Pracmanu 30m Mini Laser Distance Meter

1. Танилцуулга

Thank you for choosing the Pracmanu 30m Mini Laser Distance Meter. This compact and high-precision digital laser rangefinder is designed for quick and accurate distance measurements, making it an essential tool for construction, DIY projects, and professional use. Please read this manual carefully before using the device to ensure safe and optimal operation.

2. Аюулгүй байдлын мэдээлэл

2.1 Лазерын аюулгүй байдал

This device uses a Class II laser. Observe the following safety precautions:

• Лазер туяа руу шууд ширтэж болохгүй.
• Лазер туяаг хүн, амьтан руу чиглүүлж болохгүй.
• Нүдний лазер туяанд шууд өртөхөөс зайлсхий.
• Төхөөрөмжийг задлах, өөрчлөхийг хориглоно.

2.2 Батерейны аюулгүй байдал

• Use only the specified charging adapter (5V==1A).
• Төхөөрөмжийг хэт өндөр температур эсвэл нарны шууд тусгалд бүү тавь.
• Do not attempt to replace the built-in lithium battery.
• Төхөөрөмжийг ус, чийгээс хол байлга.

Disclaimer: Accidents caused by failure to charge according to the specified requirements are not the responsibility of the manufacturer.

3. Багцын агуулга

Бүх зүйл багцад байгаа эсэхийг шалгаарай:

• Pracmanu 30m Mini Laser Distance Meter
• USB цэнэглэгч кабель
• User Manual (this document and a more detailed PDF version)

4. Бүтээгдэхүүн дууссанview

The Pracmanu Mini Laser Distance Meter features a clear digital display and intuitive controls for ease of use.

4.1 Төхөөрөмжийн бүрэлдэхүүн хэсгүүд

• Дэлгэц: Shows measurement results, battery status, and measurement mode.
• MEAS товч: Initiates single or continuous measurements.
• CLEAR / Power Button: Clears current measurement or powers the device on/off.
• USB-C цэнэглэх порт: Дотоод зайг цэнэглэхэд зориулагдсан.

5. Тохиргоо

5.1 Төхөөрөмжийг цэнэглэх

The device is equipped with a built-in 3.7V 350mAh lithium battery. Before first use, or when the battery indicator shows low power, charge the device using the provided USB cable.

1. Connect the USB charging cable to the device's USB-C port.
2. Connect the other end of the USB cable to a power adapter (5V==1A recommended) or a computer USB port.
3. During normal charging, the LED indicator light on the device will remain on.
4. Once the battery is fully charged, the LED indicator light will turn off.

6. Ашиглалтын заавар

6.1 Асаах/унтраах

• Төхөөрөмжийг асаахын тулд товчийг дараад барина уу CLEAR / Power товч.
• Төхөөрөмжийг унтраахын тулд товчлуурыг удаан дарна уу CLEAR / Power дахин товчлуур.

6.2 Нэг хэмжилт

For a quick, one-time distance reading:

1. Төхөөрөмж асаалттай байгаа эсэхийг шалгаарай.
2. Лазерыг зорилтот гадаргуу руу чиглүүлнэ.
3. дээр дарна уу MEAS button. The measurement will be displayed on the screen.

6.3 Тасралтгүй хэмжилт

For dynamic measurements, such as finding maximum or minimum distances while moving the device:

1. Төхөөрөмж асаалттай байгаа эсэхийг шалгаарай.
2. Activate continuous measurement mode (typically by a short press of the MEAS button after power on, or a double-press, refer to on-screen icons).
3. Move the device slowly across the area you wish to measure. The device will automatically calculate and display the maximum and minimum values encountered during the movement.

6.4 Measurement Reference

The device measures from its rear reference point. When taking measurements, ensure you account for the device's physical length if measuring from an edge or corner where the device itself occupies space.

6.5 Measurement Unit

The default measurement unit is meters (m).

7. Засвар үйлчилгээ

• Төхөөрөмжийг зөөлөн, damp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
• Keep the laser lens clean to ensure accurate measurements.
• Төхөөрөмжийг нарны шууд тусгал, хэт температураас хол, хуурай газар хадгална.
• Recommended storage temperature: -20°C to 60°C.

8. Алдаа засах

Төхөөрөмж асахгүй эсвэл цэнэглэгдээгүй байна:

Ensure the USB cable is securely connected and the power adapter meets the 5V==1A requirement. Check if the LED indicator light is on during charging.

Буруу хэмжилт:

Verify that the laser path to the target is clear and unobstructed. Ensure the device is held steady. Remember that the device measures from its rear reference point.

How to perform continuous measurement?

After powering on, activate continuous measurement mode (refer to on-screen icons or a quick press of the MEAS button). Move the device slowly to capture max/min values.

9. Техникийн үзүүлэлтүүд

10. Хэрэглэгчийн зөвлөмж

• Хэмжилтийн лавлагаа: Always remember that the device measures from its rear. When measuring from a wall or an object's edge, factor in the device's length for precise results.
• Тасралтгүй хэмжилт: For best results when using continuous measurement, move the device slowly and steadily across the desired path. This allows the device to accurately capture the maximum and minimum distances.
• Цэнэглэж байна: Use a standard 5V/1A USB charger for optimal charging speed and battery longevity.

11. Баталгаат хугацаа ба дэмжлэг

This product is covered by a standard manufacturer's warranty. For specific warranty terms, service, or technical support, please refer to the detailed user manual PDF or contact your retailer.

A comprehensive user manual in PDF format is available for download and reference:

View Бүрэн хэрэглэгчийн гарын авлага (PDF)