
- Download the latest application software file from the official AUTOOL webсайт.
- Татаж авсаныг хуулна уу file SD карт руу.
- Insert the SD card into the device's SD card slot (17).
- Програм хангамжийн шинэчлэлтийг дуусгахын тулд дэлгэцэн дээрх зааврыг дагана уу.
8.2 Цэвэрлэгээ ба хадгалах
- Төхөөрөмжийг цэвэр, хуурай байлга. Зөөлөн ашиглах, damp гадна талыг арчих даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
- Ensure all ports and connectors are free from dust and debris.
- When not in use, store the main unit and all accessories in the provided portable toolbox. The toolbox is designed to protect the instrument from falls and impacts.
9. Алдаа засах
- Төхөөрөмж асахгүй байна: Check if batteries are correctly installed and charged. Ensure the power key is pressed and held sufficiently.
- Буруу уншилтууд: Verify that all connections are secure and probes are properly attached to the circuit. Ensure the correct measurement mode is selected.
- Screen is dim or unreadable: Adjust the screen brightness through the device settings.
- Төхөөрөмж гацах эсвэл хариу өгөхөө болих үед: Try restarting the device by holding the power key. If the issue persists, ensure the software is up to date.
10. Хэрэглэгчийн зөвлөмж
- Always ensure the device is powered off before connecting or disconnecting probes to prevent accidental short circuits or damage.
- For precise current measurements, especially low currents, ensure the circuit is properly isolated and the correct input jack (10A or mA/uA) is used.
- When using the oscilloscope function, familiarize yourself with typical waveforms for the components you are testing to quickly identify anomalies.
- Utilize the back bracket (19) for hands-free operation, especially when working in tight engine compartments.
11. Баталгаат хугацаа ба дэмжлэг
The AUTOOL DM303 comes with a 3-year warranty, ensuring quality assurance. For technical support, service, or warranty claims, please contact your authorized AUTOOL dealer or visit the official AUTOOL webхолбоо барих мэдээлэл авах сайт.
